The picture is only for reference
Pneumatic and electro-pneumatic bench Double-sided mobile workstation allows the assembly and operation of the various components without the use of tools (components equipped with quick assembly system)
1* Rolling table dimension between length 1200 mm, height 1700 mm and depth 800 mm minimum.
1* extruded and adonized aluminum plate of dimension between 1080 mm length and 680 mm depth minimum with the possibility of fixing the electrical components on both sides.

2* cabinet with a minimum of four drawers and locks 
1* cable guide
1 x power supply unit for mounting frame 220V AC- 24 VDC/ 4A minimum with minimum 6 outputs
1 x silent lubricated compressor for classroom use: protected by pressure switch and safety valve                                                                                                                                                           
Supply voltage 230V/50HZ
Operating pressure 7 bar minimum                                                                            
Suction flow rate 40 L/MIN minimum        
Tank volume 9 L minimum                                                                           
Outlet with pressure regulator, pressure gauge and quick coupler
Pre-actuator for manual and mechanical pressurization

2 push-button operated 3/2 NC spool valves
2 Push-button operated 3/2 NO dispensers
1 3/2 NC valve operated by emergency stop button
4 Distributors FC 3/2 NC roller-operated
2 NC 3/2 directional control valves operated by retractable roller
1 Switch operated 3/2 NC bistable valve
1 Push button operated 5/2 directional control valve
1 5/2-way valve with two-position selector switch
1 Closed center 5/3 valve operated by hook-in lever

Pneumatically operated pre-actuator
1 Pneumatically operated 3/2 NC monostable spool valve, 3/2 NC.
2 Pneumatically operated 5/2 monostable spool valves
2 Pneumatically operated 5/2 bistable valves
Signal processing, flow control and blocking
1 logic gate "OR".
1 "OR" circuit selector switch
1 "AND" logic gate
1 "AND" circuit selector switch
2 unidirectional flow throttles
1 Quick exhaust valve
1 Adjustable pneumatic timer with positive output
2 Flow regulators with pilot operated check valve
1 bi-directional flow restrictor
1 Sequence valve

Cylinders
2 Single-acting spring return cylinders
1 Double-acting cylinder with magnetic piston and elastic damping
Double acting magnetic piston cylinder with adjustable pneumatic damping
Electro dispensers
1 Solenoid valve, 3/2-way monostable NC (24 VDC coil with LED indicator)
1 Solenoid valve, 3/2 bistable (24 VDC coil with LED indicator)
2 Solenoid valves, 5/2 bistable (24 VDC coil with LED indicator)
2 Solenoid valves, 5/2 monostable (24 VDC coil with LED indicator)
1 Solenoid valve, 5/3 closed center (24 VDC coil with LED indicator)
1 Vacuum generator by suction effect with suction cup

Control modules/sensors
1 ON/OFF switch
1 Emergency stop push button (electric)
1 Set of electrical inputs (Box with 3 NO-NC pushbuttons)
1 Set of 3 relays (3 NO-3 NC, 24VDC coil)
1 Indicator (Indicators, ringer)
1 Set of 2 timer relays (2 NO- 2 NC)
1 Electrical connection terminal block
4 Magnetic detectors type Reed
2 Static magnetic detectors
1 Inductive sensor
1 Capacitive sensor
1 Photoelectric detector
4 Electric limit switch
1 Electrical contact pressure switch
Accessories
Set of 10 "T" Connectors Ø 4mm
Set of 10 plastic caps Ø 4mm
Set of 10 "Y" connectors Ø 4mm
1x 4 mm safety laboratory cable set (color red and blue) consisting of at least 80 cables
all pneumatic components must be equipped with Ø 4mm quick coupling