40, 000rpm Head for Tealth Internal Irrigation Contra Angle

China 40, 000rpm Head for Tealth Internal Irrigation Contra Angle, Find details about China Dental Handpiece, High Speed Dental Handpiece from 40, 000rpm Head for Tealth Internal Irrigation Contra Angle

Model NO.
1020CH-018A
Application
Adult, Child
Loading Way
Gland Type
Head Diameter
Middle Head
Exhaust Way
Internal Exhaust
Number of Holes
Two Holes
Connection
Without Quick Connector
Rotating Speed
Low-Speed Handpiece
Noise
Less Than 70dB
Max Rotation Speed
40,000rpm
Trademark
TEALTH
Transport Package
Plastic Box
Specification
Aluminum, stainless steel
Origin
China
HS Code
90184100
Model NO.
1020CH-018A
Application
Adult, Child
Loading Way
Gland Type
Head Diameter
Middle Head
Exhaust Way
Internal Exhaust
Number of Holes
Two Holes
Connection
Without Quick Connector
Rotating Speed
Low-Speed Handpiece
Noise
Less Than 70dB
Max Rotation Speed
40,000rpm
Trademark
TEALTH
Transport Package
Plastic Box
Specification
Aluminum, stainless steel
Origin
China
HS Code
90184100
40, 000rpm Head for Tealth Internal Irrigation Contra Angle

TEALTH 40,000rpm FG bur Head for contra angle 
Model: 1020CH-018A

Features:
1.  Japanese Bearings, long service life, more durable
2.  Bur applicable: φ1.60mm, High speed bur
3.  Push button chuck type 
4.  The max rotation speed: 40,000rmp


40, 000rpm Head for Tealth Internal Irrigation Contra Angle
40, 000rpm Head for Tealth Internal Irrigation Contra Angle

Instruction:
After each treatment,Sterilizing handpiece in autoclave according to the following steps:
1.Remove the bur and brush clean handpiece, clean outside of handpiece with an alcohol solution.
2.Lubricate handpiece, each times drop two drops inside of air inlet pipe.
3.Place into autoclaving pouch and mark.
4.Autoclave the handpiece for 12 min. at 135ºC.

Please do not use the acid solution to scrub, inject or soak the handpiece.
Please do not autoclave the handpiece with residual chemical substances.
Handpiece should be packed well and place at clean and dry room without dust, sulfur and salt.
Please do not touch the handpiece immediately after autoclaving.