Each machine is put on a polywood pallet, then carton;

Wooden box or air bubble film and carton for plastic products or as your request.

Normally, for testing sample, we can arrange the delivery within 7 days;


Part V: FAQ

Q:Why can't the floor scrubber water absorption motor start?
1. Check whether the water volume of sewage tank is full.
2. Check whether the water level sensor in the sewage tank is blocked by foreign matters or fails.

Q:Why is sewage left on the ground?
1. Check whether the water absorption rubber strip is worn.
2. Check whether there is any foreign matter between the two suction strips.
3. Check the suction pipe for foreign material.
4. Check whether the suction filter is damaged or not clean.
5. Check whether the sealing ring of the sewage tank cover is in good condition.
6. Check whether the suction pipe is correctly connected to the suction grill.

Q:Why is the ground stained?
A:Check whether the brush / cleaning pad is used to clean the floor and stains.

Q: Why are water stains left on the ground?
A: 1. Whether the cleaned ground belongs to soft ground.
2. Check whether there is any foreign matter between the two suction strips.
3. Check whether the water absorption rubber strip is worn.
4. Check whether the suction grill is adjusted correctly.