Products

Vacuum Roots Pump (compressors) -Tri-Lobe Air Cooling Roots Vacuum Pump

China Vacuum Roots Pump (compressors) -Tri-Lobe Air Cooling Roots Vacuum Pump, Find details about China Boosters, Roots from Vacuum Roots Pump (compressors) -Tri-Lobe Air Cooling Roots Vacuum Pump

Model NO.
RH12542
Type of Technology
Positive Displacement Blowers
Rotating Speed
650-2120rpm
Motor Power
0.75-250kw
Medium
Air, Neutral Gases
Trademark
RH
Transport Package
Standard Wooden Case
Specification
adjustable
Origin
China
HS Code
8414599010
Model NO.
RH12542
Type of Technology
Positive Displacement Blowers
Rotating Speed
650-2120rpm
Motor Power
0.75-250kw
Medium
Air, Neutral Gases
Trademark
RH
Transport Package
Standard Wooden Case
Specification
adjustable
Origin
China
HS Code
8414599010
Product Description

Introduction

A variety of vacuum pumps and compressors are used in the woodworking industry. The pumps are also used in woodworking as central vacuum systems; to improve inefficiencies; and to minimize costs associated with hook-ups and special foundations which are no longer needed.
Roots vacuum pumps, or vacuum boosters, are dry vacuum pumps that are used together with backing pumps in a wide range of applications where large pumping speeds are required.

Applications

 

Wood drying

The use of vacuum dryers in conventional wood drying chambers can reduce a typical drying time from several weeks to a mere 3 to 4 days.

Holding and lifting

To ensure safe processing, work pieces are automatically clamped to the processing table by means of suction heads. A stable and constant minimum vacuum must be generated to ensure that work pieces are held securely in place during mechanical processing.

Preservation

Before or after processing, wood must be protected against the destructive effects of environmental influences such as heat, moisture, insects and micro-organisms. The practice of soaking the wood in a preservative solution is widespread, but has the disadvantage that the liquid penetrates only a few millimeters into the wood. Complete protection is possible, however, if the wood is degassed and dried with the aid of a vacuum pump. The preservative agent then penetrates much deeper and optimizes the protective effect.
Paper manufacturing and processing
  1. Pre-Press
Vacuum is required for a variety of applications in the pre-press area, including preparing images and film for scanning or exposure and for copying printing plates. There are also many applications where over-pressure is needed as well, such as for guiding plates or film in automatic systems.
  1. Press
In classic sheet fed offset presses, vacuum and over-pressure is always needed for paper handling - at the feeder to separate the sheets, to feed the single sheets to the different color-aggregates or to guide the sheets through the machine. All these applications need different amounts of air at different pressures.
  1. Post-Press
There are a variety of applications in the post-press arena. For example, side-channel blowers for folding and cutting machines; pressure-vacuum pumps and individual vacuum pumps and compressors for collating and book-binding machines; and radial blowers for removing waste paper

Advantages
  1. robust and economical
  2. dry running
  3. modular design
  4. process safe and reliable
  5. available as single aggregates
  6. many accessories
  7. frequency control availabl
     
Vacuum Roots Pump (compressors) -Tri-Lobe Air Cooling Roots Vacuum Pump
Company Profile
Vacuum Roots Pump (compressors) -Tri-Lobe Air Cooling Roots Vacuum PumpVacuum Roots Pump (compressors) -Tri-Lobe Air Cooling Roots Vacuum PumpVacuum Roots Pump (compressors) -Tri-Lobe Air Cooling Roots Vacuum PumpVacuum Roots Pump (compressors) -Tri-Lobe Air Cooling Roots Vacuum PumpVacuum Roots Pump (compressors) -Tri-Lobe Air Cooling Roots Vacuum PumpVacuum Roots Pump (compressors) -Tri-Lobe Air Cooling Roots Vacuum Pump
Certifications
Vacuum Roots Pump (compressors) -Tri-Lobe Air Cooling Roots Vacuum Pump
 FAQ

1.Are  you direct manufacturer or trading company?
We have our own factory and international department.
We produce and sell all by ourselves.
 
2.Do you have an extended warranty?
Yes, every product is 1 year quality warranty under customer correct using the products.12 months warranty and long-term marketing, after-sales support.
3.If you have a designated forwarder ?
Please contact us and provide destination port details. We have own forwarder. Working term is very fexible in our company.

4. What is your terms of packing?
Generally, we pack our goods in fumigation-free wooden case.

5.What is your terms of payment?
usually T/T 30% as deposit, and 70% before delivery. We'll show you the photos of the products and packages before you pay the balance.

6.What is your terms of delivery? 
EXW, FOB, CFR, CIF, DDU.

7.How about your delivery time?
Generally, it will take 30 days after receiving your advance payment. The specific delivery time depends on the items and the quantity of your order.

8.Can you produce according to the samples?
Yes, we can produce by your samples or technical drawings.
9.What is your sample policy?
We can supply the sample if we have ready parts in stock, but the customers have to pay the sample cost and the courier cost.

10. Do you test all your goods before delivery?
 Yes, we have 100% test before delivery

11. How about the price?
The price is negotiable. It can be changed according to your quantity or packaging.When you are making an inquiry, please let us know the quantity you want.  

12.Do you accept OEM order?
Yes,we can produce as client's request.OEM and ODM order are accepted, any kind of logo printing or design are available.

If these FAQ do not help you solving your problems, please do not hesitate to let us know your requirent.

You Might Also Like