Aerial Bundled Cable NFC 33209 Standard for overhead electrical wire cable 1*25mm2+54.6mm2
1, Standard and Scope of Application
The products adopt IEC 60502, it are mostly used for telecommunication systems or for power transmissions with voltages below 1000 volts. Aerial cable for voltages around 10000 volts have also been built, for the supply of farms, waterworks, transmitters and other facilities outside urban areas. Another common use is the replacement of overhead telecommunication lines, for example, along railway line,
2, Specific Property for Using
A), the min. temperature of laying cable is not lower than 20°C.
B), the Max. temperature of HDPE insulated cable is 150°C, and that of the XLPE insulated cable is 250°C when short circuit (5 seconds ).
C), the Max. long-time working temperature of conductor of the HDPE insulated cable is 75°C,and that of the XLPE insulated cable is 90°C.
D), Every fault time of single-phase earth shall be less than one minute. And that also shall be less than 8 hours per time and be less than 125hours every year.
E), the permissible curving radius of single-core cable should be not less than 20(D±d) ±5%mm, and that of the multi-core cable should be not less than 15(D±d) ±5%mm.
Specification
Type | Description | Application |
JKV | Rated voltage 1kV copper core PVC insulation aerial cable | Aerial fixed installation,lead door line |
JKY | Rated voltage 1kV copper core PEinsulation aerial cable |
JKYJ | Rated voltage 1kV copper core XLPEinsulation aerial cable |
JKLV | Rated voltage 1kV aluminum core PVC insulation aerial cable |
JKLYJ | Rated voltage 1kV aluminum core XLPE insulation aerial cable |
JKLJ | Rated voltage 1kV aluminum core PE insulation aerial cable |
JKLHY | Rated voltage 1kV Al alloy core PE insulation aerial cable |
JKLHV | Rated voltage 1kV Al alloy core PVC insulation aerial cable |
JKLHYJ | Rated voltage 1kV Al alloy core XLPE insulation aerial cable |