fetal monitor multi-parameter patient monitor price
Display: 10.4 inch color TFT LCD screen with monitor wave and data
Monitor the FHR( fetal heart rate), TOCO, FM(fetal movement) and FM waveform.
Calculation and display of auto/manual fetal movement
The color of parameters and waveforms settable as per user's preference
At least 24 hours CTG data storage, selectable review and print after power off
25mm/s high speed printing of stored CTG data
Print-speed Selectable: 1cm/min\2cm/min\3cm/min\25mm/sec
Alarm reviewable
Auto/manual patient ID generation, easy user-management & data searching.
Audio and visual alarm; Lightness and volume are adjustable
Alarm & remark are available for probe moving and abnormal condition
Display/offset print of Twins FHR(fetal heart rate) waveform
3 display mode: Fetal, fetal and maternal, maternal, either mother or fetal emphasis
morning selectable Real-time print and timing print
Event remark function
Built-in rechargeable high energy battery
The printer's buffer, selectable and auto shutdown printing are available.
Independent network function available. Support remote, wireless, wired mixed central
monitor network.
Optional maternal monitoring function.
FM-10A FHR, TOCO, fetal movement, built-in battery, 110mm wide-line printer
FM-10A Plus FHR, TOCO, fetal movement, built-in battery, 110mm wide-line printer, maternal parameters include NIBP, SpO2, PR, ECG, RESP, TESP
Optional item Twin FHR, Fetal awake-up alarm, wireless network
Below is spec:
| FHR (Fetal heart rate) | Ultrasound frequency | 1MHz± 1KHz |
| Measurement range | 30~240bpm |
| Resolution | ± 1bpm |
| Alarm & accuracy | Up limit (30~240)bpm,± 5% |
| Lower limit | (30~240)bpm,± 5% |
| TOCO | Range | 0~100% |
| Resolution | 1% |
| Zero-mode | Manual. 5, 10, 15, 20 TOCO base-line adjustable |
| Pressure measure accuracy | 7% |
| Fetal movement | Manual and auto fetal movement mark |
| Auto fetal movement waveform |
| Wide-line printer |
| Printer paper | Foldable Z-type thermal paper |
| Width | 110mm/152mm |
| Printing speed | 1cm/min, 2cm/min, 3cm/min and fast buffer
printing of 25cm/sec |
| Power supply | 100~240VAC, 50/60Hz |
| Fetal mode | Fetal/maternal mode |
| Maternal mode |
| Model Function Configure |