Aluminum Wire Armored Cables Single Core (AWA)

China Aluminum Wire Armored Cables Single Core (AWA), Find details about China Power Cable, XLPE Cable from Aluminum Wire Armored Cables Single Core (AWA)

Model NO.
ARMORED CABLES
Wire Core Material
Red Copper Wire
Certification
ISO, CCC, SGS
Model
N2sxy, N2xs2y, N2xsey, Na2xsy and Na2xs2y.
Brand
Hongda
Inner Semi-Conductive Layer
Semi-Conductive Material
Insulation
XLPE (Cross-Linked Polyethylene)
Outer Semi-Conductive Layer
Semi-Conductive Material
Screen
Copper Wires
Sheath
PVC (Polyvinyl Chloride)
Trademark
Hongda
Transport Package
500m Per Drum
Specification
1.5 - 630 sq. mm
Origin
China
HS Code
8544492100
Model NO.
ARMORED CABLES
Wire Core Material
Red Copper Wire
Certification
ISO, CCC, SGS
Model
N2sxy, N2xs2y, N2xsey, Na2xsy and Na2xs2y.
Brand
Hongda
Inner Semi-Conductive Layer
Semi-Conductive Material
Insulation
XLPE (Cross-Linked Polyethylene)
Outer Semi-Conductive Layer
Semi-Conductive Material
Screen
Copper Wires
Sheath
PVC (Polyvinyl Chloride)
Trademark
Hongda
Transport Package
500m Per Drum
Specification
1.5 - 630 sq. mm
Origin
China
HS Code
8544492100

ALUMINUM WIRE ARMORED CABLES SINGLE CORE (AWA)

Low Voltage and Medium Voltage

Application

  • For installation in duct or conduit, direct earth burial, and indoor installation in cable tray

Aluminum Wire Armored Cables Single Core (AWA)

1. XLPE Insulated, PVC Bedded, Aluminium Wire Armoured, PVC Sheathed Cable, 0.6/1kV, IEC60502
Cu/XLPE/PVC/AWA/PVC


Construction

ConductorPlain annealed copper, Class 2 Stranded Circular, or Compacted
InsulationCross-linked Polyethylene (XLPE) Compound
Insulation ColourNatural
BeddingPolyvinyl Chloride (PVC) Compound Type ST2
Bedding ColourBlack
ArmourAluminium Wire Armoured (AWA)
Outer SheathPolyvinyl Chloride (PVC) Compound Type ST2
Outer Sheath ColourBlack

Electrical Characteristics

Operating Voltage, Uo/U0.6/1kV
Operating Temperature-15°C to 90°C
Final Short Circuit Temperature250°C
Test Voltage3.5kV for 5 minutes

Installation Reference

Min. Bending Radius (mm)8 x cable overall diameter
Max. Pulling Tension (N/mm2)50

Reference Standards

Design SpecificationIEC60502-1
ConductorIEC60228, BS EN60228
Flame RetardancyIEC60332-1, BS EN60332-1


2. Single Core XLPE Insulated Power Cable ( MEDIUM VOLTAGE )

Application

This cable is used for urban networks. It can be installed aerially, in conduit, on open trays and in underground ducts.

Construction Details

 ArmouredNon- Armoured
ConductorCompact round stranded copper or alumniniumCompact round stranded copper or alumninium
Conductor ShieldSemi-conducting tape and/or semi-conducting cross-linked polyethyleneSemi-conducting tape and/or semi-conducting cross-linked polyethylene
InsulationCross-linked polyethyleneCross-linked polyethylene
Insulation ShieldSemi-conducting cross-linked polyethyleneSemi-conducting cross-linked polyethylene
ShieldCopper tape shieldCopper tape shield
FillerPolypropylene (Nonhygroscopic material)Polypropylene (Nonhygroscopic material)
Binding TapePolyester and/or non-woven tape (Optional: water blocking tape)Polyester and/or non-woven tape (Optional: water blocking tape)
BeddingBlack polyethylene (Optional: polyvinyl chloride)NA
ArmourAluminium WireNA
SheathBlack Polyvinylene (ST7) (Optional: Polyvinyl Chloride)Black Polyvinylene (ST7) (Optional: Polyvinyl Chloride)
SpecificationIEC60502-2IEC60502-2
 
