The bag is made of three layers of special materials, the outermost layer is 60 grams of special peritoneal nonwoven fabric, the middle layer (bottom reinforcement layer) is 30 grams of special nonwoven fabric, and the innermost layer is low density high pressure polyethylene material (abbreviated as LLDPE ). 





Product name: Antiseptic body bag

Standard specifications: 80 * 210cm

Bearing range: 60 ~ 150kg (within correct operation)

Material specifications: the outer layer is 60 grams of non-woven fabric for film
            The middle layer is 30 grams of special non-woven fabric
            The inner layer is low density high pressure polyethylene material (LLDPE)

General medical protection level production process: the outer layer and the middle layer material are made of domestic conventional non-woven special medical materials, and the inner layer is made of special PE material, both of which meet the standards of pollution-free, non-toxic, and odorless; the inner layer PE is a single piece of material and the outer layer The non-woven fabric is sewn by professional technology to achieve anti-corrosion, anti-odor, anti-leakage and other isolation and protection effects; the outer layer and the middle layer are stressed layers, and there are 3 straps and 6 handles at specific positions on the bottom of the outer layer. After a special process to strengthen the load-bearing effect. A transparent label bag is placed on the front of the bag to place the label card, which is convenient for registration and transportation.
Related reference production executive standard: GB / T 5709-1997 GB / T2828.1-2012
                         WS / T511-201 Q2019-001 (Enterprise production standards) 

Instructions for use of the product: Before use, check whether the bag is intact and damaged. Open the zipper and check whether the inner layer is damaged. After confirming that it is correct, lay it on a flat surface, place the object into the bag, and check the appearance of the bag again. Damaged, after confirmation, pull the zipper to the end, place the object label card, first fasten the three straps to confirm, after 4 to 6 people test the handle to confirm that the handle is firm, you can carry out transportation and transportation-related operations . Operation reminder: keep the handle parallel to the corresponding personnel during operation to avoid unbalanced force caused by large pulling, which will affect the load-bearing effect and the purpose of safety protection