Hydraulic Controll Truck Mounted Drilling Rig for Sale
China Hydraulic Controll Truck Mounted Drilling Rig for Sale, Find details about China Truck Mounted Water Well Drilling Rig, Truck Mounted Drilling Rig from Hydraulic Controll Truck Mounted Drilling Rig for Sale
Main features:
1. C600HW truck mounted drilling rig is a rotary table drilling rig.
2. The truck chassis adopts the special crane chassis of brand HOWO 6*4 TRUCK and the main drive system, the transfer case, gearbox, double-hydraulic winch unit, mud pump, rotary table, drilling tower, are set up on the chassis.
3. This rig is a rotary drilling rig with directional circulation. It is equipped with mud pump which adopts the slurry as the washing fluid and can drill on clay, sand and rock if it is equipped with suitable drilling bit.
4. There is a independent diesel power: Cummins 132Kw;
5. The main drive of rig is mechanical and the four hydraulic leveling legs and drilling tower are hydraulic controlled. Transfer case and mud pump clutch system are air operated. 6. The rig can carry out down-the-hole hammer drilling if add Compressor(There is no enough room for compressor on the chassis).
7. The appearance of rig is pretty. It is high efficiency because of having a larger torque of the rotary table and is mainly used for water well in industry and agriculture, national defense building foundation, and geothermic well and other foundation working, it is popular at home and abroad.
Main features:
| Technical parameter | |||
| Drilling depth(M) | 600 | ||
| The open hole(mm) | 500 | ||
| The end of hole(mm) | 200 | ||
| Speed of rotary table(r/min) | 12;20;35;48;82;115;10(reverse) | ||
| Torque of rotary table(KN.m) | 5.4---50 | ||
| Single rope lifting capacity of main winch(T) | 5 | ||
| Maximum lifting capacity of main winch(T) | 30 | ||
| Single rope lifting capacity of vice winch(T) | 5 | ||
| Max lifting capacity of vice winch(T) | 20 | ||
| Inner diameter for swivel(Inch) | 2.5 | ||
| the max bearing pressure for swivel(Mpa) | 10 | ||
| The max bearing capacity for swivel (T) | 30 | ||
| The lifting capacity of hook(T) | 30 | ||
| Bearing capacity of mast (T) | 36 | ||
| The height of drilling tower (mm) | 12500 | ||
| The independent power | Cummnis: 132Kw | ||
| Drill pipe | Kelly bar(mm) | 108×108×7500 | |
| Assistant pipe (mm) | Ф89×10×5500 | ||
| Liner Diameter (mm) | 100 110 120 130 140 | ||
| WB3NB-130 Mud pump | Stroke of piston (mm) | 160 | |
| Theoretical flow (L / S) | 8.4 10.3 12.2 14.3 16.6 | ||
| Rated pressure (Mpa) | 10 8 7 6 5 | ||
| Diameter of suction tube | 152mm | ||
| Diameter of discharge pipe | 65mm | ||
| Input power kW(HP) | 95 (130) | ||
| Drive form | 6×4 | ||
| Truck chassis | Engine | Model | ZZ2257M5657 |
| Rated power(HP) | 266 | ||
| The highest speed(Km/h) | 75 | ||
| Weight (kg) | 29500 | ||
| Transport size(L*W*H)(mm) | 13350×2500×4215 | ||
The specifications are subject to change without prior notice due to continued research and development.
Related Product
Our Company & Service
Glorytek Industry (Beijing)Co.,Ltd., located inBeijing,China, is an integrated corporation specialized in manufacturing and exporting top quality drilling equipment and drilling parts for decades. We are supported and assisted by a highly experienced team of designers and engineers that enable us to complete all the assigned projects successfully as per the specified requirement from our clients.
FAQ
Q: How can we choose a suitable water well drill rig?
A: We normally recommend a suitable model according to drilling depth, drilling hole dia. and layer condition on site.
Q: Are you a factory or a trading company ?
A: We are an integrated corporation specialized in manufacturing and exporting.
Q: What is your payment terms?
A: We can accept T/T,L/C.
Q:.What is your MOQ? How long is the delivery time?
A: Our MOQ is 1 sets. Normally for drill rig, the delivery time is about 25-30 days after receiving payment, the drilling tools would be about 3-5 days.
Q:. How long is the warranty?
A: The guarantee period for mainframe is one year (excluding the quick wear parts).
Q: Can we print my Logo on the products?
A: Yes, we can. We support OEM .
Contact
Sunny Dong(Sales Representative)
Glorytek Industry (Beijing) Co., Ltd.
Address:No.B-2507, DongWeiCheng, GuanZhuang,Chao Yang District, Beijing, China.
Website: glorytek.en.made-in-china.com / glorytek.en.made-in-china.com
You Might Also Like
30-50cbm Movable Hopper for Discharging Bulk Cargo
4b-Wd Bsp Male ED Sealing Plug
Standard Specimen Clamp for Microtome
Luxury Crystal Glass Scent 30ml 1 Oz Perfume Bottle
Tetra Pak Sugar Dissolving System
High Quality Factory Supply Zinc Plated Pozi Countersunk Chi......
Improve Root System Root Promoter Seaweed Functional Organic......
Creative Handmade Three-Dimensional Photo Frame Outside Thic......
Jinko Panel High Quality Pmw Dimming Controller Ni-MH Batter......
80/20 Copper Nickel ( CuNi20 )
Natural Blue Gemstone Stone Oval Vanity Hotel Wash Basin Sin......