DIN Rail Industrial Powerline Adapter Network Extender PLC Ethernet Bridge

China DIN Rail Industrial Powerline Adapter Network Extender PLC Ethernet Bridge, Find details about China Powerline Adapter, Powerline Ethernet Bridge from DIN Rail Industrial Powerline Adapter Network Extender PLC Ethernet Bridge

Model NO.
WD-1001M-DIN
Trademark
WonderTek
Specification
1000Mbps
Origin
China
HS Code
8517699000
Model NO.
WD-1001M-DIN
Trademark
WonderTek
Specification
1000Mbps
Origin
China
HS Code
8517699000
Specifications

Model: WD-1001M-DIN(T/V)  WD-1001M-DIN(D)
Interface: 1*LAN 10/100/1000Base-TX self adaption RJ45,1*AC power interface: MDI/MDX support
            or 1*LAN 10/100/1000Base-TX self adaption RJ45,1*DC power interface MDI/MDX  support
LED display light: Ethernet, PLC link ,power 
Transfer band: 25,50 and 100MHz and MIMO (based on G.9963)
Protocol(PHY)IEEE802.3,IEEE802.3x, IEEE802.3u   G.Hn
Security:128-AES
Transfer rate(PHY):1000Mbps
Modulation: OFDM
Effective transfer rate(TCP/IP):  400Mbps    
ManageabilityRemote Firmware update,support TR-069(optional)
 802.1D Ethernet Bridge  802.1Q VLAN
 Quality of Service(QoS) IGMO(IPv4)Snooping&MLD(IPv6)Snooping
Working voltage: AC 90V-520V  18-75VDC
100V-700VDC
 
Operating temperature: -40ºC-80ºC
Size: 120*89*44 (mm)(L×W×H)(not include installation hook)
Weight0.35kg0.30kg
Operating environment
Operating humidity:10%-85% (no condense)
Storage humidity: 5%-90%(no condense)
CertificationFCC,CE class B,WEEE,RoHS

 Features
Packet loss:≤0.1%(100M,load 70%) 
Support 7*24 hours all weather operation
hardware watch dog function
PING≤2MS
The quantity of the group ≤16pcs
Immunity of ESD
The testing voltage which the device should be beared: ±6kV direct Discharge, ±8kV air discharge. Discharge number in Each sensitive testing point: Plus-n-Minus 10 times each, Every time the discharge interval is 1 s, according to B/T 17626.2-2006.
Immunity of electrical fast transient impulse group(Common mode)
The testing voltage which the device should be beared: between the power supply voltage port and ground: ±2.0kV, between signal circuit and ground: ±1.0kV, repetition frequency: 5KHz, test duration: 1 min/ time, testing times: Plus-n-Minus 5 times each. According to GB/T 17626.4-2008.
Anti interference of surge impact
The testing voltage which the device should be beared: ±2kV, the interval of continuous impulses: 1min/time. Test number: Plus-n-Minus 5 times each. According to GB/T 17626.5-2008.(protection: all models protection and varistor series of discharge tube type)
Anti- vibration 
Meet the demand of MX3 in TB1433(0-200Hz,2g acceleration,  maximum amplitude 7mm), interface with no loose, device with no Sealing off and drop in the test. 

DIN Rail Industrial Powerline Adapter Network Extender PLC Ethernet Bridge
DIN Rail Industrial Powerline Adapter Network Extender PLC Ethernet Bridge
DIN Rail Industrial Powerline Adapter Network Extender PLC Ethernet Bridge