High Speed Twisting Machine for Stranding Cored Wires and Copper Cables

China High Speed Twisting Machine for Stranding Cored Wires and Copper Cables, Find details about China Stranding Machine, Twisting Machine from High Speed Twisting Machine for Stranding Cored Wires and Copper Cables

Model NO.
SS-NST1000
Type
Single Stranding Machine
Motor Brand
Siemens
Inverter Brand
Siemens
PLC
Siemens
Touch Screen
Siemens
Low-Voltage Electrical Parts
Scheinder
Bearing
SKF or NSK
Painting
Customzied
Trademark
SINO STAR
Transport Package
Wooden Cases
Specification
L5200*W2300*H2500
Origin
Dongguan, China.
HS Code
8479400000
Model NO.
SS-NST1000
Type
Single Stranding Machine
Motor Brand
Siemens
Inverter Brand
Siemens
PLC
Siemens
Touch Screen
Siemens
Low-Voltage Electrical Parts
Scheinder
Bearing
SKF or NSK
Painting
Customzied
Trademark
SINO STAR
Transport Package
Wooden Cases
Specification
L5200*W2300*H2500
Origin
Dongguan, China.
HS Code
8479400000
High speed twisting machine for stranding cored wires and copper cables

SINO STAR New type high speed single twisting machine for stranding wire and cable suitable for bobbin from DM1000mm to DM1250mm


We have been producing NEW TYPE high speed single twisting machine since 2006 and have exported many sets of this kind of machines to our overseas customers from Italy, Spain, Morroco, Romania, Slovakia, Chile, Ecuador, Bolivia, Brazil, Japan, Vietnam, Thailand, Russia, Uzbekistan and Iraq etc. We have been dedicated into making cable machine for over 3 decades; I am pretty sure that we can offer you the best solution for the cable production line with the most competitive price and excellent service. 

1.Application:

This production line is intended for the high speed multi-core wire&cable cabling and stranding of all kinds of power wires, cat 5, cat 6, cat 7 data cable, communication cable and other special cables. And it can also finish central tapping, side wrapping and cross binding at the same time.

2. Main characteristics:

* High output: high rotary speed, the speed of this new single twisting machine is the most highest among the same models made in China and its production efficiency is twice of the traditional single twisting machine.

* Robust: Cantilever is made of imported aluminum alloy, combination type, light weight, high strength without deformation for ensuring high speed running. The mainframe base and frame are reinforced. The actual weight of the mainframe can be up to 13 tons, which improves the steability of running dramatically.

*Stable tension: Tape and take-up tension keep constant from empty bobbin to full bobbin.

*Precise pitch: PLC control+ frequency conversion adjustment. All parameters of the complete machine can be set and stored on the touch screeen. The pitch is very stable and its error is less than 3% in the course of accelerating and decelerating.

* Neat traversing: take-up traversing postion adopts axial traversing type. Traversed scope and traversed distance can be set arbitrarily on the touch screen.
*High quality: less blending, product electrical performance won't be destroyed.

3. Main technical parameters of our main models
 
ModelSS-NST-1000SS-NST-1250
Cored wire specificationΦ0.5-Φ5.0mmΦ1.0-Φ6.0mm
Stranded outside diameterΦ20mmΦ25mm
Pitch range30-300mm40-400mm
Steady working speedMax.650 rpmMax. 400 rpm
Equipment power24KW30KW
Tapping typeHorizontal high speed central tapping machine
Stranding directionEither left or right stranding direction
Tapping tensionAutomatic tracking tension
Traversing wayAxial traversing type takeup to make sure the wire won't be pulled or pushed in the course of traversing, so the wire won't be damaged.

4. Composition of the new type single stranding machine line

1. Meter-counting stand -------------------------------- 1 Unit
2. Eyelet assembly stand---------------------------------1 Unit
3. Central tapping unit-----------------------------------1 Unit
4. 1250mm single stranding machine -----------------1 Unit
5. PLC electrical control system-----------------------1 Unit
6. Motoried payoff---------------------------------------8 Units

