Aluminum Alloy 1060 3003 Aluminum Coil Cladding with Polykraft Moisture Barrier
China Aluminum Alloy 1060 3003 Aluminum Coil Cladding with Polykraft Moisture Barrier, Find details about China 3003 Aluminum, Aluminum Jacketing from Aluminum Alloy 1060 3003 Aluminum Coil Cladding with Polykraft Moisture Barrier
Basic Info.
Model NO.
3003
Surface Treatment
Color Coated
Alloy
Alloy
Width
0.3m-1.2m
Thick
0.1mm-1.2mm
Trademark
ISOKING
Transport Package
Pallet Package
Specification
0.2mm - 1.5mm thick
Origin
China
HS Code
7607200000
Model NO.
3003
Surface Treatment
Color Coated
Alloy
Alloy
Width
0.3m-1.2m
Thick
0.1mm-1.2mm
Trademark
ISOKING
Transport Package
Pallet Package
Specification
0.2mm - 1.5mm thick
Origin
China
HS Code
7607200000
Product Desciption
Product Description
ISOKING ALUMINUM CLADDING INTRODUCTION
*Polykraft consists of one layer of one mil polyethylene film with a protective layer of 80g/m2-120g/m2 virgin kraft paper.
*The moisture barrier is factory applied by attaching the jacketing by continuous lamination to the full width of the metal.
*The moisture barrier is used to prevent moisture and corrosives in the insulation from coming into direct contact with the metal jacketing surface and causing galvanic or chemical corrosionPolykraft consists of one layer of one mil polyethylene
*The moisture barrier is factory applied by attaching the jacketing by continuous lamination to the full width of the metal.
*The moisture barrier is used to prevent moisture and corrosives in the insulation from coming into direct contact with the metal jacketing surface and causing galvanic or chemical corrosionPolykraft consists of one layer of one mil polyethylene
SPECIFICATION
A. Alloy Offered: AA 1XXX, AA 3XXX, AA 5XXX, AA 8XXX
B. Temper Offered: O, H12, H14, H16, H18, H26, H46
C. Chemical Composition: The material chemical composition is checked with spectrometer and complies to ASTM B 209M-14 STANDARDS and BS EN STANDARDS.
D. Mechanical Composition: The material mechanical composition is checked with tensile test machine and complies to ASTM B 209M-14 STANDARDS and BS EN STANDARDS.
E. Applicable Standards For MILL FINISH : ASTM B-209M-14 and BSEN For COATED SHEET : ECCA/ASTM
B. Temper Offered: O, H12, H14, H16, H18, H26, H46
C. Chemical Composition: The material chemical composition is checked with spectrometer and complies to ASTM B 209M-14 STANDARDS and BS EN STANDARDS.
D. Mechanical Composition: The material mechanical composition is checked with tensile test machine and complies to ASTM B 209M-14 STANDARDS and BS EN STANDARDS.
E. Applicable Standards For MILL FINISH : ASTM B-209M-14 and BSEN For COATED SHEET : ECCA/ASTM
Alloy | Si | Fe | Cu | Mn | Mg | Zn | Ti | Others | Al |
3003 | 0.6 | 0.7 | 0.05-0.20 | 1.0-1.5 | - | 0.10 | - | 0.2 | remainder |
1060 | 0.25 | 0.35 | 0.05 | 0.03 | 0.03 | 0.05 | 0.03 | 0.03 | 99.6 |
3003 SERIES
ISOKING ALUMINUM CLADDING
1060 SERIES
ISOKING ALUMINUM CLADDING
INTRODUCTION
This is a very popular finish and is the "default" for the many end users/specifiers who prefer the clean look of this finish. This finish sheds rain water the best. However, this smooth surface readily shows damage such as from hail or other physical abuse. It also shows the dirt more than the other finishes due to its smoothness. Lastly, it is highly reflective of sunlight and when located near roadways, some specifiers see this reflection as a possible safety hazard.
INTRODUCTION:
This is another popular finish used for aluminum jacketing. The stucco-like surface texture hides. small imperfections and scratches caused by physical damage during or after installation. This finish also reduces reflectivity while still looking very professional. Lastly, the use of stucco embossed finish provides a small increase to the rigidity and strength of the aluminum jacketing.
SPECIFICATIONS:
CORRUGATED (CROSS-CRIMPED) SURFACE FINISH
There are four corrugations available. The following drawings are measured in millimeter.
Type V4.8 ( 3/16"), Type V32 (1-1/4"), Type V65 ( 2-1/2") Type 820 ( box ribbed).
SPECIFICATIONS:
CORRUGATED (CROSS-CRIMPED) SURFACE FINISH
There are four corrugations available. The following drawings are measured in millimeter.
Type V4.8 ( 3/16"), Type V32 (1-1/4"), Type V65 ( 2-1/2") Type 820 ( box ribbed).
Type | Length (m) | THK (mm) | Covering width (mm) | Alloy No. Alloy No. | Surface finish | PFMB |
V4.8 | 20-30 | 0.4-1.0 | 1000 | 1060/3003 | Smooth/embossed | PSMB / PKMB |
V32 | 2-4 | 0.4-1.0 | 940 | 1060 /3003 | Smooth/embossed | PSMB / PKMB |
V65 | 2-4 | 0.4-1.0 | 900 | 1060/3003 | Smooth/embossed | PSMB / PKMB |
820 | 2-4 | 0.4-1.0 | 820 | 1060 /3003 | Smooth/embossed | PSMB / PKMB |
ISOKING ALUMINUM CLADDING SERIES PRODUCTION:
ISOKING ALUMINUM CLADDING
ISOKING ALUMINUM CLADDING WAREHOUSE
ISOKING Aluminum Cladding
You Might Also Like
Low Cost 2-8mm Coffee Husk Hen Feed Press for Pakistan
Nice Design 90km Mileage Electric Scooter with Front Basket
A356 Aluminum Sand Casting Parts
3-Blade Aluminum Outboard Propeller
Mercedes Benz W639 Vito Viano Air Compressor 6393200204 6393......
Made in China Metal Zinc Alloy Soft Enamel Sport Medallion C......
10t 30t 40t Locosc Shear Beam Weighing Load Cell for Weighbr......
4.1kwh Lithium Battery Wall Mount LiFePO4 24V 160ah Deep Cyc......
A3 Size DTG Tshirt Jeans Jackets Printer for Dark Light Colo......
PVC Co-Extrusion Foam Board with Cheaper Price
Superior Popular Art Fineliner Drawing Pen with Water Proof ......