ZM2152 Photovoltaic power generator
1.1 Overview
This training device includes modules such as solar power generation devices, photovoltaic panel power generation devices, inverters, and light-emitting controllers. Through related experiments, you can study the principles of solar and wind power generation, and cultivate students' corresponding knowledge and skills. It is suitable for vocational and vocational colleges , Secondary vocational school and technical school related professional teaching and skills assessment.
1.2 Features
(1) The training device adopts an aluminum column frame structure, and the power supply is integrated and installed.
(2) The unit circuit hanging box is fully configured and can be used in combination to complete the training content of various courses.
(3) The relevant units can be flexibly added to or deleted from the experimental subjects to meet the needs of different users.
(4) The device has a good safety protection system.
2 Performance parameters
(1) Input power: single-phase AC120V ± 10% 60Hz
(2) Dimensions: Dimensions: Wind power device: 1210mm × 1210mm × 2440mm
Solar power generation device: 1500mm × 1500mm × 2750mm
raining platform size: 1610mm × 800mm × 1350mm
(3) Overall capacity: <2KVA
(4) Weight: <280kg
(5) Working conditions:
Ambient temperature -10 ºC ~ + 40 ºC
Relative humidity < 85% (25 ºC)
3.Specific characteristics:
Battery: 12 volts and 100 amps / hour;
Frequency: 60 Hertz; Includes: Horizontal axis wind generator, microprocessor regulator, wind protection, electronic torque control, mounting kit and photovoltaic module;
Power: 600 Watt; Inverter input voltage: 12 volts direct current; Inverter output
voltage: 230 Volt; Additional
features: The body of the generator must be in aluminum and have at least three blades, The alternator must be of Brush less type with permanent magnets, It must have an output voltage of 12 Vdc in solar panel and wind turbine, The mast of the support it must be in stainless steel, the energy produced must be approx. 30 kWh / month with 5.8 m / s (13 mph) wind speed, Minimum wind speed for activation should be 3.6 m / s (8 mph), Maximum wind speed should be 49.2 m / s (110mph ), The peak power corresponding to the maximum radiation must be 115 W, It must have a support mounted on wheels and with adjustable inclination, Include charge regulator for photovoltaic panels, with a maximum current of 20 A, It must supply a current clamp with a voltage range (AC / DC); 0 to 600 V and a current range (AC / DC); 0 to 200 A, An inverter that has a modified sinusoidal output waveform must be delivered, in addition to stopping due to low battery charge and protection against overloads, short circuits and over temperatures
4 Product composition
4.1 platform
The power box contains the battery box, AC output, measuring instruments, AC power distribution panel, and circuit breaker and emergency stop switch. • Ability to generate, store and transform practices (DC to AC and AC to DC) in solar and wind energy
4.2 Wind turbines and photovoltaic panels
4.3 Blower and 600W Solar Simulator
Ability to simulate different wind speeds
4.4 Main supporting experimental hanging boxes and devices
(1) 1 controller box
Includes interface for collecting data over a WAN network or LAN
(2) 1 inverter box
(3) 4 instrument boxes
(4) 1 load box
5 can complete experimental training projects
1. Understanding of solar energy
2. Understanding of wind energy
3. Wind power training
4. Solar power training
5. Collection of training data for wind and solar power training