Products

Hoist Intercom for Construction Site Communication Hoistcom

China Hoist Intercom for Construction Site Communication Hoistcom, Find details about China Hoist Intercom, Interom from Hoist Intercom for Construction Site Communication Hoistcom

Lift Mechanism
Mast Section
Attendant
Without Attendant
Deceleration Device
With Deceleration Device
Elevator Door
Straight Fractional Door
Lifing Speed
40 M/Min
Cabin Size
3.2 X 1.5 X 2.5 M (L*W*H)
Mast Section
650 X 650 X 1508mm
Trademark
ANKA
Transport Package
Container Sea Freight Packing
Specification
CE
Origin
China
HS Code
8428
Lift Mechanism
Mast Section
Attendant
Without Attendant
Deceleration Device
With Deceleration Device
Elevator Door
Straight Fractional Door
Lifing Speed
40 M/Min
Cabin Size
3.2 X 1.5 X 2.5 M (L*W*H)
Mast Section
650 X 650 X 1508mm
Trademark
ANKA
Transport Package
Container Sea Freight Packing
Specification
CE
Origin
China
HS Code
8428
HOIST INTERCOM FOR CONSTRUCTION SITE COMMUNICATION

 
HoistCom system is a construction INTERCOM communication system, specifically designed to provide a fail-safe, dedicated link between the signalmen and operator. The system features a Two-Way communication system and enables site operatives to communicate directly with the Hoist operator.

HoistCom system is easy to install and will operate on any elevator/hoist with a power or steel wire cable going from the base to the car. No antenna wires are needed. Signal is transmitting between the car and building floor units by inducing onto the ground leg of power cable or around the whole cable

FEATURES

  • Intuitive operation.
  • Heavy duty Nylon plastic custom designed enclosure.
  • Easy to install, multiple choices for mounting onto walls, tie-wraps or screws can be used.
  • Emergency Alarm used to send an ALARM tone to all Com Units in an emergency.
  • Uses existing wiring with our specially designed Toroid, Transmitter/ Receiver coupling, to inductively couple an FM modulated signal onto existing power cables, which cables, safety lines etc.
  • Three field programmable frequency channels to eliminate voice bleed over between hoists. Channel 2 & 3 are high frequency channels designed to prevent EMI electrical interference noise caused by VFD (Variable frequency drive hoist systems).
 
Hoist TypeMain Specification
MODELPayload(kg)Speed (m/min) 
Single cageSC100TD100036 
SC200TD200036 
Twin cageSC100/100TD2×100036 
SC200/200TD2×200036 
Single cageSC100GD10000-40 
SC200GD20000-40 
Twin cageSC100/100GD2×10000-40 
SC200/200GD2×20000-40 
Single cageSC120GZ12000-63 
SC200GZ20000-63 
SC270GZ27000-63 
Twin cageSC120/120GZ2×12000-63 
SC200/200GZ2×20000-63 
SC270/270GZ2×27000-63 
Single cageSC200G20000-96 
SC270GS27000-96 
Twin cageSCD200/200G2×20000-96 
SCD270/270G2×27000-96 
SCD320/320G2×32000-96 













 

You Might Also Like