Aluminum Alloy Sheets for Closures
Aluminium closure sheet is used for the bottle cap market. Using a unique rolling technology, Haomei supplies aluminium sheets ideally suited to manufacture the caps for long neck wine bottles, extremely deep drawn and decorated closures, plus a range of pilfer proof caps for beverage bottles, soft drink, juice, isotonic beverage, energy beverage, and other products, such as the 30x60 mm specifications are often used in the wine and spirits segment.
8011 aluminium alloy is a wrought alloy.and it is otherwise unclassified series. Due to 8011 aluminum alloy contains Al-Fe-Si and other chemical elements, 8011 aluminium plate has a lot of alloy advantages.

Specification
1) Width and length: Cut as per customer's requirement
2)Thickness: 0.18-0.3mm
3) Alloy: 8011
4) Temper: H14 H16
5) Color: Various colors are available as per customer's requirement
6) Packaging detail: Wooden box or plastic wrap




Aluminum alloy 3105 plate sheet is essentially a 98% aluminum alloy with minor additions to increase strength over that of alloy 1100 and 3003, It is not hardenable by heat treatment and it has good corrosion resistance, formability and wedability.
Alloy: 3105
Temper: O, H111, H112, H12,H14, H16, H18, H22, H24, H26
Thickness: 0.2mm--200mm
With: 500mm--2000mm
Length: 1000mm--12000mm
Surface: Mill finish, Bright finish, paper interleaved, one side film, both sides film.


 

Specifications

Chemical Compostions

Mechanical Property

Mechanical Property for Direct Casting

Application of 3105 8011 Color Printed Aluminum Sheets

vial aluminium seals,aluminium tear off seal,aluminium flip-off vial seals, aluminium closures, pharmaceutical caps, pull-off aluminum cap, aluminum seal cap for injection vial,aluminum cap for injection bottle. ROPP cap, PP cap, roll on pilfer proof cap, aluminum pilfer-proof cap, pilfer proof closure, aluminum bottle cap, aluminum screw cap, tear off caps, flip off  caps.





Packing
Sheet: Sheets are placed in wooden boxes on wooden skids with runners along the length of the sheet. They are wrapped in HDPE with hardboard on top and bottom of the stack. Hoop iron strapping runs along the length of the sheets. Silica gel packets are put in the boxes for moisture protection.




 

The supplierof choice - Haomei Aluminium

Haomei 3105 8011 Aluminium closure sheet Aluminum Printed Sheets are suitable for both transparent and non-transparent lacquering, and will not bend during curing process. For applications requiring deep drawing, such as long caps, Haomei aluminium closure sheets show very low earing, greatly reducing scrap rate for our clients.
Haomei Aluminum closure sheet is rolled to very fine tolerances to yield more closure per tonne of stock and to allow uninterrupted operation of high-speed, multiple-cavity presses. Its strength, high formability, low earring and printable surfaces make it ideal for pilfer-proof caps and vial seals.