Products

Tyre Changer for Heavy Duty Truck

China Tyre Changer for Heavy Duty Truck, Find details about China Tyre Changer, Tire Changer from Tyre Changer for Heavy Duty Truck

Model NO.
HLD-LC-2
Condition
New
Power
380V
Motor
1.5kw
Maximam Workable Tyre Sizes
2900mm
Trademark
Haolida
Specification
ISO9001
Origin
Shandong, China
HS Code
8428909090
Model NO.
HLD-LC-2
Condition
New
Power
380V
Motor
1.5kw
Maximam Workable Tyre Sizes
2900mm
Trademark
Haolida
Specification
ISO9001
Origin
Shandong, China
HS Code
8428909090
                   HLD-LC-2 Model Tyre Changer for Heavy Duty Truck 

 General introduction:
This tyre changer,with two interworking operation part through the slider, it is convenient to isntall and dismounting the tyre;
With the hinge joint operation platform, it can move the tyre tyre to the preset position through mechanical control, it is convenient and quick to work, save time and labour.
Set the sliding fixed jaw on the operation platform, it can fix the steel rim on the platform through manual or mechanical control, it is easy to operate and with high working efficiency.
Features:
1.      Automatic tyre changer hook, displace crowbar, it saves both time and labour
2.        Standard configuration spacer, European standard, it is a safe to the operator.
3.        Equipped withΦ80 small oil cylinder to the big board, the rim can lift 106kgs; jack catch is buillt-in and adjustable, increase the tyre dismounting sizes.
4.        The control basis can stop at any position, it is convenient to clamp the tyres
5.        Φ200 big oil cylinder, the pressure can reach 2800kgs, it can separate the tyre and rim easily.
6.        It is with characters of saving time and labour, high working efficiency, not damage the tyre and rim.
7.        Increased height and length right auxiliary arm system, it increase the working area.
 Tyre Changer for Heavy Duty Truck
Structure:
1.      Power source: three phase
2.      Regulate the pressure regulating valve: counterclockwise rotation to increase the pressure, clockwise rotation to decrease the pressure
3.      Switch: rotate the red switch clockwise
4.      First, adjust the mechanical arm on the upright support, move up and down
5.      Second, adjust the operation platform by clockwise or counterclockwise rotation
6.      Third, adjust the working platform angle
7.      1st mechanical governor lever: adjust the length of the extension bar according to the tightness of tyre mouth 
8.      Fix the tyre: fastening the steel rim of the tyre by moving the fixed jaw outwards
 Tyre Changer for Heavy Duty Truck

You Might Also Like