Products

Construction Machine VSI Crusher Wear Parts Rotor Tip Set

China Construction Machine VSI Crusher Wear Parts Rotor Tip Set, Find details about China Rotor Tip, Carbide Tip from Construction Machine VSI Crusher Wear Parts Rotor Tip Set

Grain Size
1.0 - 1.6μm
Usage
Crush Artificial Sand
Experience
18 Years
Trademark
Myloo
Transport Package
Standard
Specification
MT6Z
Origin
Zigong, China
HS Code
820900
Grain Size
1.0 - 1.6μm
Usage
Crush Artificial Sand
Experience
18 Years
Trademark
Myloo
Transport Package
Standard
Specification
MT6Z
Origin
Zigong, China
HS Code
820900

Construction machine VSI crusher wear parts rotor tip set
Compatiable with most brands of VSI crusher Sandvik, Metso, Terex, McCloskey, Cemco, Superior, Spokane,
Astec, Eagle, BHS, etc.

OEM &ODM are highly welcomed upon your drawing or sample.

Construction Machine VSI Crusher Wear Parts Rotor Tip Set
Why Do Our Rotor Bits And Carbide Bars Perform Much Better Than The Others?
Except standard grade, we custom-make Grade of the carbide by analyzing customer's local/site working 
conditions (e.g. feed size, type, gradation, hardness, screen size, etc).
That means we customize the grade from the first step mixing raw materials, control the temperature and
pressure when sintering, and finally use different welding techniques to make our wear parts suitable for
certain working condition.

What determine the life span of the parts:

Hardness of the carbide tipsWelding techniqueFeed size, gradation and capacityMaterial typeSpeed of rotor
It determines the wear-resistanceIt determines whether the carbide tips fall offbig or medium or smallHard / Medium / Soft(crushability)Exit velocity from rotor from 45 - 75m/s
There are many different types of grades according to different usageThe most important factors including the size and type of weld, edge preparation, metal thickness, reinforcement members and distortion, temperature etc.Low or high abrasivenessAt a slow rotor speed
Wet or DryAt a fast rotor speed
Pre-Crushed or natual rock 
At a slow rotor speedAt a fast rotor speed
Lower reduction ratioHigher reduction ratio
Less rotor wear More rotor wear
Higher capacity for set powerLower capacity for set power
Good shaping factorsExcellent shaping


The Ultimate Crushing Solution

VSI Crusher are unique due to its crushing process. Whereas most other type of crusher use metallic parts to
crush, VSI uses the rock fed into the machine to crush itself. This crushing process produces the best shaped
aggregates. The high velocity impact crushing achieved in VSI improves the shape of stone, reducing product
moisture and thus easing the screening operations. With rock-on-rock crushing action there is advantage of
cost savings, durability and unmatched performance in variety of crushing tasks.

 

VSI Rotor Tips

With tungsten carbide bar welded, the rotor tips are widely used to crush various kinds of materials, such as
Granite, Basalt,Limestone,Quartzite, Gneiss, Cement Clinker, Concrete Aggregate, Ceramic Materials, Iron Ore,
Gold Ore, Cooper Ore, Corundum, Bauxite, Silica etc.
 

Construction Machine VSI Crusher Wear Parts Rotor Tip SetConstruction Machine VSI Crusher Wear Parts Rotor Tip SetConstruction Machine VSI Crusher Wear Parts Rotor Tip SetConstruction Machine VSI Crusher Wear Parts Rotor Tip Set
Construction Machine VSI Crusher Wear Parts Rotor Tip SetConstruction Machine VSI Crusher Wear Parts Rotor Tip Set
Construction Machine VSI Crusher Wear Parts Rotor Tip SetConstruction Machine VSI Crusher Wear Parts Rotor Tip Set
Q&A:

1. Why You Say Your Tungsten Carbide Bars Have Much Better Performance?
-Coarse enough of grain size to be favorable for welding, especially in cold weather.
- Lower Cobalt without broken, longer wear-resistance.
    We never stop finding better grade with much longer wear-resistance to save clients' cost. Now we are testing
    new grade with coarse grain size for Europe market, it works well. Also we are making another 3 kinds of new
    grade to test and compare with current grade. If it goes well, next step we will try to test it for America market first.

2.How You Control the Quality of The Carbide Bars?
-Much strict control on scrap carbide to ensure stable quality of carbide powder.
   All is from qualified carbide rods with grain size 0.8-1.0um, like end mill, reamer, drills. Other carbide
   manufacturers usually use carbide drill bits or anvil with grain size 1.2/1.6/2.0 mixed.
-Our special creative sintering process to ensure uniform grain size 2.4um.
   Carbide manufacturers usually sinter it by Intermediate Frequency Furnace with temperature 1500ºC, that the
   heat-difference can be 70-80ºC causing non-uniform grain size. We use Vacuum Sintering Furnace with "secret"
   temperature without heat-difference to ensure uniform grain size 2.4um.

3.Do You Accept OEM&ODM?
    Yes, for sure, we can cutomize the grade and shape upon your drawings or samples. Such as, make the grain coarse or add
    more cobalt to increase its hardness. Make balance on hardness and toughness.

You Might Also Like