Valve Control Lora Remote Reading Dry Type Wireless Water Meters 

 

 

 LXSGY-15WLF to LXSGY-50WLF (15mm to 50mm) is a kind of smart wireless water meter with remote reading and valve control function, convenient for the intelligent management of the water supply company, with split design (the electronic parts are sealed separately and the water proof grade can be IP 68), with the multi jet dry type meter as the base meter.


Features:

1. The mechanical part of Lora wireless water meter is multi jet wet type or dry type, with the high accuracy, low starting flow rate, easy reading, long lifetime, etc.
2. Meeting EMC/ESD/EMI, the design requirements of electromagnetic compatibility for the electronic products, reaching the industrial leading level.
3. The wireless module is separated with the mechanical part, for easy maintainance.
4. The electronic parts are separately sealed, and the water proof grade can be IP 68.
5. No wiring, and easy installation.
6. With valve control function.
7. Remote Valve Control: it can remote control the valve if arrears.
8. Shutting-off Valve when attacked: when the wireless water meter is attacked by magnet or electricity, it will close the valve and alarm automatically.
9. Trigger/Button uploading: normally, the valve control Lora wireless water meter is in super low power consumption status. After triggered or pressed the button, the current data and working status could be uploaded by the module.
10. Shutting valve when of low battery: when the battery voltage is less than one certain number, the module can shut off the valve automatically, and upload the data.
11. Shutting valve when out of power: when the wireless water meter is out of power, the valve would be shut off and upload the data with the help of the Farad capacitor.
12. Detecting valve's breakdown: it will automatically judge whether the limit switch is working normally, and even if it is not working, the valve can shut on or off as normal. If the valve is wrong, the wireless water meter will alarm.
13. No wiring, and easy installation.

Parameters of Electronics
Automatic Network Topology of Lora Wireless Water Meter.


Standard Compliance
Technical data conforms to ISO 4064 Class B, Class C, R80, R100, R125 or R160 standard for horizontal installation.

Working Condition:

1. Water temperature:≤50ºC for cold wirelss water meter; ≤90ºC for hot wirelss water meter
2. Humility: 0~95%RH
3. Working Pressure: ≤1.0 Mpa.
4. Pressure Loss: ≤0.063Mpa.
5. Environment Class: B (installed inside).
6. Electromagnetic class: E1 (residential, commercial and ligh indurical).
7. Water Proof Grade: IP 68.

Installation requirements
*The wireless water meter should be installed in horizontal position  with the direction of the flow as indicated by the arrow cast in the meter body with the register face upwards. 
*Pipeline must be flushed before installation.
*The wireless water meter should be constantly full of water during operation.

Maximum Permissible Error
In the lower zone from Qmin(Q1) inclusive up to but excluding Qt (Q2) is ±5%.
In the upper zone from Qt(Q2) inclusive up to and including Qmax(Q4) is ±2%(cold wireless water meter).
In the upper zone from Qt(Q2) inclusive up to and including Qmax (Q4) is ±3% (hot wireless water meter).



Accessories
Each wireless water meter has one set couplings optional: 2pcs tube, 2pcs nut and 2pcs gasket


MAIN TECHNICAL DATA    According to ISO4064 :2003 (Old Standard)
MAIN TECHNICAL DATA    According to ISO4064:2014 (New Standard)
Dimensions and Weight

  



Why Choose "JIANGBEI" Wireless Water Meter?

1. 25 Years' manufacturing experience of different kinds of wireless water meter, with strict management system of ISO 9001, ISO14001 and ISO 45001.

       2. 3 Years' warranty. If you have met any quality problems for our JIANGBEI wireless water meter, please just inform us. A fast and good after-service would be provided to you!

       3.JIANGBEI wireless water meter is exactly made according to ISO 4064/CE/EN 14154 (MID)/OIML R49 standard,  and now we are applying for MID certification.

      4. JIANGBEI has the testing laboratory for wireless water meter, which can test wireless water meter in different temperature,  different pressure, different position, etc.. Now we are applying for SCNAS certification for it.

      5.JIANGBEI has the automatic test bench for wireless water meter in sizes from 50mm to 600mm, which can test wireless water meter by weight, volume and comparison.

      6. You can check the testing or the results of each single wireless water meter on-line by JIANGBEI newly designed unique  automatic test bench.

      7. According to your different project requirements, JIANGBEI will give you the best wireless water meter solution by our professional technical team and long experience in wireless water meter field.

Trust me! You will be satisfied by our perfect wireless water meter and after-sale service, and you will never get complaint from your customers.