Cartridge Filter Laser Plasma Cutting Air Filter Cartridge Laser Cutting Dust Collector
China Cartridge Filter Laser Plasma Cutting Air Filter Cartridge Laser Cutting Dust Collector, Find details about China Dust Collector, Air Purification System from Cartridge Filter Laser Plasma Cutting Air Filter Cartridge Laser Cutting Dust Collector
Basic Info.
Model NO.
EHI
Air Volume
2000/3000/4000/5000/6000 M3/H
Material
Carbon Steel/SUS304
Filter Cartridge Type
Polyster/Cellulose/Nano-Fiber/Flame Retardant
G.W.
1150kgs
Size
1242mmx1323mmx2364mm
ODM
Acceptable
OEM
Acceptable
Trademark
Erhuan
Transport Package
Plywood Packing
Specification
1x20′GP
Origin
China
Model NO.
EHI
Air Volume
2000/3000/4000/5000/6000 M3/H
Material
Carbon Steel/SUS304
Filter Cartridge Type
Polyster/Cellulose/Nano-Fiber/Flame Retardant
G.W.
1150kgs
Size
1242mmx1323mmx2364mm
ODM
Acceptable
OEM
Acceptable
Trademark
Erhuan
Transport Package
Plywood Packing
Specification
1x20′GP
Origin
China
Product Desciption
Product Description
The special dust remover for laser cutting machine is also a kind of filter cartridge dust remover. It is a directional product developed to solve the problem of a large number of sparks and dust generated by laser cutting machine in the current market. At present, the model has 6 kinds of standard specifications, integrating spark catcher, dust collector, fan, electric control cabinet and ash discharge device, plug and play. Laser cutting machine with its own cutting platform at the bottom of the factory will have a diameter of 200-300mm exhaust outlet. Before leaving the factory, the bottom air inlet of the dust collector will reserve three kinds of standard flange interfaces of 200 mm, 250 mm and 300 mm. The special dust collector for laser cutting produced by our company is an integrated machine. After receiving the goods, it is transported and placed next to the laser cutting machine. With plastic pipes with steel wires or other hard iron pipes, the air outlet at the bottom of the cutting platform can be connected in series with the air inlet at the bottom of the dust collector. When the power supply is connected into the electric control cabinet of the precipitator, the unit can be started up and operated. Detailed operation instruction manual is provided with the machine, which is convenient and fast.
Principle and process of dust removal
1. Press the switch button, the dust collector starts to work, and the induced draft fan starts.
2. The laser cutting dust splashed by sparks enters the air inlet of dust collector under the power of induced draft fan.
3. Through the air inlet, the spark dust first enters into the spark catcher. Its labyrinth structure principle makes the spark automatically extinguish after repeated collisions, and finally falls into the ash hopper.
4. After entering the surface of the filter cartridge, due to the sudden expansion of the cross section of the air flow and the effect of the air distribution plate, the wind speed drops sharply, and a part of the coarse particles in the air flow collide with each other under the action of wind force and inertia force, and naturally settle to the bottom ash hopper; The dust particles with fine particle size and small density are intercepted by depositing on the outer surface of the filter material through the combined effects of diffusion and screening.
5. The clean gas penetrates through the filter material and is discharged from the inner wall of the filter cartridge and enters the clean room.
6. The air in the clean room is extracted by the fan and directly discharged into the workshop without chimney.
7. The resistance of the filter element increases with the increase of the thickness of the dust accumulation layer on the surface of the filter material.
8. Injection control mode can be divided into pressure difference control, time sequence control and manual control. The pointer type differential pressure instrument can monitor the differential pressure of the filter cartridge in real time, which is intuitive and readable. The pulse controller will automatically open and close the valve, open the compressed air injection for soot cleaning.
9. At this time, the pulse power supply is switched on instantaneously, the electromagnetic pulse valve is opened, and the compressed air with a pressure of more than 4kg is introduced into the surrounding air instantaneously as the sufficient air source for the secondary amplification, and then injected into the filter cartridge with high pressure. Under the action of high-pressure pulse airflow, the dust attached on the outer surface of the filter cartridge is swept away and falls into the dust collecting box of the dust hopper at the bottom of the dust collector.
