All in One Plastic Surgery Lipo Slimming Machine for Neck / Chin / Arm Fat Removal

China All in One Plastic Surgery Lipo Slimming Machine for Neck / Chin / Arm Fat Removal, Find details about China Surgical Liposuction, PAL Power Asisted Liposuction from All in One Plastic Surgery Lipo Slimming Machine for Neck / Chin / Arm Fat Removal

Model NO.
BS-LIPS5
Origin
China
Model NO.
BS-LIPS5
Origin
China
All In One Plastic Surgery Lipo Slimming Machine For Neck / Chin / Arm Fat Removal
All in One Plastic Surgery Lipo Slimming Machine for Neck / Chin / Arm Fat Removal

What is Liposuction?
It is a unique technique that was initially performed during the year 1974 and provided a wonderful result in the field of surgery. After that it has never looked back and has achieved various milestones. For past few years it has gained more and more popularity across the globe. It is also the safest and painless process that has been preferred by so many people and surgeons across the globe. It can be used to remove the extra fat from the fatty tissue area but in case of previous surgery it is very difficult to remove the fats form the critical areas. Liposuction makes the surgery process simpler.


PAL Surgical Liposuction machine .

Procedure will "sculpture " body by removing additional fat from buttocks, tummy, knees, arms, cheeks as well as neck.. You should remember that the liposuction is not the alternative for diet & exercise, it is main target is helping to remove additional fat from the areas where fat reduction can´t be done very successfully by dieting.

Ideal candidates for surgery are the people with the normal weight, elastic skin as well as areas of the "fat pockets" in body. There are not any age limits however older people has very less elastic skin & may get results, which are worse then younger patients.
Liposuction is done by many techniques: solution injection - where surgeon injects the special solution to fat tissue. Solution consists of the anesthetics to reduce some pain. Adrenalin to reduce bleeding & fluid to help to separate fat from tissue.

The Power Assisted Cosmetic Plastic Surgical Liposuction is a new generation power assisted liposuction system, which integrated high-speed vibrating power assisted liposuction function, aspirator, and infusion function. With the single machine, it is feasible to implement a vibroliposuction surgery, without depending on other devices. It enhances the operation efficiency, and surgeons experience less fatigue during power liposuction with easier penetration and removal of adipose tissue. Microcomputer calculates and provides precise to-and-fro movement.


BS-LIPS5 is a new generation power assisted liposuction system, which integrated high-speed vibrating power assisted liposuction function, aspirator, and infusion function. With the single machine, it is feasible to implement a vibroliposuction surgery, without depending on other devices. It enhances the operation efficiency, and surgeons experience less fatigue during power liposuction with easier penetration and removal of adipose tissue. Microcomputer calculates and provides precise to-and-fro movement.

PAL Liposuction Features

  • One-way oil-free vacuum pump, with excellent and quick pressure boosting, and no countercurrent when engine stopping.
  • With portable cool-air inner-circulation frequency modulation can be easily connected to any common negative-pressure machines and fat-absorbers.
  • Hard parts frosted system is both good at milling bone structures and absorbing its fragments and powders as well as cleaning, which greatly reduces the surgeon's working intensity and saves operation time.
  • Adjustable peristaltic water-injection system can not only be used as swelling anaesthetic injection, but also as the water-resource of hard parts frosted-absorbing system, with simple and convenient operation.
  • No heat generation during operation, no radiation and scald.
  • Handle-made choice to crack emulsified lipocytes, which can effectively protect skin nerves and blood vessels.
  • High resonant frequency and high speed of fat absorbing with high efficiency, as well as convenient operation and labor-saving.
  • Well-distributed fat-absorbing process, flat operation positions, very light pains and quick recovery.

Type

BS-LIPS5
Input Voltage:115/230 Volt at 50-60 Hz
Suction performance :Up to 60 l/min
Maximum vacuum:-0.9 bar /686 mmHG
Flow rate infiltration pump:2 to 22 l/h
Maxium pressure :2.5 bar
Conform cannula stroke :2.0 mm
Conform cannula frequency:3600 strokes/min
Conform cannula motor:Electronic motor,autoclavable

Standard Configuration

l  Vibration handle (electric)

l  Suction needle kit (5 different size cannulas as 1 kit)

l  Manual suction handle

l  Injecting system (including tubing & needle)

l  Storage bottle (2000ml x 2pcs)

l  Pedal switch

l  Power cable

Advantages for the surgeon :

  • Point accurate work /optimal fast suction 
  • Power-saving and gentle treatment 
  • Shorter operating times
  • Optimized time/cost calculation
  • Best possible gentle patient treatment 
  • Handpiece is compatible with all common cannulas

Advantages for the patient:

  • Optimal cosmetic recults
  • Gentle treatment 
  • No thermal stress on the tissue 
  • Fast recovery after the operation

What area can be treated by liposuction? 
All in One Plastic Surgery Lipo Slimming Machine for Neck / Chin / Arm Fat Removal

FAQ

1, What is the Payment Terms?
Re: T/T (Wire Transfer), Western Union, Paypal, Credit card.
2, How do you delivery the machine?
Re: By door to door service, say DHL,UPS,TNT,FEDEX etc., Or by sea.
3, What about the delivery time?
Re: About 3-7 working days.
4, What's package?
Re: Strong and beautiful aluminum alloy case or carton.
5, Do you offer clinical training?
Re: Yes, we will send you the operation video, we provide the online face to face training as well.
6, Do you have any timely technology supports?
Re: Yes, we have a professional technology supporting team for your timely services. You are welcome to contact us by email, telephone, whatsapp, wecha, we will reply you immediately.
7, What's your warranty?
One year warranty: if there any problem happens with your machine, we will repair it free of charge.
8, If the machines broken during the shipment, how to do?
Re: Generally there will be transportation insurance in the shipment, once there is any damage during the transportation, HONKON will help you to solve the claims with the insurance companies to collect your money back in time.
9, Do you take part in the world exhibition every year? 
Re : Yes, we took part in domestic and overseas exhibitions each year, such as hold in Moscow, Japan, India, Indonesia, Germany, Dubai, Italy, Australia, Mexico, Hong Kong etc…

Who We Are?

Lumsail Industrial Inc. (Shanghai) 

We're the leading manufacturer of the liposuction machine in China. Factory direct selling:
1. You will get the latest product, quick delivery (commonly same day after payment).
2. Direct engineering after-sales support.
3. Professional technical guide to maintain and sustaining.
4. OEM/ODM or client customization. We welcome distributor to customize their machines for certain market. 
We sincerely welcome your coming to our factary and office. Come to Shanghai China!
 

How To Contact Us?
Ray Liu
Lumsail Industrial Inc. (Shanghai Factory)
Sincery International Limited
/Mobile+86-131 6626 5161
Tel : +86-21-51180130 +86-21-62528275 Fax : +86-21-51180196
Address: 4/F, NO. 9 YI, Lane 2, Suide Road Zhengru Science Park, Putuo District, Shanghai