China ABS Plastic Car Front Rear Bumper Spoiler Making Blowing Blow Molding Moulding Machine, Find details about China Spoiler Blow Molding Machine, Bumper Blow Molding Machine from ABS Plastic Car Front Rear Bumper Spoiler Making Blowing Blow Molding Moulding Machine
Item | Code item | Parameter | Note |
Extruder (Main extruder ) | Max capacity | 160L | |
Main screw | Ø100mm | High efficiency mixing | |
Screw L/D | 25-30 | ||
Screw material | 38CrMoALA | ||
Max.Extruder consumption | 180-250KG/hr | ||
Twisting transition method | Electrical machinery,Gear box,AC motor | Hard gear surface decelerator with AC regulator | |
Driving motor | 55KW | ||
Screw rotate speed | 5-60r/min | ||
Ahead/back adjusting | Yes | ||
Up/ down adjusting | Yes | ||
Temperature control zone | 5 | ||
Heating power | 22kw | ||
Cooling for blower | 5 | ||
Cooling function | Yes | Cooling water | |
Clamping unit (Mold openiing/closing unit) | Structure | With three bar timing clamping structure in high speed and high force,to achieve quality products | |
Clamping directions | Linear guide | For high precise location for longer service life | |
Platen dimension | 1100*1100mm | (W*H) | |
Max.mold dimension | 900*1400mm | (W*H) | |
Platen distance | 600-1400mm | Min.-Max. | |
Clamping force | 360-560KN | ||
Mold thickness stroke | 610-750mm | ||
Fixing pattern of mold | Mold press platen | ||
Mold open/close stroke control | Inducing Switch +moving | Discriminate mold opening/closing end,mold opening/closing slow speed | |
Light Electric Safety protect | Taiwan | ||
Die head | Form | Accumulator | First in ,First out |
Material | 38CrMoALA,inner mirror treatment | ||
Accumulator volume | 18L | ||
Output of injecting | 13kg | HDPE,5502 | |
Max die-pin diameter | 450-510mm | ||
Heating Method | Stainless steel heating ring,precision +1% | ||
Temperature control zone | 5 | ||
Blow-air | Yes | ||
Adjusting of parison thickness | Yes | MOOG 100 point | |
Adjusting method of thickness | Inner mold adjusting+5mm |