Products

Powerline ethernet bridge used in the intelligent robot inspection system of distribution station

China Powerline ethernet bridge used in the intelligent robot inspection system of distribution station, Find details about China Powerline Adapter, Powerline Ethernet Bridge from Powerline ethernet bridge used in the intelligent robot inspection system of distribution station

Model NO.
WD-1001M-DIN(HV3)
Trademark
Wondertek
Transport Package
Paper Carton
Specification
120*89*44mm
Origin
China
HS Code
85176990
Model NO.
WD-1001M-DIN(HV3)
Trademark
Wondertek
Transport Package
Paper Carton
Specification
120*89*44mm
Origin
China
HS Code
85176990

Industrial Powerline Ethernet Bridge
Wide Voltage(150V-630V) 

WD-1001M-DIN(HV3)    

Powerline ethernet bridge used in the intelligent robot inspection system of distribution station
Powerline ethernet bridge used in the intelligent robot inspection system of distribution station

Overview:
 
WD-1001M-DIN(HV3) industrial powerline ethernet bridge is an industrial powerline communication product developed by Kunshan Wondertek Technology Co., Ltd. The product adopts the ITU-T G.9960 G.hn communication protocol standard, has been widely used in intelligent manufacturing, intelligent building, intelligent city street lamp, intelligent electricity meter, solar panel monitoring, communication in dangerous environment, maritime applications, automotive applications, aerospace applications, railway, mining, intelligent storage, intelligent sorting, Automatic garage and other wired or sliding contact line and many other sites.
                      
Product Features
Packet loss:≤0.1%(100M,load 70%) 
Support 7*24 hours all weather operation;
Hardware watch dog function;
Low delay communication 
Wide voltage input
NDIM (Near Field Interference)
 
Product Technical Characteristics
3.1 Technical parameters            
  1. support G.hn protocol standard.
  2. Industrial DIN standard installation or fixed installation method.
  3. rate adaptive.
3.2 Administrative
  1. Remote Firmware Update (TR069).
  2. 802.3D Ethernet Bridge.
  3. 802.1Q VLAN.
  4. Quality of Service(QoS) .
  5. IGMO(IPv4)Snooping&MLD(IPv6)Snooping
3.3 The work environment
  1. The working temperature of the working environment is -40ºC-85ºC.
  2. Operating environment Operating temperature :10%-85% non-condensing state Preservation humidity 5%-90% non-condensing state.
3.4 Design criteria
  1.  ITU-T G.9960
  2.  IEC 60529
  3.  IEC 50022
  4.  IEC 60068-2-6   
3.5 Specification
Interface1*LAN 10/100/1000Base-TX self Adaption RJ45,MDI/MDX
Operating voltage rangeAC150-630V/DC200-890V
LED display LightEthernet   PLC   Power 
Transfer frequency2-50MHz and MIMO
Protocol(PHY)ITU-T G.9960 (G.hn) IEEE802.3,IEEE802.3x, IEEE802.3u
Security128-AES
Transfer rate(PHY)1000Mbps
Number of each Group7
ModulationOFDM
Effective transfer rateTCP/IP  500Mbps
ManageabilityRemote Firmware update,support TR-069(optional)
802.1D Ethernet Bridge
802.1Q VLAN
Quality of Service(QoS)
Operating temperature-40ºC-85ºC
WeightAbout 0.30kg
Operating environmentOperating humidity:10%-85%(no condense)     
 Storage humidity: 5%-90% (no condense)
CertificationFCC,CE class B,WEEE,RoHS
Transmission distance800m  Max
Transmission linesThree-wire transmission  MIMO Mode

3.6 Immunity Of ESD
The testing voltage which the device should be beared: ±6kV direct Discharge, ±8kV air discharge;Discharge number in Each sensitive testing point: Plus-n-Minus 10 times each;
Every time the discharge interval is 1 s.
According to B/T 17626.2-2006.
3.7 Immunity of Electrical Fast Transient Impulse Group(Common mode)
The testing voltage which the device should be beared:
Between the power supply voltage port and ground: ±2.0kV;
Between signal circuit and ground: ±1.0kV;
Repetition frequency: 5KHz;
Test duration: 1 min/ time;
Testing times: Plus-n-Minus 5 times each.
According to GB/T 17626.4-2008.
3.8 Anti Interference of Surge Impact
The testing voltage which the device should be beared: ±2kV;
The interval of continuous impulses: 1min/time;
Test number: Plus-n-Minus 5 times each.
According to GB/T 17626.5-2008.(protection: all models protection and varistor series of discharge tube type)
3.9 Anti- Vibration
Meet the demand of MX3 in TB1433(0-200Hz,2g acceleration,  maximum amplitude 7mm), interface with no loose, device with no Sealing off and drop in the test.

4. Connection Topology Diagram
Powerline ethernet bridge used in the intelligent robot inspection system of distribution station

5. Mounting Dimension Drawing
Powerline ethernet bridge used in the intelligent robot inspection system of distribution station
Certificate:

Powerline ethernet bridge used in the intelligent robot inspection system of distribution station

You Might Also Like