Rated Voltage3.6/6 kV6.6 kV,6/10kV11kV,8.7/15kV22kV,12/20kV18/30 kV
Maximum System Voltage7.2 kV12 kV17.5 kV24 kV36 kV
Size Range25 to 1000 mm225 to 1000 mm225 to 1000 mm235 to 1000 mm250 to 1000 mm2
 
10kV single core35mm2 to 500mm2
10kV 3-core35mm2 to 240mm2
11kV single core50mm2 to 1000mm2
11kV 3-core35mm2 to 400mm2
20kV single core50mm2 to 500mm2
30kV single core 50mm2 to 500mm2
33kV single core70mm2 to 1000mm2

Please see our MV cable datasheets for further information.
Aluminum Wire Armored Cables Single Core (AWA)
 

3. EUROPEAN MV CABLE TYPE DESIGNATION

NMV cable according to DIN VDE 0276
AAluminium (Al) conductor
[blank]Copper (Cu) conductor
2XCross-linked polyethylene (XLPE) insulation
SScreen of copper wires and copper tape, helically wound
SEScreen of copper wires and copper tape over each individual core, helically wound
YPolyvinyl Chloride (PVC) sheath
2YPolyethylene (PE) sheath
(F)2YLongitudinal water tightness with PE sheath
(FL)2YLongitudinal and transversal water tightness with Al/PE sheath


As a specialist MV cable supplier, our standard medium voltage cable portfolio contains cable with single and 3-core copper or aluminium conductors, with a steel wire armour or aluminium wire armour for mechanical protection, and with various application-specific materials including Polyvinyl Chloride (PVC), Polyethylene (PE), Cross-linked Polyethylene (XLPE) and Ethylene Propylene Rubber (EPR) and oversheathing properties including Low Smoke Zero Halogen (LSZH). We also supply medium voltage standard cables manufactured against specific power network requirements supplied in triplex formation. Our MV cable products are installed across a number of industries ranging from construction to power transmission. They are widely used for power distribution between high voltage mains power supply and low voltage applications, as well as by utility companies to connect residential and industrial complexes, or renewable energy sources such as wind and solar farms, to the primary grid.

Our MV cables are available in specific lengths as well as in extended long lengths to facilitate installation and to reduce the number of joints.

4. CUSTOM DESIGNED LOW & MEDIUM VOLTAGE CABLES

In addition to standard medium voltage cables, we can design and supply bespoke MV cable products developed for your specific applications. Our custom designed cable solutions provide for variants developed and manufactured around a number of parameters, including:
 

Cross-sectional area:generally 35mm2 up to 1000mm2
Number of cores:generally one or three
Solid or stranded aluminium conductors:for applications requiring a lighter cable weight, also often more economical due to lower aluminium prices.
Stranded copper conductors:for applications requiring a smaller overall diameter and higher transmitting properties.
BeddingBonded or strippable out semi-conducting layer
Water tightness:longitudinal, longitudinal + quasi-radial, longitudinal + radial
Insulation layers(conductor screen, insulation and insulation screen): XLPE, which is more commonly used for MV cables, or EPR which is more flexible and often better suited to marine and offshore applications.
Metallic screen:to nullify the electric field outside the MV cable. Concentric copper wire screens, Aluminium foil laminate, or extruded lead alloy sheath.
Twisted three-core cable or triplex 
Armouring:for mechanical protection. Aluminium wire armoured for single-core cables, Galvanised steel wire armour, strip or tape.
Tapes:Separator tapes to facilitate peeling, water-swellable tapes to prevent water ingress, Conductive tape for core binding.
Outer Sheath:compounds with various properties, tailored to the specific application's requirements, including resistance to oils, greases, rodents, termites, UV and flame, as well as zero halogen emissions.