10. After ash cleaning, the electromagnetic pulse valve is closed, the resistance becomes smaller after the dust on the outer surface of the filter material is removed, the filter material is regenerated, and the dust interception function is restored again. When the resistance rises, the automatic circulation of ash cleaning and regeneration work again.
2. The laser cutting dust splashed by sparks enters the air inlet of dust collector under the power of induced draft fan.
3. Through the air inlet, the spark dust first enters into the spark catcher. Its labyrinth structure principle makes the spark automatically extinguish after repeated collisions, and finally falls into the ash hopper.
4. After entering the surface of the filter cartridge, due to the sudden expansion of the cross section of the air flow and the effect of the air distribution plate, the wind speed drops sharply, and a part of the coarse particles in the air flow collide with each other under the action of wind force and inertia force, and naturally settle to the bottom ash hopper; The dust particles with fine particle size and small density are intercepted by depositing on the outer surface of the filter material through the combined effects of diffusion and screening.
5. The clean gas penetrates through the filter material and is discharged from the inner wall of the filter cartridge and enters the clean room.
6. The air in the clean room is extracted by the fan and directly discharged into the workshop without chimney.
7. The resistance of the filter element increases with the increase of the thickness of the dust accumulation layer on the surface of the filter material.
8. Injection control mode can be divided into pressure difference control, time sequence control and manual control. The pointer type differential pressure instrument can monitor the differential pressure of the filter cartridge in real time, which is intuitive and readable. The pulse controller will automatically open and close the valve, open the compressed air injection for soot cleaning.
9. At this time, the pulse power supply is switched on instantaneously, the electromagnetic pulse valve is opened, and the compressed air with a pressure of more than 4kg is introduced into the surrounding air instantaneously as the sufficient air source for the secondary amplification, and then injected into the filter cartridge with high pressure. Under the action of high-pressure pulse airflow, the dust attached on the outer surface of the filter cartridge is swept away and falls into the dust collecting box of the dust hopper at the bottom of the dust collector.
10. After ash cleaning, the electromagnetic pulse valve is closed, the resistance becomes smaller after the dust on the outer surface of the filter material is removed, the filter material is regenerated, and the dust interception function is restored again. When the resistance rises, the automatic circulation of ash cleaning and regeneration work again.
Frequently asked questions
1. I don't know what kind of dust remover is equipped with?
A: there is an air outlet at the bottom of the cutting platform, which is standard when the laser cutting machine leaves the factory. You just need to measure the diameter of the pipe, and then tell us, through calculation, you can know how much air is needed for the dust collector. Dust removal effect is good or bad, generally corresponding to the platform reserved exhaust port to select the dust collector. Cutting machine manufacturers according to their application experience, in the factory before the definition of the standard size of the exhaust pipe. In fact, the maximum ventilation flow of the pipeline with this size has been calibrated when the platform leaves the factory with the permission of the limit pressure resistance of the fan.
2. When cutting, a lot of sparks will be produced, which will cause the filter material of the dust collector to burn or burn directly, causing fire accidents.
A: install spark catcher. There are three types of spark catchers: embedded baffle type, pipe baffle type and pipe swirl type. The principle of the spark catcher is to use the labyrinth structure to let the spark enter into multiple collisions and extinguish.
3. When cutting, dust and smoke are produced, which diffuse in the workshop and do harm to workers' occupational health.
A: the imported high-precision flame-retardant filter material is used as the standard filter cartridge filter element, similar to the filter element of automobile engine.
4. Do you need a chimney?
A: high precision filter material is used to filter 0.5um dust. The dust removal efficiency is more than 99%, which can be directly discharged indoors.
A: there is an air outlet at the bottom of the cutting platform, which is standard when the laser cutting machine leaves the factory. You just need to measure the diameter of the pipe, and then tell us, through calculation, you can know how much air is needed for the dust collector. Dust removal effect is good or bad, generally corresponding to the platform reserved exhaust port to select the dust collector. Cutting machine manufacturers according to their application experience, in the factory before the definition of the standard size of the exhaust pipe. In fact, the maximum ventilation flow of the pipeline with this size has been calibrated when the platform leaves the factory with the permission of the limit pressure resistance of the fan.
2. When cutting, a lot of sparks will be produced, which will cause the filter material of the dust collector to burn or burn directly, causing fire accidents.
