CNC Dual Spindle Drilling Machine for Plates

China CNC Dual Spindle Drilling Machine for Plates, Find details about China CNC Machine, Punching Machine from CNC Dual Spindle Drilling Machine for Plates

Basic Info.

Model NO.

PMD

Precision

Certification

CE, ISO 9001

Condition

New

Trademark

JUFU

Origin

China

Model NO.

PMD

Precision

Certification

CE, ISO 9001

Condition

New

Trademark

JUFU

Origin

China

Product Desciption

FApply scope:
This machine is suitable for drilling plate & pipe,baffle and flange in the petrochemical,boiler,refrigeration,wind power flange and
other industries.It can also be used in the drilling of connecting plate in the steel structure such as building,bridge,tower and so on.

Product structure characteristics:
1.The machine mainly consists of the bed and the longitudinal slide table,gantry and the horizontal slide table,the vertical
sliding pillow drilling power box,the work table,the electric control system,the hydraulic system,the cooling system,the chip
system,the centralized lubrication system and so on.
2.The machine adopts movable gantry and fixed worktable,save the floor area.
3.The machine bed and worktable are independent,which improves the stability of the equipment and effectively reduces the
vibration generated during high-speed drilling.
4.The longitudinal and lateral movements of machine tools are guided by precision roller linear guide,which greatly increases
the rigidity of the equipment.
5.The spindle motor uses a special servo motor to drive the spindle through the synchronous belt, stepless speed regulation,
low speed torque,can withstand heavy cutting load,and can be suitable for high-speed machining of hard alloy tools.
6.The main axis of drilling is Taiwan precision spindle (internal cooling),the main axis cone hole BT50,with a butterfly spring
automatic broaching mechanism,through the rod to install the drill or milling cutter,the hydraulic cylinder loose knife,the replacement
tool is very convenient.

Technical parameters:

Model		PMD3030	PMD3030/2	PMD4040/2	PMD5050/2
Processing size	L xW	3000x3000mm		4000x4000mm	5000x5000mm
Processing size	Max. thick.	300mm
Ram type drilling and milling powered head	Quan. of spindle	1	2	2	2
	Spindle taper	BT50(inner cooling)
	Speed of spindle	120-3200r/min
	Stroke of spindle	500mm
	Max. drilling dia.	¢50mm twist drill /¢40mm hard alloy
	Max. tapping dia.	M32mm
	Spindle torque	180/240/360 n≤600r/min
	Distance under the shaft	280-780mm
Electrical system	CNC control	Siemens808D	Siemens 828D	Siemens 828D	Siemens 828D
Dimension	L×W×H	7x6x3.5		8x7x3.5	10x8x3.5
Weight of machine		32	36	48	60