3d: representing three directions, the general fixture is vertical and horizontal without vertical direction. There are two directions on the platform and four sides can be installed vertically so as to achieve a three-dimensional combination.

 Hole system: The main feature of this fixture is that there is no traditional thread or T-groove in the standard hole from the platform to the accessories. It can make the assembly more convenient and accurate with quick locking pin.

 Combination: Because all accessories are pre-made, can be combined and adjusted according to the needs of the product.

Flexibility: Because the above-mentioned functional equipment can be changed according to product changes, a set of fixtures can complete several products or dozens of product requirements, thus greatly speeding up the product development, trial-production process, saving a lot of manpower, material and financial resources (environmental protection and low-carbon products).

Welding: This product is a general fixture designed for the manufacture of welded products. It is very convenient, flexible and accurate for welding. It is much advanced with traditional welding methods.

 Three dimensional steel platform dimensions:

Long x width * high (mm): 1000X1000 * 200

 Hole size:

 The 28 series platform: hole tolerance is D10 level, and the locking pin which is matched with the platform is H7 level. The center distance between adjacent two holes is 100 + 0.05mm.

 The platform column is divided into three types: height (divided into three types) bearing capacity is 2t, fixed (frame type) bearing capacity is 5t, movable (lifting type bearing capacity is 3t) and braked universal wheel bearing capacity is 1t.



 

 Product name: Supporting parts Supporting angles(600)

Material:HT-300

Series:D28 Supporting parts are mainly applied to connect tables, extend surfaces of tables, support and locate large welding products.

Tools for supporting: U-Shaped case, L-shaped cube case, Angle supporting, and Angle gauge

Product Name: U-shaped shell
Series: D28 Material: HT-300
Dimensions: 500*200*200/1000x200x200/1200*200*200/1500*200*200 can be customized for more sizes
Flatness: 0.10 / thousand mm
Roughness: Ra 1.6
Hole spacing: 100±0.0
Uses: For platform extension or height positioning of higher workpieces.




China 3D welding table system with jigs&fixture

Dimensions:1000X1000mm-2000X4000mm

• Five working surfaces the locating piece can be installed on. Also can be extended via any of its five working surfaces.

• For its material divided into: Steel Welding Tables (Q345) and Casting Welding Tables (HT300).

• For its hole diameter divided into: D28 series and D16 series.

Diagonal Grid: D28 is 100*100mm; D16 is 50*50mm.

Supporting: legs, steel frame and hydraulic lift box, according to the requirement.

Components can be equipped after your selecting:

1, Tools for supporting: U-Shaped cube case, L-shaped cube case, Angle supporting, and Angle gauge

2, spare parts for Locating:

3, Tools for clamping and fixing

4, spare parts for locking working piece

5, Auxiliary Tools