Products

High Voltage DC Power Modular 30 Kv 1 Kw

China High Voltage DC Power Modular 30 Kv 1 Kw, Find details about China High Voltage DC Power Supply, High Voltage DC Power Module from High Voltage DC Power Modular 30 Kv 1 Kw

Model NO.
CCP1000 - 220 - P / N - 30
Voltage Regulating Mode
Frequency Modulation Type
Power Supplying System
Terminal Power Distribution Equipment
Energy Transmission
One-way Transmission
Modulation System
PFM
Brand
Idealtek
Output Voltage
30kv
Output Current
33mA
Output Polarity
Positive or Negative
Circuit Mode
AC/DC High Frequency Conversion
Working Mode
Constant Voltage / Constant Current
Output Setting
10-Turn Potentiometer
Protection
Short, Oh, Over Load, Load Discharging
Remote Control
0~10V / 4~20mA Analog Signal Control / RS Ports
Application
High Voltage Capacitor Charging, High Voltage Char
Trademark
iDealTeknic
Transport Package
Plywood Case
Specification
IGBT & HF transformer
Origin
China
HS Code
85044019
Model NO.
CCP1000 - 220 - P / N - 30
Voltage Regulating Mode
Frequency Modulation Type
Power Supplying System
Terminal Power Distribution Equipment
Energy Transmission
One-way Transmission
Modulation System
PFM
Brand
Idealtek
Output Voltage
30kv
Output Current
33mA
Output Polarity
Positive or Negative
Circuit Mode
AC/DC High Frequency Conversion
Working Mode
Constant Voltage / Constant Current
Output Setting
10-Turn Potentiometer
Protection
Short, Oh, Over Load, Load Discharging
Remote Control
0~10V / 4~20mA Analog Signal Control / RS Ports
Application
High Voltage Capacitor Charging, High Voltage Char
Trademark
iDealTeknic
Transport Package
Plywood Case
Specification
IGBT & HF transformer
Origin
China
HS Code
85044019
CCP1000 Series Capacitor Charging High Voltage Power Module
Model: CCP1000-220-P/N-30
Overview
CCP1000 high voltage power supply is specially designed for capacitor charging application, it is featured for high reliability, high-performance and performance to price ratio.
Rated output power: 500W, Maximum output power: 1000W.
Single-output type voltage range: 30KV
Output polarity: positive or negative (on-demand)		High Voltage DC Power Modular 30 Kv 1 Kw
 
Features
  1. Charge and discharge frequency: customizable
  2. Repeatability accuracy: better than 0.5%
  3. Withstand ground potential rise.
  4. Output voltage & current continuously adjustable.
  5. Output voltage adjustable via local potentiometer or remotely.
  6. Output polarity on customers' demand.
  7. Small size, light weight
  8. Stable output, high efficiency (85%)
Specifications
InputTypical valueUnit
Voltage220 (200 ~ 240Vac)Vac
Current< 6 @ 220VacA
Output30KV
Range0-30KV
Power1000W
Current33mA
Features
Line regulation<0.5%
Load regulation<0.5%
Temperature drift<300ppm/ºC (working temperature<55ºC)
Ripple voltage<1% (@100% load) (R.M.S value)
Working temperature-10ºC ~ 55ºC
Storage temperature- 20ºC ~ 80ºC
Size360mm×180mm×136mm
Weight2Kg ~ 6Kg (depends on output voltage)
Power Curve (40KV, 1000W)
High Voltage DC Power Modular 30 Kv 1 Kw
Continuous charging & discharging curve (40KV, 1000W)
High Voltage DC Power Modular 30 Kv 1 Kw
Physical drawing
High Voltage DC Power Modular 30 Kv 1 Kw

 		High Voltage DC Power Modular 30 Kv 1 Kw
 
Input interfacesOutput interfaces
Pin codeDefinitionPin codePin codeDefinition
LLIVE LINE1GNDGND
NNULL LINE2EOCEnd of charging
EGND LINE3VDEMVoltage setting
DB9 Control pin interface (female)4VREFReference
 High Voltage DC Power Modular 30 Kv 1 Kw5VFBKVoltage feedback
6+12VDC+12V voltage
7HV ENABLE / INHIBITHV ON / OFF
8IDEMCurrent setting
The port on power supply main board is female, male port is required for connection to complete the corresponding control functions.9IFBKCurrent feedback
EnclosureAluminum alloy
Control pin description
Pin1: control GND (GND).
Pin2: End of charging detection, The internal circuit is opt-coupler collector open circuit output, when the power supply is under charging state, pin-2 to the ground (pin-1) is under cut-off state; when the capacitor voltage is fully charged, pin-2 to the ground (pin-1) is conducted, which will allow no more than 20mA current flow through. When the voltage on capacitor is below the set charging voltage, pin-2 to the ground (pin-1) is restored to the cut-off state from conducted state.
Pin3: voltage setting, 0-5V corresponding to 0-rated output voltage value.
Pin4: Voltage reference output 5V.
Pin5: voltage feedback, 0-5V corresponding to 0-rated output voltage value.
Pin6: +12V power supply for external use, current not exceeding 200mA.
Pin7: HV enable / inhibit port: add +12Vdc between this pin and pin1, HV ON; 0V or floating, HV OFF.
Pin8: current setting: 0-5V corresponding to 0-rated current value.
Pin9: current feedback: 0-5V corresponding to 0-rated current value.
Note: Current of the product is sampled from primary current control, the current setting signal value should be set greater than 0.7V, otherwise no voltage and current output.
Safety notes
  1. The power supply is high voltage power supply, please operate carefully under instruction of professional persons, or it will cause human safety problem.
  2. Please check below issues before starting power supply.
  1. Power supply should be located in clean and dry condition.
  2. No relative objects besides HV output or HV load.
  3. Make sure that reverse current of load well-grounded via GND terminals on the back panel.

You Might Also Like