Products

Cincinnati Cmt58 Twin Conical Screw and Barrel for Recycled PVC

China Cincinnati Cmt58 Twin Conical Screw and Barrel for Recycled PVC, Find details about China Screw and Cannon, Bimetallic Screw Barrel from Cincinnati Cmt58 Twin Conical Screw and Barrel for Recycled PVC

Model NO.
CMT58
Trademark
OULIN
Transport Package
Plywood Case
Specification
CMT58
Origin
China
HS Code
84779000
Model NO.
CMT58
Trademark
OULIN
Transport Package
Plywood Case
Specification
CMT58
Origin
China
HS Code
84779000
Detail Information For Cincinnati CMT58 Twin Conical Screw and Barrel for Recycled PVC:

Application: for cincinnati extrusion, for recycled PVC, pipe extrusion.

Customer's Requirement: good abrasive resistance.

Screw's quality: bimetallic screw, base material: rolled 38CrMoAlA, 10%-15% tungsten carbide powder will be added at screw's alloy layer.

Barrel's quality: barrel will be made into two parts, a alloy liner will be pushed into the extruder zone to increase the abrasive resistance, the rest part will be the nitrided quality, two parts will be connected by bolts.


Detail Information For All Brand Twin Conical Screw and Barrel:

Application:  
For the production of pipes, profiles, sheets, such as SPC floor, PVC wall board, PVC wood plastic, PE wood plastic, high molecular sheet, baking-free brick plate, high calcium plate, high calcium pipes, high calcium profiles, soft PVC sheet, PVC foam board, PP, PE, ABS, PVC, granulation and etc.

Specification:
24/52, 35/76, 45/90, 45/100, 50/105, 51/105, 55/110, 55/120,58/124, 60/125, 65/120, 65/132, 68/143, 70/135,70/140, 75/150, 80/143, 80/156, 92/188, 105/213,110/220 and others.

1: Factory can produce twin conical screw and barrel according to your drawings.
2: Engineer can be sent to your factory for measurement, company can produce screw and barrel for most extrusion brand.

Quality:
1: Nitriding quality------ base material: 38CrMoAlA(JIS SACM645)
2: Bimetallic quality-----Good abrasive& corrosive resistance.

Heat treatment:
Advance hardening and tempering
Nitriding treatment

Technical Parameters:
Nitriding depth: 0.50mm-0.80mm                                
Nitriding hardness: HRC56-58                          
Surface roughness: Ra 0.4                  
Screw straightness: 0.015mm  
Alloy layer depth: 2mm-3mm
Alloy layer hardness: HRC56-64 

OULIN SCREW:  YOUR LOYAL PARTNER FOR SCREW AND BARREL

Cincinnati Cmt58 Twin Conical Screw and Barrel for Recycled PVCCincinnati Cmt58 Twin Conical Screw and Barrel for Recycled PVCCincinnati Cmt58 Twin Conical Screw and Barrel for Recycled PVC

You Might Also Like