5. Related Products:
NA2XS(FL)2Y Aluminium Conductor XLPE PE- 18/30 (36)kV Cable
NA2XS(FL)2Y Aluminium Conductor XLPE PE-12/20 (24)kV Cable
NA2XS(FL)2Y Aluminium conductor XLPE PE-6/10 (12)kV Cable
NA2XS(F)2Y Aluminium Conductor XLPE PE - 18/30k (36)kV Cable
NA2XS(F)2Y Aluminium Conductor XLPE PE - 12/20 (24)kV Cable
NA2XS(F)2Y Aluminium Conductor XLPE PE - 6/10 (12)kV Cable
NA2XS2Y Aluminium Conductor XLPE PE - 18/30k (36)kV Cable
NA2XS2Y Aluminium Conductor XLPE PE - 12/20 (24)kV Cable
NA2XS2Y Aluminium Conductor XLPE PE - 6/10 (12)kV Cable
N2XS(FL)2Y - 12/20 (24)kV Cable
N2XS(FL)2Y - 6/10 (12)kV Cable
N2XS(F)2Y - 18/30 (36)kV Cable
N2XS(F)2Y XLPE PE - 12/20 (24)kV Cable
N2XS(F)2Y XLPE PE - 6/10 (12)kV Cable
N2XS2Y XLPE PE - 18/30 (36)kV Cable
N2XS2Y XLPE PE - 12/20 (24)kV Cable
N2XS2Y XLPE PE - 6/10 (12)kV Cable
NA2XSY Aluminium Conductor XLPE PVC - 18/30 (36)kV Cable
NA2XSY Aluminium Conductor XLPE PVC - 12/20 (24)kV Cable
NA2XSY Aluminium Conductor XLPE PVC - 6/10 (12)kV Cable
N2XSEY XLPE PVC - 6/10 (12)kV Cable
N2XSY XLPE PVC - 18/30 (36)kV Cable
N2XSY XLPE PVC - 12/20 (24)kV Cable
N2XSY XLPE PVC - 6/10 (12)kV Cable
BS 6622 XLPE MDPE 6.35/11 (12)kV Cable
BS 6622 XLPE PVC 6.35/11 (12)kV Cable
BS 7835 XLPE LSZH 6.35/11 (12)kV
BS 7835 XLPE LSZH 19/33 (36)kV
BS 6622 XLPE PVC 19/33 (36)kV

6. Packing & Shipping:

Aluminum Wire Armored Cables Single Core (AWA)

Aluminum Wire Armored Cables Single Core (AWA)


7. Why Choose Us ?
1. We have a large production base, and advanced production equipment 
2. Have an competitive price and high quality
3. Excellent after-sale service
4. Free issue:packaging list,invoice
5. Powerful technology team
6. Strict quality assurance system and perfect testing means
7. Advanced process equipment
8. Delivery on time
9. Our cable sales to Middle East,Africa,Russia,Southeast Asia, etc.
10.We have a good reputation in the overseas.
Aluminum Wire Armored Cables Single Core (AWA)

8. FAQ
Q: Are you trading company or manufacturer ?
A: We are factory.

Q: How long is your delivery time?
A: Generally it is 5-10 days if the goods are in stock. or it is 10-20 days if the goods are not in stock,
it is according to quantity.

Q: Do you provide samples ? is it free or extra ?
A: Yes, we could offer the sample for free charge but do not pay the cost of freight.

Q: What is your terms of payment ?
A: 30% T/T in advance,70% T/T balance before shipment

Contact information:
Any needs or question ,please contact us ,we will be more pleasure to service you.
We are looking forward to your inquiry and nice cooperaton.
For more information, don't hesitate to call us on +86-15838290725 

Aluminum Wire Armored Cables Single Core (AWA)