Vacuum Brazed Diamond Wire Saw for Marble Stone Quarry Cutting
China Vacuum Brazed Diamond Wire Saw for Marble Stone Quarry Cutting, Find details about China Diamond Wire Stone, Granite Diamond Wire from Vacuum Brazed Diamond Wire Saw for Marble Stone Quarry Cutting
The static cutting of diamond wire cutting is also called non-prejudice demolish which is newly developed in recent years. The new static demolish is an environmental, high-efficient, safe cutting technique which is a specially designed for cutting and separating large steel reinforced concrete or stone block at quarry. By the high-speed drive from oil hydraulic motor, the diamond wire saw with certain amount diamond beads on it surround cut the object. Under certain tension, the wire saw grind and cut the objects, and the chipping and heat is took away with cooling water, the concrete and stone block are separated into several parts in this way finally.
Quarry wire saw
1. safe and eco-friendly.
2. For granite quarry, we recommend rubber wire, it can protect the wire rope and increase the wire's strength.
3. Spring and rubber diamond wire saw is widely used for marble quarry.
| Diameter (mm) | Connection | Beads/meter | Wire Speed(m/s) |
| φ11 | rubber | 40 | 20~30 |
| φ11.5 | rubber | 40 | 20~30 |
| φ11 | spring | 28/30/32 | 25~35 |
| rubber | 40 | ||
| φ12 | spring | 32 | 25~35 |
Squaring,Profile Wire Saw
1.The use of diamond wire for stone profiling, with narrow kerf width and high quality cable insure less breakage and good tension, bring better performance in tough environment.
2.This product works in low noise, safe and eco-friendly.
| Diameter (mm) | Connection | Beads/Meter | Wire Speed(m/s) |
| φ10 | Plastic | 37 | 20~30 |
| Rubber | 40 | ||
| φ10.5 | Plastic | 37 | 20~30 |
| Rubber | 40 | ||
| φ11 | Plastic | 37 | 20~30 |
| Rubber | 40 | ||
| φ8.8 | Plastic | 32 | 25~35 |
| φ8.2 | |||
| φ7.2 |
Multi-Wire Saw
Suitable for cutting the different kinds of large granite or sandstone.
Advantage: high cutting efficiency, get the even and smooth slab, low power consumption and less materials waste.
| Diameter (mm) | Connection | Beads/Meter | Wire Speed(m/s) |
| φ7.2 | Plastic | 37 | 20~25 |
| φ8.2 |
Concrete Wire Saw
1. Widely used for demolition of house, bridge, big post, cement pipes and under water buildings.
2. Advantage: cutting direction can be controlled, low vibration, low noise, no dust, control cutting at a far distance.
| Diameter (mm) | Connection | Beads/meter | Wire Speed(m/s) |
| φ10.2 | Rubber+ Spring | 40 | 20~25 |
| φ10.5 | |||
| φ11 | |||
| φ11.5 |
The feature of ChinShine diamond wire cutting rope:
1. Since the diamond grits are took as the grinding material, any hard material can be cut and separated;
2. The diamond wire saw moves and works by the power of hydraulic motor, the steady and smoothly running hydraulic pump remotely control the hydraulic motor by high-pressure pipeline, therefore, the vibration and noise can be minimized farthest, and the concrete can be statically cut and separated in stationary state;
3. By using diamond wire saw, you can cut stone or concrete without a shape and size limit, the wire saw can cut the them from any direction like diagonal, vertical and horizontal;
4. By feeding cooling water, the run up wire saw can be cooled down during cutting, and the chips will be took away by the water which can be recycle-used;
5. The fast cutting speed and large power is the greatest advantage of diamond wire cutting marble which is incomparable. 
Why buy diamond wire saw cutting and diamond wire cutting rope for sale from ChinShine?
* ChinShine diamond wire for marble cutting have been market tested for over 12 countries.
* Compared with most suppliers, we could ensure that our cutting efficiency is increased at least 20%
* 24 hours response.
* Professional technical support and solution.
* Direct communication with engineers.
* Best after-sale service. 
I bought different blades and segments from "XX" and you, the 350mm blades bought from xxx(other supplier) falling off segments, however the segments we bought from you for our 3000mm blade are very good and we are happy with them, I will be putting in an order for more segments in two weeks time, I will definitely buy your blades, thank you for providing such good segments for us.
--Maci** from Poland
"Congratulations, after the evaluation of all the saw blade supplier, we are very happy with your quality. You will become our important supplier. Now, we ask you to specify the lead time of production for orders of 400 blades, send me the total price, invoice please."
--Lore** from Italy
"Mikayla and company, you have always been true and honorable to your word. It has been a pleasure dealing with you in this past year.
I look forward to many more years to come."
--Mr.Wall Canada
Website: http://diamondsegments.en.made-in-china.com
Website: http://diamondsegments.en.made-in-china.com
You Might Also Like
Wisdom Fiber Metal Laser Cutting Machine Laser Cut Steel Alu......
10~50 Layers and 400~1000 Tons Hydraulic Hot Press for Plywo......
High Quality Kitchen Cabinet Hardware Solid Brass Handle
Gl--1000j Customer Favored Scotch Tape Making Machine Produc......
Deliang Plastic Fender Flares Pocket for Volkswagen Amarok
4 Prong Adapters for Lower Limbs
NEMA 16 1.8 (39SHD0502-45N) Captive Linear Actoator Hybrid S......
Rubber Sheet Two Roller Three Roller Four Roller Calender Ma......
Motorcycle Part Motorcycle Oil Tank Fuel Tank
Custom Loose Cotton Basic Best Cute Gym Tank Tops for Women
12 Tyres Side Panel Tipper Semitrailer Side Tipper Dump 2/3 ......
Infrared Energy Saving Band Heater