Products

Kraft Dunnage Air Bag for Cargo Gap Filling Protection

China Kraft Dunnage Air Bag for Cargo Gap Filling Protection, Find details about China Dunnage Air Bag, PP Woven Inflatable Bag from Kraft Dunnage Air Bag for Cargo Gap Filling Protection

Dunnage Bag Inflation Pressure
2.6kg
Air Dunnage Bag Width Range
40cm-120cm
Container Dunnage Bag Length Range
50-330cm
PP Dunnage Bag Color
White+ Yellow
Trademark
ATXEL
Specification
1000mm*1800mm
Origin
China
HS Code
4819400000
Dunnage Bag Inflation Pressure
2.6kg
Air Dunnage Bag Width Range
40cm-120cm
Container Dunnage Bag Length Range
50-330cm
PP Dunnage Bag Color
White+ Yellow
Trademark
ATXEL
Specification
1000mm*1800mm
Origin
China
HS Code
4819400000
Product Name Kraft Paper Laminated Dunnage Bag
Outside Materials150g Kraft Paper Laminated PP Woven
Inner MaterialsPA (Polyamide, Nylon);
Enhance high barrier performance;
Work Pressure0.2-0.8 Bar / 3-10 PSI
Bursting InspectionAccording SGS Standard
Dunnage Bag Width50-120cm
Dunnage Bag Length50-300cm
Dunnage Bag Valve ChoiceFast Inflate Valve or Traditional Valve
Valve Size10mm or 30mm two kinds

Loading Tips:
Clean the floor of the trailer and inspect floors, walls and roof for nails or holes before loading.  Remove or hammer down nails or other sharps.
Load skids tight from front to back and from side to side.  Tight means touching.
Use side shifters on the fork lift to position freight in firm contact with the sidewall or other skid of freight.  Also to control void size.
Alternate the void from side to side to balance the load.
Put tallest freight in the nose at the first load position and bag it.
Put the most fragile freight towards the nose for the softest ride.
Use additional bags when necessary to stabilize unsteady skids.
Always bag when dropping from two high to one high loading.
Always bag the final load position.
Techniques for Easy Installation:
Insert inflation tool into valve.
Visually locate the best void to install the bag while walking in.
Give the bag a small puff of air to give it some stiffness and bulk.
Insert bag all the way into the void before inflating. Valve should be at top if possible. One hand should be on the inflation tool and one hand should be positioning the bag.
If bagging a high load position, you may tape the bag to the top of one unit before loading the other side.
When inflating, watch the freight not the bag. 1 - 3 lbs psi recommended. When the freight is tight against the wall, disengage the inflator. Don't worry, the bag will not over-inflate!  Installation is complete when the inflator blows back.
After inflation, screw on over-cap.
Deflation (Patented walk-away feature):
Remove over-cap, push valve in and twist one quarter turn clockwise.
You can walk-away while bag deflates!
Remove bag, inspect for damage and set aside for reuse.

OUR PRODUCTION RANGE

SIZE    (cm)		 MATERIAL(cm)(Mpa) 
050*100 PE/PP+KRAFT250.06≤3.5T
050*150 PE/PP+KRAFT250.06≤3.5T
060*100 PE/PP+KRAFT280.06≤3.5T
060*120 PE/PP+KRAFT280.06≤4.5T
060*150 PE/PP+KRAFT280.06≤4.5T
080*120 PE/PP+KRAFT380.06≤4.5T
080*160 PE/PP+KRAFT380.06≤4.5T
080*180 PE/PP+KRAFT380.06≤4.5T
090*120 PE/PP+KRAFT450.06≤4.5T
090*180 PE/PP+KRAFT450.06≤4.5T
100*120 PE/PP+KRAFT500.06≤4.5T
100*160 PE/PP+KRAFT500.06≤4.5T
100*180 PE/PP+KRAFT500.06≤4.8T
100*200 PE/PP+KRAFT500.06≤4.8T
100*220 PE/PP+KRAFT500.06≤4.8T
100*240 PE/PP+KRAFT500.06≤4.8T
120*120 PE/PP+KRAFT600.06≤4.8T
120*180 PE/PP+KRAFT600.06≤4.8T
120*200 PE/PP+KRAFT600.06≤4.8T
120*220 PE/PP+KRAFT600.06≤4.8T
120*240 PE/PP+KRAFT600.06≤4.8T
Kraft Dunnage Air Bag for Cargo Gap Filling ProtectionKraft Dunnage Air Bag for Cargo Gap Filling ProtectionKraft Dunnage Air Bag for Cargo Gap Filling ProtectionKraft Dunnage Air Bag for Cargo Gap Filling Protection

You Might Also Like