CNC Router Motor with Inverter 2.2kw High Speed 24000rpm Frequency 400Hz Kit 3 Bearings 7 Series Air Cooling Er16 Motor

China CNC Router Motor with Inverter 2.2kw High Speed 24000rpm Frequency 400Hz Kit 3 Bearings 7 Series Air Cooling Er16 Motor, Find details about China High Speed Spindle, 80mm Spindle Motor from CNC Router Motor with Inverter 2.2kw High Speed 24000rpm Frequency 400Hz Kit 3 Bearings 7 Series Air Cooling Er16 Motor

Basic Info.

Model NO.

Gdf80-24z-2.2

Certification

ISO9001, CCC

Brand

Hqd Qianchen Hanqi

Power

2.2kw

Voltage

220V 380V

Cooling

Air Cooled Spindle Motor

Frequency

400Hz

Trademark

HQD

Transport Package

Cartons

Specification

25*20*30cm

Origin

China

HS Code

8467991000

Model NO.

Gdf80-24z-2.2

Certification

ISO9001, CCC

Brand

Hqd Qianchen Hanqi

Power

2.2kw

Voltage

220V 380V

Cooling

Air Cooled Spindle Motor

Frequency

400Hz

Trademark

HQD

Transport Package

Cartons

Specification

25*20*30cm

Origin

China

HS Code

8467991000

Product Desciption

Cnc Router Motor With Inverter 2.2kw High Speed 24000rpm Frequency 400hz Kit 3 Bearings 7 Series Air Cooling ER16 Motor
Package includes

HQD 2.2kw 220v ER16 chuck round air-cooled spindle motor 1pcs +RITUO 2.2kw 220v vfd 1pc+80mm spindle holder 1pc +ER16, 8pcs

or HQD 2.2kw 380v ER16 chuck round air-cooled spindle motor 1pcs +RITUO 2.2kw 380v vfd 1pc+80mm spindle holder 1pc +ER16, 8pcs
GDF80-24Z/2.2
Speed: 24000RPM
Rated power: 2.2KW
Torque: 0.58Nm
Voltage: 220/380V
Current: 7.6/4.4A
Frequency: 400HZ
Shaft end connection: ER16-Φ3.175-Φ10.0
Cooling: air cooling
Lubrication: Grease
Bearing model: 2*7004C P4.1*7002C P4

Speed	24000RPM	Rated power	2.2KW
Voltage	220/380V	Current	7.6/4.4A
Frequency	400HZ	Shaft end connection	ER16-Φ3.175-Φ10.0
Cooling	air cooling	Bearing model	27004C P4.17002C P4

After receiving a new electric spindle, it will start at a low speed of 6000, and increase it by 3000 every ten minutes, until it can be used normally after 24000 revolutions. The bearings inside the new spindle need to be preheated and run-in, so remember! In addition, in order to prolong the service life of the spindle, it is best to start the spindle for a test run for 10-15 minutes during normal use.