ZP6108 High Speed Directional Pulse Hole Metallizing Educational Equipment Didactic Equipment Vocational Training Equipment Teaching Equipment 


I. PCB Manufacturing Equipment Introduction
Structure
1. Use high speed pulse power source for plating, supply uniform good quality coating.
2. Fully ABS engineer plastic machine body and inner
Groove, with antiseptic, thermo stability, technology flow is beautiful.
3. Environment protection black hole technology flow application,
No pollution, it can direct discharge.
4. Cathode oscillation technology, prevent, concentration gradient, add hole inner liquid flowability.

Technical specification:
1. With 4 groove structure, with acid-washing, soak conducting resin, activate, electroplating function.
2. Use transparent flip function, it is easy to observe and storage.
3. Maximum board: 400× 400mm, it can electroplating
5 boards at the same time.
4. Minimum hole diameter: 0.3mm
5. Maximum thickness ratio 5: 1
6. Output frequency: 0-2kHz adjustable(it can change
As DC power)
7. Output current: Forward direction 0-5A, reverse 0-20A adjustable.

8. Pulse width: Use pulse directional power, forward direction 0-100%, reverse pulse 0 to 100% single adjustable.
9. Constantvoltage constant current: Current or voltage is
Constant, with self adjust function, 2 directional current
Real time display function.
10. Time setting: Work time preset function, time remaining display and automatic power off alarm.
11. LCD: 6 inch full color LCD, display all work specification.
12. Circuit protection: With short circuit, open circuit function, supply alarm signal.