A: install spark catcher. There are three types of spark catchers: embedded baffle type, pipe baffle type and pipe swirl type. The principle of the spark catcher is to use the labyrinth structure to let the spark enter into multiple collisions and extinguish.
3. When cutting, dust and smoke are produced, which diffuse in the workshop and do harm to workers' occupational health.
A: the imported high-precision flame-retardant filter material is used as the standard filter cartridge filter element, similar to the filter element of automobile engine.
4. Do you need a chimney?
A: high precision filter material is used to filter 0.5um dust. The dust removal efficiency is more than 99%, which can be directly discharged indoors.
Who are we?
Dust Collector for industrial air cleanining
Erhuan Environmental is a special manufacturer on industrial dust collector, dust collection, dust remover,dust catcher,vacuum cleaner,dust extractor and all kinds of air filter cartirdge,air filter element, pleated filter.
Why choose us?
1. Since 1994,We are the source manufacturer.
2. We have three factories and one is under construction, all of which have their own property rights such as land and factory buildings.
3. Our products are rich in variety, can provide you with one-stop service to meet your various needs.
4. Our modular design and modular installation meet the global shipping container size.
5. We have our own design and R & D team, we can customize products according to your needs to solve your problems.
6. We can authorize you to become the agent of our products, provide technical support, cooperate and grow together.
2. We have three factories and one is under construction, all of which have their own property rights such as land and factory buildings.
3. Our products are rich in variety, can provide you with one-stop service to meet your various needs.
4. Our modular design and modular installation meet the global shipping container size.
5. We have our own design and R & D team, we can customize products according to your needs to solve your problems.
6. We can authorize you to become the agent of our products, provide technical support, cooperate and grow together.
Modular assembled dust collector with large air volume
Small air volume integrated dust collector
Full process display of manufacturing, transportation and installation
How to package and ship products to your country?
How to install it in your country?
1. Most of our dust collector are modular design, block assembly, so we will arrange our installation team to help you overseas, the flight air ticket, accommodation and labor cost should be on customer side.
2. If you have dust collector installation experience, there is no need to spend such cost, just as per our operation & installation manual, if you have any questions, you can ask our team by wechat, facebook or whatsapp, we can do video service.
2. If you have dust collector installation experience, there is no need to spend such cost, just as per our operation & installation manual, if you have any questions, you can ask our team by wechat, facebook or whatsapp, we can do video service.
About our factory information
FAQ
Q:What is the price?A:The price is based on your request technical data, such as the air volume, application, configuration etc, different model has different price, so if you need the price, please send me your detail technical data or photos.
Q:What payment methods your company accept?
A: We accept most of the payment methods,but mainly accept T/T,L/C,Western Union etc.
Q:How long is the warranty time for your products?
A: Our officially promised warranty time is one whole year after delivery at best.
Q:What's the delivery time of your company?
A:Honest speaking, they depends on the quantity and the difficult of your order.As you know , but mostly ,the shipment time is 4 weeks after deposit for 380v/50hz/3phase fan, if special electic, the delivery time is within 6-8 weeks after deosit.
Q:Do you give any discount ?
A:We will surely try my best to help you get those by the best price and good service at the same time.
Q:I would like to ask you if it's possible to have my logo on the dust collector machine?
A:We hope you know that our company Erhuan supports customized logo service. But, we also hope you know that it's an extraservice,so a little bit extra service fee is needed.
Q:Can you design products according to my needs?
A:Of course, we have our own product design team to meet your personal customization needs.
You Might Also Like
10OZ Cotton Polyester Spandex For Jeans
Auto Wiper Motor for Renault Master, 7701050898
Indoor Commercial Trampoline Center for Shopping Mall
Neonpro Series Black White Transparent Straight Type Sleeve ......
Reliable DDP Railway Shipping From Yiwu Shenzhen to EU DDP t......
Ont T24 Plank Support Bench Press, Chest Push Bench Fitness ......
Large Capacity Fashion Stylish Gift Women Ladies Work Shoppi......
New Factory Price High Quality Pin Type Forklift Forks for S......
Natural Birch Wood Double Pointed Sticks
Prefabricated Steel Structure House Project for Logistics Ce......
OEM ODM Customized Home Workout Equipment Resistance Band fo......
Nonwoven Fabric Best Cheap Painter Absorbent Cotton Fleece