Products

ASTM D93 Pmcc Automatical Cutback Asphalt Closed Cup Flash Point Tester

China ASTM D93 Pmcc Automatical Cutback Asphalt Closed Cup Flash Point Tester, Find details about China Open Cup Flash Point Tester, Cleveland Open Cup Flash Point Tester from ASTM D93 Pmcc Automatical Cutback Asphalt Closed Cup Flash Point Tester

Model NO.
GD-3635D
Loading Method
Dynamic Load
Display
Digital
Control
Computer Control
Weight
0-100Kg
Power Source
AC220V
Oil Cylinder Position
Under
Power Supply
AC(220±10%)V, 50Hz.
Heating Device
Quartz Tube Furnace Heating, No Naked Fire
Test Flame Applicator
It Applies The Test Flame Automatically.
Thermometer
(-6~400)&Ordm
Igniting Device
1.Ignition Source: Coal Gas 2.Lame Diameter Is 3.2
Ambient Temperature
(-10-50)ºC
Relative Humidity
≤85%
Maximum Power Consumption
650W
Trademark
GOLD
Transport Package
Wooden Case
Specification
350mm*290mm*350mm
Origin
China
Model NO.
GD-3635D
Loading Method
Dynamic Load
Display
Digital
Control
Computer Control
Weight
0-100Kg
Power Source
AC220V
Oil Cylinder Position
Under
Power Supply
AC(220±10%)V, 50Hz.
Heating Device
Quartz Tube Furnace Heating, No Naked Fire
Test Flame Applicator
It Applies The Test Flame Automatically.
Thermometer
(-6~400)&Ordm
Igniting Device
1.Ignition Source: Coal Gas 2.Lame Diameter Is 3.2
Ambient Temperature
(-10-50)ºC
Relative Humidity
≤85%
Maximum Power Consumption
650W
Trademark
GOLD
Transport Package
Wooden Case
Specification
350mm*290mm*350mm
Origin
China

Lab Oil Test Equipment astm d93 pmcc Automatical Cutback Asphalt Closed Cup Flash Point Tester

 

  • Introduction: 

 

Asphalt Oil flash point tester is designed and manufactured as per standards GB/T 261-2008 Determination of Flash Point - Pensky-Martens 

Closed Cup Method and ASTM D93 Standard Test Method for Flash Point by Pensky-Martens Closed Cup Tester. 

 

It is used to make determination of the closed cup flash point of the petroleum products.

 

These test methods are applicable for the detection of contamination of relatively nonvolatile or nonflammable materials with volatile or flammable materials.

  • Specifications:
1. Power supply:AC(220±10%)V,50Hz
2. Flash point determination:Range: Ambient to 300ºC

Repeatability: ≤3ºC

Reproducibility:≤6ºC

 Accuracy:0.1ºC

3. Heating rate:Procedure A: 

(5~6)ºC/min, Procedure B: (1~1.6)ºC/min

Automatic control and manually adjustable.

4. Stirring rate:Procedure A:

(90~120)RPM, Procedure B: (250±10)RPM

Automatic control and manually adjustable.

 5. Igniting mode:Electric ignition. Gas flame diameter:3.2mm~4.8mm
 6. Working condition:Ambient temperature:(10~40)ºC

Relative humidity:≤80%

 7. Maximum power consumption:500W
 8. Dimension: 520mm×360mm×310mm
ASTM D93 Pmcc Automatical Cutback Asphalt Closed Cup Flash Point Tester

ASTM D93 Pmcc Automatical Cutback Asphalt Closed Cup Flash Point Tester


 

 

I. Main technical features

 

1. It adopts LCD screen to display. Full English man-machine dialog interface. It can preset the parameters of expected flash point,

sample mark number, atmospheric pressure, test date,etc.It has menu to prompt and input function of guide type.

 

2. It adopts simulation tracking display the function curve of temperature rising and test time.

It has prompt functions of English mis-operation,test date and test time.

 

3. It is equipped with standard RS-323,485 computer port.The lower computer can save 100 groups of historical data. The test 

data can be saved for a long time, ransmitted and modified if the instrument being connected with computer.

 

4. It can correct the influence of atmospheric pressure and calculate the correction automatically.

 

5. Differential detection.Automatically correct the systematic deviation.

 

6. Automatically open the lid,ignite,detect and print test data.The test arm lifting up and down automatically.

 

7. It adopts electric ignition to fire light the gas flame.It will light only need to press the button.

 

8. Humanized design,beautiful and safe. Easy to operate.

 

 

 

astm d93 pensky martens flash point tester Selection List

 

NameClosed Cup Flash PointAutomatic Fast Low
Temperature Closed
Cup Flash Point
ItemGD-261
(2008
standard)		 GD-261-1 GD-261AT GD-261DT GD-5208GD-5208D
Picture      
Application

Suitable to detect above 40°,volatile chemical materials

and finished fuel oil
product

Suitable to detect painting,oil
paint,alcohol,cosmetics and
volatile expensive sample
Temperature
control range		40~300ºC,Rod
type mercurial
thermometer,20
08 standard.		 40-300ºC,Pt100 SensorFlash Point
detecting
range (-30~
50)ºC		Flash Point
detecting
range (0~100)
ºC
AutomaticityManual operation,pressing the
spring knob to ignite		Automatical igniting-one
revolution to ignite at a
time automatically,single
chip temperature
control,temperature
display,LCD

Automatical
uncapping,igniting,detecting,

printing
data,testing arm lifting up and down
automatically

 Manual
uncapping,inniting,automatical
detecting,printing data
automatically
Standard ASTM D93

  

Workshop

 

Chongqing Gold Mechanical&Electrical Equipment Co.,Ltd is a professional manufacturer of Petroleum Products test kits

and electrical testing equipment in China.Our products are sold to most countries in the world and they are highly

popular because our good quality and after-sale service.

At present, there are more than 150 employees, of whom more than 70% are technical personnel with college degree or above.

With strong technical force and strong development, new products have been launched continuously.
ASTM D93 Pmcc Automatical Cutback Asphalt Closed Cup Flash Point Tester
 

Exhibition

 

We have developed sales channels in many countries such as UAE, Saudi Arabia, Iran, Malaysia, Thailand, Pakistan, India, Germany, Belgium, USA, Mexico, Kenya,

Nigeria, South Africa and other countries worldwide. And we have gained strong advantage and high reputation in international market.

After several years' development, our products have become high intelligent and wide coverage. 
And our company has become one of the leading manufacturer of petroleum testing instrument and electrical testing instrument.
ASTM D93 Pmcc Automatical Cutback Asphalt Closed Cup Flash Point Tester
 

Packing

Goods are packed in veneer case, which is firm and safe for oversea shipment.
ASTM D93 Pmcc Automatical Cutback Asphalt Closed Cup Flash Point Tester

Please feel FREE to contact us if you have any needs. And welcome to visit our OFFICIAL WEBSITE at:

 http://chinainstrument.en.made-in-china.com

If you want to know more information...

Please leave a message below and click " SEND "

Thanks for your time and attention!

 

CHONGQING GOLD MECHANICAL&ELECTRICAL EQUIPMENT CO.,LTD.

  
    
         
Website:https://chinainstrument.en.made-in-china.com
              http://chinainstrument.en.made-in-china.com

  

 

You Might Also Like