5. Electric control cabinet introduction

1.This equipment is controlled by PLC + touch screen so as to achieve the goal of high integration, high automation and man-machine exchange.
2. The pitch can be set stepless within the pitch range.
3. Stranding direction and taping direction can be chosen arbitrarily.
4. Taping can be inch-moving and interlock-moving. When the switch is in OFF state namely inch-moving, it can start and set speed independently. When the switch is in ON state namely interlock-moving, at this time single twisting machine and taping unit will start automatically.
5. Alarm function: when the equipment fails, it will automatically jump out the fault point under the screen, there are 2 kinds of alarm:
  A: Rolling alarm: mobile alarm under the screen.
  B: Historical alarm: this alarm can be saved when it occurs and can be viewed when repairing.
6. This equipment is equipped with many protections such as door limit, bobbin in place detection, platform lifting position detection, disconnection detection and so on one complete set of protection detection device to ensure that the machine can work steadily and normally.
7. This equipment has the function of length predicting and decelerating. When the actual length reaches the pre-set length, the machine will slow down to stop automatically.
8. Meter correction: it can make the meters more accurate after being stranded.
9. Clamping wire function: automatically clamping wire after the machine stops for avoiding the influence of pay-off tension when replacing bobbins that makes the wire backward, in this case it can guarantee the taping effect and pitch.
10. When the taping unit is magnetic powder tension, it can track the taping tension linearly.
11. Power system: 3 phase 5 line system, 380V(±10%) 50HZ

The photos of NEW TYPE single twisting machine with built-in capsta are listed out below for your reference.


High Speed Twisting Machine for Stranding Cored Wires and Copper Cables

High Speed Twisting Machine for Stranding Cored Wires and Copper Cables

High Speed Twisting Machine for Stranding Cored Wires and Copper Cables
High Speed Twisting Machine for Stranding Cored Wires and Copper Cables
High Speed Twisting Machine for Stranding Cored Wires and Copper Cables
High Speed Twisting Machine for Stranding Cored Wires and Copper Cables
High Speed Twisting Machine for Stranding Cored Wires and Copper Cables


PACKAGE AND SHIPPING:

 Nomally we use wooden cases or PFfilm to pack our machines as required to guarantee that our machines won't been damaged in the course of long-disance sea transportation.


High Speed Twisting Machine for Stranding Cored Wires and Copper Cables
High Speed Twisting Machine for Stranding Cored Wires and Copper Cables
High Speed Twisting Machine for Stranding Cored Wires and Copper Cables


Our Service 

Pre-sales service including:
- Analyse customer's inquiry and reply to customer within 12 hours after receiving the inquiry from customer.
- Communicate with customer and help customer to choose the well-suitable machines for customer.
- Sending drawings to customer for confirmation to make all is clear before placing order with us.
- Prepare the final proposal for customers
- Invite customer to visit our factory or we can visit our customer's factory to held a face-to-face meeting if possible

After-Sales Service

- Training customer's workers how to install, operate and maintain our machines 
- Engineers available to provide overseas maintenance service for all our machines working abroad.

Customers Q&A: 

A1: Are you the manufacturer or trading company ?
Q1: We are the factory with 3 big workshops covering 6000 s.q.m; Warmly welcome you to visit our factory and conduct our work.

A2: What's your factory's advantage over other manufacturers in the same industry ?
Q2 - High output capacity will guarantee your high-efficient production
     - We are very good at engineering; In order to make our machine have a very excellent performance; we are rigorously attaching importance to each detail in the course of manufacturing in a bid to improve our machines continuously.
     - We only mount electrical components under famous brands like Siemens,Yaskawa, Scheinder
and Omron on our machines to guarantee the quality of our machines.
     - Our engineers and workers can work abroad; if you need us to assist you installing and testing
the machines or training your staff how to operate and maintain our machines; we can send our team to your factory when our machines arrive at your factory.
     - Guarantee period: We can guarantee two years for all our machines
     - After-sales service: We promise to provide permanent technical support and after-sales service with our customers.
A3: Why do we trust your company ?
Q3: We have been engaging into cable machinery industry for over 30 years and have agent in Europe since 2007. Up to now we have exported our machines to many countries.

A4: Where is your factory ? How can we visit you ?
Q4: Our factory is located in Dongguan, Guangdong Province, China, very close to Shenzhen and Guangzhou. You can pick you up at Humen railway station (you can take high-speed train from Guangzhou South Railway sation or Shenzhen North station, it takes you only 10 minutes by high speed train to reach Humen Railway station)


We are sincere to long for working together with customers from all around the world. Warmly invite you visit our fatory DONGGUAN SINO STAR MACHINERY CO.,LTD at your convenient time !