Wireless Transmission Signal Repeater Extender 4W 5.8GHz 36dBm RC Drones Enhanced Image Long Range Tx WiFi Booster
China Wireless Transmission Signal Repeater Extender 4W 5.8GHz 36dBm RC Drones Enhanced Image Long Range Tx WiFi Booster, Find details about China Cell Booster Network Repeaters, Cellular Range Extender from Wireless Transmission Signal Repeater Extender 4W 5.8GHz 36dBm RC Drones Enhanced Image Long Range Tx WiFi Booster
Excitingly small! Only 59g!
5-16V wide voltage range;
5.8GHz, Max. 4000mW output power;
Aluminum-alloy case by CNC, anti-interference;
Full kit, easy to install; light weight, small size, protable;
Designed for Drones, UAV, RC equipment....
♦ TX only, Only transmit the signal, turn off the receive the signal, the drone remote control terminal can get clearer video and image.
Cell phone Amplifier Description: 4000mW 5.8Ghz 36dBm WiFi Signal Booster
| SKU | 0305SH200789 |
| Model | SHPro58GTX4W |
| Operating Range | 5.0~5.875 GHz |
| Channel width | 20Mhz&40Mhz&80Mhz |
| Operating Mode | Bi-directional, half-duplex, time division duplex |
| Input power | 0~20 dBm (output power of the device = input power of the amplifier), Sunhans SH58Gi4000 booster input power 0~20dBm(18~19dBm will better), if the output power of the device is greater than 20dBm or the power is relatively small -2~6dBm,kindly let us know, we will give the suggestion to solove this question according to your actual situation. |
| Transmit gain | 17-20dB |
| Output Power | 4W (36dBm) |
| Supported standards | IEEE 802.11a/n/ac |
| Noise Figure | ≤3.5 dB typical |
| Frequency Response | ±1dB over operating range |
| Connector type | To radio SMA female(hole inside), To antenna RP-SMA female(pin inside) |
| Power supply | 5V~16V/2A DC |
| LED light | Power status LED and activity status LED |
| Material | Cast Aluminum |
| Booster Size | 9.2 x 4.1 x 1cm |
| Booster Weight | 59g |
| Package Size | 12 x 11 x 6.5cm |
- SHPro58GTX4W eSunRc WiFi booster
- RG141 20cm cable SMA male to RP-SMA male
- DC 2.5" to 12V 5.5" adapter
- DC 2.5" to USB adapter
- DC 2.5" to JST adapter
- Mounting Velcro
- User Manual
1. [Simply plug and play]
Extend the range of your wireless network with the Indoor Wifi Booster Amplifier.
Plug and play connections,no software, no configuration and virtually no setup of software.
2. [Compatible with any 5.8G wireless device],used for transmit need (TX Only).
Our product can support 5.8G Hz WLAN 802.11a,802.11n,802.11ac,5.8G Hz wireless AP, 5.8G Hz wireless bridge,5.8GHz wireless router, 5.8GHz wireless network card, 5.8GHz wireless monitoring(NVR,DVR), 5.8GHz wireless microphone, 5.8GHz bluetooth,RC drones,FPV device etc
3.[Maximum Output power].
The max output power can be up to 4000mW.
This amplifier will boost the transmit (TX Only) power of your wireless device a whopping 36dBm.
1. What is the WiFi signal booster?
The working mode of the WiFi signal booster needs to be connected to the signal source (customer device which cause wifi signal ) through one end of the cable, and the other end is connected to the antenna, and the WiFi signal range is expanded through the antenna.
2. About LED lights.
1). A flashing green light indicates that the wifi signal booster is powered on.
2).Normal operation is a red light flashing green, indicating that the signal booster receives the signal from the device and sends a wifi signal.
3. Can I install the Sunhans booster myself?
Of course, our products are easy to install and plug and play, and the product package contains instructions for each product.
1.Easy Installation.
2.Plug and play, no software setup.
3.3.5dB ultra-low noise. High Gain, High Value, High Performance.
4.Aluminum-alloy case by CNC, it can expand wifi signal range 10-20 times.
5.Can enlarge WiFi signal coverage range, as long as the frequency of the product can be applied.
6.Widely used in security, drones, urban hotspot coverage, railway hotspot coverage, etc.
Ideal for use with 5.8GHz Wireless LANs, Support 802.11a, 802.11n and 802.11ac ( 5.8GHz mode only).
About US
Our Service:
♦ Test process : every items will be testing before shipping, to make sure the quality.♦ Short leading time: 1-2.5 working days for samples or small order, 10-15 working days for bulk order.
♦ One year warranty: for you without trouble of after-sales maintenance.
♦ Quality Guarantee: Return rate is only 0.001.
♦ Support small orders: help your business from small to big.
♦ OEM & ODM are welcome.
You Might Also Like
Triac 0-10V Dali Dimmable Recessed LED Downlight/ COB LED Ce......
GMP Factory Supply Food Grade Phycocyanin Spirulina Extract
Table Tennis Racket with Rubber + Bag Ping Pong Bat
3mh Cool Giant Fat Inflatable Cat Cartoon for Advertising
Mslfp14 17*17 Wired Box Size X-ray Digital Flat Panel Detect......
Portable Glass Shape Edge Polishing Machine
A4 A3 Paper Wrapping Machine
Stainless Steel Angle Tube Strainer
Sinchold 9220/20/45 Forged Steel Welded Crane Rail Clips
Warehouse Tent Made by Superb Tent
Thyristor Rectified CO2 MIG Mag Arc Welding Machine