Digital Flush-Mounting Discussion Delegate Unit Microphone

China Digital Flush-Mounting Discussion Delegate Unit Microphone, Find details about China Conference System Microphone, Flush Mount Microphone from Digital Flush-Mounting Discussion Delegate Unit Microphone

Model NO.
VIS-DCD-F
Trademark
VISSONIC
Transport Package
Carton
Specification
100W*40D*65H mm (without microphone)
Origin
China
Model NO.
VIS-DCD-F
Trademark
VISSONIC
Transport Package
Carton
Specification
100W*40D*65H mm (without microphone)
Origin
China
 
Features
 
  1. Stylish, low profile design with touchable interface
  2. Standard CAT5e and RJ45 connectors are used in CLEACON series to provide more convenient on projects and maintenance.
  3. Pluggable gooseneck microphone
  4. Priority button and approval button on chairman unit VIS-DCC-F
  5. 3.5 earphone jack
  6. 48 kHz audio sampling rate
  7. Anti RF interference from cell phone or similar devices. 
  8. Hot plug and play
  9. The discussion unit VIS-DCC-F/ VIS-DCD-F can be used independently or connected to VIS-DVU-FS and VIS-SPK-F.

Digital Flush-Mounting Discussion Delegate Unit Microphone
Functions
 
-Compliance with IEC 60914, GBT 15381-94
-The unique AUDIO-LINK digital ring network technology achieve full-digital signal transmission and processing, completely avoid the RF interference from cell phone or similar devices.
-Single CAT5e cable transmits 64 channels of audio and various information.
-High fidelity sound by zero loss audio transmit technology, 48K audio sampling frequency, 20Hz~20KHz response frequency
-"Hand-in-Hand-Loop-Network" connection makes the system always working perfectly no matter changing discussion unit or having any malfunctioned units
-This system is assigned to each unit independently ID to avoid duplicate ID conflict
-AGC (Automatic Gain Control)/AFC (Adaptive Feedback Cancellation)/ANC (Active Noise Control)/Mix (Auto-Mix) technology
-Hot-swap for any system unit, and the controller has auto-recovery function
-Precise cardioid directional microphone capsule with anti-wind microphone foam, with two-color LED indicator
-Button for MIC ON/OFF, Priority & Apply Answer button for chairman unit
   without using PC software, our conference controller still owns following settings:
       · Limit on the number of speaking persons: By Setting the number of active units at the same time (Number is 1/2/4/6/ units)
      ·  Discussion modes:
"OPEN" Free for all, limited by the active units setting by controller, "OVERRIDE" First in First out, "VOICE" Can activate MIC by detecting sound without press button, "APPLY" To apply then to speak
       · 
Chairman unit has priority to close all other units or mute them temporarily
       · Chairman unit can consent the request for speaking from delegate
       · Support simultaneous language interpretation by connected to the channel selector
-Work with VIS-CDC series HD camera and VIS-CATC-A switcher, it can realize camera auto tracking function
 
 Flush mounting conference system diagram

Digital Flush-Mounting Discussion Delegate Unit Microphone 
Technical Parameters
Button: Touchable interface
Sound Pickup: heart type capacitance
Sensitivity: -46 dBV / Pa
Maximum power consumption: 2.0W
Directivity: 0 ° / 180 °> 20 dB (1 kHz)
Headphone load: 16Ω
headphone volume: 10mW
Headphone jack: 3.5mm stereo
Input impedance: 2kΩ
SNR: 70dB
Frequency response: 20 ~ 20000Hz
Equivalent noise: 20dBA (SPL)
Main material: Aluminum
The maximum sound pressure: 125dB (THD <3%)
Weight: 0.6kg (with microphone)
Dimension: 100L × 4065H mm (without microphone)
Operating temperature: 0 ºC to + 55 ºC
Color: Black

Digital Flush-Mounting Discussion Delegate Unit MicrophoneDigital Flush-Mounting Discussion Delegate Unit MicrophoneDigital Flush-Mounting Discussion Delegate Unit MicrophoneDigital Flush-Mounting Discussion Delegate Unit MicrophoneDigital Flush-Mounting Discussion Delegate Unit MicrophoneDigital Flush-Mounting Discussion Delegate Unit Microphone