Products

Minrry Trainer for Various Heat Exchangers Educational Equipment Heat Transfer Lab Equipment

China Minrry Trainer for Various Heat Exchangers Educational Equipment Heat Transfer Lab Equipment, Find details about China Fluids Engineering Training Equipment, Fluids Engineering Experiment Equipment from Minrry Trainer for Various Heat Exchangers Educational Equipment Heat Transfer Lab Equipment

Model NO.
MR-WL 315C
Function
Didactic Equipment for University
Purpose
Vocational Training Equipment for University
Fluid Lab Equipment
Educational Equipment for Mechanical Lab
Jacketed Vessel with Stirred and Coil ED
Vocational Training Didactic Teaching Fluids Engin
Trademark
Minrry
Transport Package
Plywood Box
Specification
2 CBM
Origin
China
Model NO.
MR-WL 315C
Function
Didactic Equipment for University
Purpose
Vocational Training Equipment for University
Fluid Lab Equipment
Educational Equipment for Mechanical Lab
Jacketed Vessel with Stirred and Coil ED
Vocational Training Didactic Teaching Fluids Engin
Trademark
Minrry
Transport Package
Plywood Box
Specification
2 CBM
Origin
China
MR-WL 315C Minrry Trainer For Various Heat
Exchangers Educational Equipment Heat Transfer Lab Equipment
Minrry Trainer for Various Heat Exchangers Educational Equipment Heat Transfer Lab Equipment
1. Description
examination and comparison of various heat exchanger types
five different types of heat exchangers included in the scope of delivery
finned heat exchanger with fan
operating mode (parallel flow or counter flow) selectable via valves
flow rates adjustable via valves
electromagnetic flow meter
digital displays for temperature, pressure differences and flow rate
Control Interface Box and Data Acquisition Board part of SCADA system.
Technical Data Base service unit:
Stainless steel tank (30 l), equipped with:
Electric heating element (3000 W) with thermostat (70 °C), to heat the water, computer controlled.
Temperature sensor ("J" type) to measure the water temperature.
Level switch to control the water level in the tank.
Stainless steel cover to avoid the contact with hot water. The cover should have a hole that allows to visualize the water level and also to stuff the tank.
Draining water valve.
Centrifugal pump with speed control from computer, range: 0 - 3 l/min.
Two flow sensors, one for hot water and the other for cold water, range: 0.25 - 6.5 l/min.
Control valves for the cold and hot water.
Four ball valves that, depending on how manipulated, could give co¬current or counter-current flux in the exchanger.
Two ball valves to control and drain the hot water of the base unit. Pressure regulator to avoid the introduction of too much pressure in the exchangers, tared at 0.6 bar.
Four flexible tubes to connect with the different exchangers.
Dimensions: 1100 x 630 x 500 mm approx. (43.3 x 24.8 x 19.68 inches approx.). Weight: 50 kg approx. (110.2 pounds approx.).
Minrry Trainer for Various Heat Exchangers Educational Equipment Heat Transfer Lab EquipmentTen temperature sensors ("J" type)
Shell & Tube Heat Exchanger
Four segmented baffles located transversaly in the shell. Exchange length of the shell and each tube: L = 0.5 m. Internal tube (21 tubes):
Internal diameter: Dint= 8 • 10-3 m.
External diameter: Dext = 10 • 10-3 m.
Thickness = 10-3 m.
Internal heat transfer area: Ah= 0.0126 m2.
External heat transfer area: Ac= 0.0157m2.
Shell:
Internal diameter: Dint,c= 0.148 m.
External diameter: Dext,c= 0.160 m.
Thickness = 6 • 10-3 m.
Seven temperature sensors ("J" type), for measuring cold and hot water temperatures at different points of the exchanger.
Minrry Trainer for Various Heat Exchangers Educational Equipment Heat Transfer Lab EquipmentPlate Heat Exchanger Maximum flow: 12m3/h.
Maximum work pressure: 10 bar.
Maximum work temperature: 100 °C.
Minimum work temperature: 0 °C.
Maximum number of plates: 20.
Internal circuit capacity: 0.176 l.
External circuit capacity: 0.22 l.
Area: 0.32 m2.
Four temperature sensors ("J" type)
Extended Plate Heat Exchanger
Maximum flow: 12 m3/h.
Maximum work pressure: 10 bar.
Maximum work temperature: 100 °C.
Minimum work temperature: 0 °C.
Maximum number of plates: 20.
Internal circuit capacity: 0.176 l.
External circuit capacity: 0.22 l.
Area: 0.32 m2.

Service
We supply supply7*24 hours service, customer design service, OEM service, buyer label service. With professional engineers team and sales team, we assure you good product quality.
Certificate
Our products takes ISO9001 product management system.
No.Feature NameDetails
1Customer designYes
2Warranty1 year, 2 years, 3 years or 5 years according to client requirements
3PackagePlastic film+ carton+ Fine plywood
4Products standardInternational didactic equipment standard
5Application rangeEducational equipment for university, college, vocational training centers
6Company philosophySupply best quality Chinese products to the worldwide schools.
7Self owned brandMinrry,MR
8Production timeFrom 10 days to 60 days according to different items


We also have below equipment, please click the link to see it



 

You Might Also Like