Products

Copper Aluminum Wire Processing Continuous Extruding Machine

China Copper Aluminum Wire Processing Continuous Extruding Machine, Find details about China Copper Extrusion Machine, Aluminum Extrusion Machine from Copper Aluminum Wire Processing Continuous Extruding Machine

Main Motor
90kw/1000rpm
Rotation Speed
1-12 Rpm
Material
Clean of up Casting Copper Rod
Rod Diameter
12.5 mm-0.5 mm
Tensile Strength
<170n/ mm2
Min-Max Cross Sectional Area
10mm2~250mm2
Maximum Width
45 mm
Round Copper Rod
Max Dia 22mm, Min Dia 3mm
Output:(Average)
200-450kg/H
Flash Level: (Depending on Section Area
1-5%
Spooler Flange
800mm
Power Supply
AC 380 V, 3 Phases, 50 Hz, 150kVA
Compression Air
0.7MPa, 2m3/Min
Loop Cooling Water
>0.3MPa, 50m3/H
Trademark
SENERGE
Transport Package
Seaworthy Packaging
Specification
40 GP
Origin
Shanghai, China
Main Motor
90kw/1000rpm
Rotation Speed
1-12 Rpm
Material
Clean of up Casting Copper Rod
Rod Diameter
12.5 mm-0.5 mm
Tensile Strength
<170n/ mm2
Min-Max Cross Sectional Area
10mm2~250mm2
Maximum Width
45 mm
Round Copper Rod
Max Dia 22mm, Min Dia 3mm
Output:(Average)
200-450kg/H
Flash Level: (Depending on Section Area
1-5%
Spooler Flange
800mm
Power Supply
AC 380 V, 3 Phases, 50 Hz, 150kVA
Compression Air
0.7MPa, 2m3/Min
Loop Cooling Water
>0.3MPa, 50m3/H
Trademark
SENERGE
Transport Package
Seaworthy Packaging
Specification
40 GP
Origin
Shanghai, China
Copper Aluminum Wire Processing Continuous Extruding Machine

a. Wheel Diameter:                    300mm                                 
 Main Motor:                              90KW/1000rpm                        
 Rotation Speed:                          1-12 rpm
b. Feedstock
Material: Clean OF up casting copper rod
Rod Diameter:                          12.5 mm± 0.5 mm
Tensile strength                        <170N/ mm2                         
c. Product
Min-Max Cross Sectional Area:        10mm2~250mm2                       
Maximum Width:                      45 mm
Output:(average)                       200-450Kg/h                        
Flash level: (depending on section area and normal tooling)       1-5%
Spooler Flange:                          800mm                          
d. Plant Requirement
Power Supply:                            AC 380 V, 3 Phases, 50 Hz, 150KVA
Compression Air:                       0.7MPa, 2m3/min
Loop Cooling Water:                 >0.3MPa, 50m3/h
Space:                                          25m X 10m

The structure of the machine is the grooved wheel and shaft assembly. The main shaft is driven by an infinitely variable, thyristor controlled DC electric motor, via an epicyclical gearbox. The power output envelope from the drive is matched to the production rates specified by operator. There is mount roller bearings that incorporate multiple seals to retain oil and prevent the ingress of foreign material.
The Coining roll assembly to coin the feed rod firmly in the wheel groove.
The shoe contains the die-chamber assembly can be opened and closed easily by hydraulic cylinder, high pressure cylinder used to support the shoe in working position. With supplement tooling, the extrusion wheel of the machine can be replaced easily. Exchange chamber and die is also very fast.

Copper Aluminum Wire Processing Continuous Extruding Machine
Copper Aluminum Wire Processing Continuous Extruding Machine
Copper Aluminum Wire Processing Continuous Extruding Machine
Copper Aluminum Wire Processing Continuous Extruding Machine
Copper Aluminum Wire Processing Continuous Extruding Machine
Copper Aluminum Wire Processing Continuous Extruding Machine
Copper Aluminum Wire Processing Continuous Extruding Machine




 

You Might Also Like