Products

Filtration Control Agent Sharkpac L Low Viscous Polyanionic Cellulose

China Filtration Control Agent Sharkpac L Low Viscous Polyanionic Cellulose, Find details about China Filtration Control Agent, Drilling Fluids from Filtration Control Agent Sharkpac L Low Viscous Polyanionic Cellulose

Model NO.
DFS07-001
Model NO.
DFS07-001

Product Description

SHARKPAC® L filtration control additive is high-quality Polyanionic Cellulose Polymers. It is used in most water-based drilling fluids including fresh water, seawater and brine up to 300°F(149°C). SHARKPAC® L has a minimal increase in rheology, is non-toxic and does not require a biocide. SHARKPAC® L is can also encapsulate solids to control dispersion of active shale.

Applications/Functions

  • Control filtration rates with minimal increase in rheology  
  • Aids in the formation of a tough, thin filter cake to minimize the potential for differential sticking

Advantages

  • Temperatures stable up to 300°F (149°C)
  • No fermenting, no biocide needed
  • Effective in fresh water, seawater and brine fluids
  • Functions in all pH range
  • Produces thin, slick, tough filter cake
  • Inhibit hydratable, swelling shales
  • Environmentally compatible

Typical Properties

  • Appearance: Cream-colored, free-flowing powder
  • Specific gravity: 1.5-1.8
  • pH (1% aqueous solution): 7.75

Recommended Treatment

  • A typical treatment range is 0.5-3 ppb (1.4-8.6 kg/m3).

Package

  • 25 KG SACK
Filtration Control Agent Sharkpac L Low Viscous Polyanionic CelluloseFiltration Control Agent Sharkpac L Low Viscous Polyanionic CelluloseFiltration Control Agent Sharkpac L Low Viscous Polyanionic CelluloseFiltration Control Agent Sharkpac L Low Viscous Polyanionic Cellulose
 
Product CodeSHARKProduct DescriptionApplications/Functions
DFS07-001SHARKPAC® LLow Viscous Polyanionic Cellulose Filtration Control Agent for water based mud with minimal viscosity increase up to 300°F
DFS07-002SHARKPAC® RHigh Viscous Polyanionic Cellulose Filtration Control and viscosifier agent for water based mud up to 300°F
DFS07-003SHARKCMC® LLow-viscosity, technical grade sodium carboxymethyl cellulose for filtration control Filtration Control Agent for water based mud up to 250°F with minimal viscosity increase, salinity tolarant to 50,000ppm 
DFS07-004SHARKCMC® HHigh-viscosity, technical grade sodium carboxymethyl cellulose for filtration control and supplemental viscosity Filtration Control and viscosifier agent for water based mud up to 250°F, salinity tolarant to 50,000ppm 
DFS07-005SHARKSTAR®Pregelatinized modified starch Filtration Control Agent for water based mud up to 250°F with minimal viscosity increase
DFS07-006SHARKSTAR® HTModified polysaccharide/ tapioca starch Filtration Control Agent for water based mud up to 325°F with minimal viscosity increase
DFS07-007SHARKSTAR® NHydroxypropyl carboxymethyl starch/Cross-linked starchReduce filtration in reservoir sections up to 300°F
DFS07-008COPOTROL®Sodium polyacrylate copolymer High-temp fluid loss and rhelogy stabilizer for low calcium, low solids or non-dispersed muds up to 400°F
DFS07-009WHITEMP®AAM-AMPS copolymer HPHT filtration control for WBM up to 400°F, white free-flowing powder 
DFS07-010WHITETROL® XAM - AMPS copolymer HPHT filtration control for WBM up to 500°F, white free-flowing powder
DFS07-011BLACKLEO®Highly-oxidized leonarditeHigh-temp WBM fluid loss, thinner, emulsifier for oil in water emulsions up to 400°F
DFS07-012BLACKFLO®Sulfonated LigniteHighly sulfonated lignite polymer for HT WBM fluid loss, thinner, soluble in high brines,combination with BLACKTEMP for best performance up to 400°F
DFS07-013BLACKTEMP®Sulfonated methypheuo formald-ehyde for freshwater and brine fluids High-temp fluid loss control with minimal rheology increase used for freshwater and brine fluids up to 450°F. Salinity tolerant to 120,000ppm and calcium resistant to 2000ppm, dark brown powder
DFS07-014BLACKTEMP® PLUSSulfonated methypheuo formald-ehyde for saturated brine High-temp fluid loss control with minimal rheology increase used for saturated brine and formate brine up to 400°F. Salinity tolerant to 120,000ppm and Ca ion resistant to 2000ppm, dark brown powder
DFS07-015BLACKNEX®Resinated LigniteHigh-temp fluid loss control and rheology stabilizer for all WBM up to 425°F with chlorides below 70,000ppm and hardness not exceeding 3,000ppm
DFS07-016BLACKLIGO 400®Organophilic leonarditeHPHT filtration control for OBM up to 400°F, alternative to asphalt and gilsonite products 
DFS07-017BLACKLIGO® 500Organophilic leonarditeHPHT filtration control for OBM up to 500°F, alternative to asphalt and gilsonite products
DFS07-018BLACKTROL® 350Gilosnite - Soften point 350°FHPHT filtration control for OBM, soften point >350°F 
DFS07-019BLACKTROL® 400Gilsonite -Soften point 365-420°FHPHT filtration control for OBM, Soften point: 365-420°F
DFS07-020BLACKTROL® HPEmulsified gilsonite - Soften point 250-420°FHPHT filtration control for WBM, excellent dispersion, Soften point: 250-420°F
DFS07-021BLACKSULA®Sulfonated Asphalt - EconomicalHPHT filtration control for both WBM and OBM up to 350°F, shale stabilizer. Prevent shale hydration and sloughing as well as decrease cuttings erosion
DFS07-022BLACKSULA® PLUSSulfonated Asphalt - PremiumShale stabilizer, cuttings dispersion inhibitor and contributes to high temperature fluid loss control in both WBM &OBM up to 500°F. Partially soluble in water and oil, star product for 35 years. 
DFS07-023LIQUITROL®Liquid polymer for OBMLiquid filtration reducer in NAF up to 350°F. Reduce the requirement of organoclay
DFS07-024PURETROL®Cross-linked polymer for OBMPrimary filtration control agent for HPOBM up to 300°F, alternative to amine lignite and gilsonite,white powder
DFS07-025PURETROL® HTCross-linked polymer/Vinyl toluene-acrylate copolymerPrimary filtration control agent for HPOBM up to 500°F, alternative to amine lignite and gilsonite,white powder
DFS07-026NMSHIELDTMNANO-Technology particlesVersatile product to provide HT filtration control, improved fluids lubricity, strengthen wellbore and increase fracture breakdown pressure in sandstones and shales for both WBM and OBM up to 450°F. D50 is only 5nm.
DFS07-027LIQUITROL® HTLiquid polymer for OBMLiquid filtration reducer in NAF up to 400°F. Reduce the requirement of organoclay.

You Might Also Like