Fluids Engineering Training Equipment Minrry Mechanical Training Educational Equipment
China Fluids Engineering Training Equipment Minrry Mechanical Training Educational Equipment, Find details about China Fluids Engineering Experiment Equipment, Fluids Engineering Training Equipment from Fluids Engineering Training Equipment Minrry Mechanical Training Educational Equipment
Basic Info.
Model NO.
MR-ET 101
Input Power
AC220V
OEM Service
Yes
Buyer Label
Yes
Trademark
MINRRY
Transport Package
Plywood Box
Specification
Aluminum structure
Origin
China
Model NO.
MR-ET 101
Input Power
AC220V
OEM Service
Yes
Buyer Label
Yes
Trademark
MINRRY
Transport Package
Plywood Box
Specification
Aluminum structure
Origin
China
Product Desciption
MR-ET 101 Fluids Engineering Training Equipment Minrry Mechanical Training Educational Equipment
1. Description
The purpose of a refrigeration system is the cooling of materials and products, e.g. to protect food from spoiling. Cooling can be described as a process in which heat is removed from the environment.
A commonly used refrigeration system is the so-called compression refrigeration system. In this system refrigerant flows through four main elements: compressor, condenser, expansion element and evaporator. The refrigeration system uses the fact that the refrigerant has a low boiling point at low pressure. This means that evaporation takes place on the low pressure side. During the evaporation of the refrigerant heat is removed from the environment and it is cooled. The condensation takes place on the high pressure side after the evaporator. Here the heat is discharged into the environment. If not the cooling effect but the discharged heat is used, this is called a heat pump.
The setup of MR-ET 101 represents a simple compression refrigeration system. Evaporator and condenser have been designed as a pipe coil with each end immersed in a water-filled tank. The water simulates the environment. A thermostatic expansion valve serves as expansion element. Two manometers indicate the two system pressures on the high and low pressure sides. On an additional scale on the manometer the evaporation temperature of the refrigerant is indicated. Two thermometers measure the temperature of the water in the tanks.
This allows for calculations of the amount of heat removed from the environment (evaporator, cold water) and added to the environment (condenser, hot water). A sight glass indicates the aggregate state of the refrigerant upstream of the expansion valve.
2. Technical details
Specification
fundamentals of refrigeration in a simplified model
typical compression refrigeration system with piston compressor, thermostatic expansion valve, evaporator and condenser (each in the shape of a pipe coil)
2 manometers with temperature scale for the refrigerant show the values of the refrigerant on the high and low pressure sides
2 water-filled tanks with thermometer to demonstrate the cooling and heating effect
pressure switch to protect the compressor
sight glass to monitor the aggregate state of the refrigerant
refrigerant R513A, GWP: 631
Technical data
Compressor
power consumption: 104W at 5/40°C
refrigeration capacity: 278W at 5/40°C
displaced volume: 2,72cm3
Tank: 4x 1700mL
Refrigerant
R513A
GWP: 631
filling volume: 500g
CO2-equivalent: 0,3t
Measuring ranges
pressure: -1…12,5bar, -1…25bar
temperature: -50…40°C, -40…80°C, 2x -10…50°C
230V, 50Hz, 1 phase
230V, 60Hz, 1 phase
120V, 60Hz, 1 phase
UL/CSA optional
Service
We supply supply7*24 hours service, customer design service, OEM service, buyer label service. With professional engineers team and sales team, we assure you good product quality.
Certificate
Our products takes ISO9001 product management system.
We also have below equipment, please click the link to see it
1. Description
The purpose of a refrigeration system is the cooling of materials and products, e.g. to protect food from spoiling. Cooling can be described as a process in which heat is removed from the environment.
A commonly used refrigeration system is the so-called compression refrigeration system. In this system refrigerant flows through four main elements: compressor, condenser, expansion element and evaporator. The refrigeration system uses the fact that the refrigerant has a low boiling point at low pressure. This means that evaporation takes place on the low pressure side. During the evaporation of the refrigerant heat is removed from the environment and it is cooled. The condensation takes place on the high pressure side after the evaporator. Here the heat is discharged into the environment. If not the cooling effect but the discharged heat is used, this is called a heat pump.
The setup of MR-ET 101 represents a simple compression refrigeration system. Evaporator and condenser have been designed as a pipe coil with each end immersed in a water-filled tank. The water simulates the environment. A thermostatic expansion valve serves as expansion element. Two manometers indicate the two system pressures on the high and low pressure sides. On an additional scale on the manometer the evaporation temperature of the refrigerant is indicated. Two thermometers measure the temperature of the water in the tanks.
This allows for calculations of the amount of heat removed from the environment (evaporator, cold water) and added to the environment (condenser, hot water). A sight glass indicates the aggregate state of the refrigerant upstream of the expansion valve.
2. Technical details
Specification
fundamentals of refrigeration in a simplified model
typical compression refrigeration system with piston compressor, thermostatic expansion valve, evaporator and condenser (each in the shape of a pipe coil)
2 manometers with temperature scale for the refrigerant show the values of the refrigerant on the high and low pressure sides
2 water-filled tanks with thermometer to demonstrate the cooling and heating effect
pressure switch to protect the compressor
sight glass to monitor the aggregate state of the refrigerant
refrigerant R513A, GWP: 631
Technical data
Compressor
power consumption: 104W at 5/40°C
refrigeration capacity: 278W at 5/40°C
displaced volume: 2,72cm3
Tank: 4x 1700mL
Refrigerant
R513A
GWP: 631
filling volume: 500g
CO2-equivalent: 0,3t
Measuring ranges
pressure: -1…12,5bar, -1…25bar
temperature: -50…40°C, -40…80°C, 2x -10…50°C
230V, 50Hz, 1 phase
230V, 60Hz, 1 phase
120V, 60Hz, 1 phase
UL/CSA optional
Service
We supply supply7*24 hours service, customer design service, OEM service, buyer label service. With professional engineers team and sales team, we assure you good product quality.
Certificate
Our products takes ISO9001 product management system.
| No. | Feature Name | Details |
| 1 | Customer design | Yes |
| 2 | Warranty | 1 year, 2 years, 3 years or 5 years according to client requirements |
| 3 | Package | Plastic film+ carton+ Fine plywood |
| 4 | Products standard | International didactic equipment standard |
| 5 | Application range | Educational equipment for university, college, vocational training centers |
| 6 | Company philosophy | Supply best quality Chinese products to the worldwide schools. |
| 7 | Self owned brand | Minrry,MR |
| 8 | Production time | From 10 days to 60 days according to different items |
We also have below equipment, please click the link to see it
You Might Also Like
12.56m3 Road Tanker Cryogenic Storage Tanker
Instant Detergent Grade HPMC for Liquid Detergent Hydroxypro......
Lmusonu New 3012f 18W Square Portable LED Work Light with Or......
Comfort Fly Knitted Breathable Basket Runners Sneakers Whole......
2" Steel Iron Stainless Steel 180 Degree Lift-up Slip off Do......
High Strength Activated Alumina for Petrochemical Catalyst C......
Insulation Tube 2753 Self-Extinguishable Fiberglass Electric......
Flexible Metal Hose / Composite Hose Crimping Machine
18L Pulse Vacuum Steam Sterilizer (TM- XD20DV )
22 Inch LCD Interactive Glass Multi Touch Screen Bar Coffee ......
Customized Small Parts Aluminum Die Casting
24W AC to DC Adapter