MFF Series oil Pleated Filter CartridgePleated Filter cartridges are manufactured to exact standards and are used in the most demanding industrial environments. Manufactured in a range of length options and micron ratings. Media has a fixed pore construction of high quality fibers. The combination of surface and depth filtration provides a long lifetime. Due to use of premium quality filter fabrics, the pleated filter cartridges have superior flow characteristics with very low pressure drop compared to depth media of similar micron rating. Due to large filter area and design, allow the use of a reduced number of cartridges. Your advantage is a smaller filter vessel, less footprint and lower capital investments. The pleated cartridges have a very large filtration area and therefore a very high dirtholding capacity. Long cartridge lifetime means lower operational condumable costs, Less work changing the cartridges and less waste.
Features--Large filter area and depth filtration provides a long lifetime of pleated filter cartridge.
--Low cost because of large filter area and reduces labor costs to change.
Specifications| Filter Media | PP, PET, Glass Fiber |
| End Cap Material | PP, ABS |
| Center Core | PP, ABS |
| Netting | PE |
| Seal Material | Silicone, EPDM, NBR, Viton |
| End Cap Types | DOE, -226/Flat End |
| Length | 10", 20", 30", 40" |
| Outside Diameter | 69mm |
| Inside Diameter | 28mm |
| Removal Rating | 1μm, 2μm, 5μm, 10μm, 20μm, 50μm |
| Operating Pressure and Temperature | The pleated cartridge construction will withstand differential pressures up to 60 psi(4bar) at ambient temperature |
| The optimum change out differential pressure | 35 psi(2.5bar) up to 52ºC |
| Service condition | 500 kPa(5bar) by 20ºC
300 kPa(3bar) by 65ºC |
--Chemical
--Oil & Gas Industry
--Metal Treatment
--Process Water
--Electronis
--Coatings, Paint
--Petroleum
Order InformationDLMFF*#=+x(e. G., DLMFF40PP5EI = 40"PP, 5um, Seal Material:Silicone, -226/Flat End
* Refers Length(inch) # Refers Filter Media
10" PP PP
20" GF Glassfiber
30" PET Polyester
40"
=Refers Rating + Refers Seal Material
1 1um E EPDM
2 2um S Silicone
5 5um V Viton
10 10um B NBR
20 20um
50 50um
X Refers End Cap Types
I DOE
II -226/Flat End
| Code* | Removal Rating | Code= | Length | Code# | Media | Code+ | Seal Material | Code& | Code |
| 1 | 1µm | 10 | 10" | PP | Polypropylene | S | Silicone | F | DOE |
| 2 | 2µm | 20 | 20" | GF | Glass Fiber | E | EPDM | T | 222/Flat End |
| 5 | 5µm | 30 | 30" | PET | Polyester | B | NBR | | |
| 10 | 10µm | 40 | 40" | | | V | Viton | | |
| 20 | 20µm | | | | | | | | |
| 50 | 50µm | | | | | | | | |