Custom Metal Fabrication Welding Service Marine Hardware

China Custom Metal Fabrication Welding Service Marine Hardware, Find details about China Marine Hardware, Anchor from Custom Metal Fabrication Welding Service Marine Hardware

Dimensions
Drawing Requirements
Trademark
Dana
Transport Package
Carton + Wooden Pallet
Origin
China
Dimensions
Drawing Requirements
Trademark
Dana
Transport Package
Carton + Wooden Pallet
Origin
China
Custom Metal Fabrication Welding Service Marine Hardware
Custom Metal Fabrication Welding Service Marine Hardware
The way the claw is formed makes it very well fixed and very consistent, and it should adjust itself when it drops to the bottom. Even after major changes in wind power, its reliability has a reputation. They are suitable for semi-hard sand and rock bottoms and some muddy conditions.
Stainless steel claw anchors are not only impeccable, they also look great. It is made of sturdy, highly polished 316 stainless steel, which is the ultimate in strength and appearance. Compared to galvanized steel, it shines in the sun and is also more resistant to corrosion.
The solid, one piece design, results in superior holding power than other similar plow anchors like the CQR and sets easily in most bottoms including mud, sand, rock, and more. This Delta anchor is constructed from solid stainless steel and will sparkle on the bow of any boat. Having a high holding power to weight ratio, boaters often need a lighter Wing/Delta anchor than may be necessary in other styles of anchors. For example, for most 25' boats, a 13 lbs Wing/Delta anchor will be an adequate anchor choice.
Custom Metal Fabrication Welding Service Marine Hardware
Custom Metal Fabrication Welding Service Marine Hardware
Stainless Steel Fluke anchors combine all the legendary features of the Danforth anchor along with a spectacular highly polished, 316 stainless steel finish. The result is high-performance, beautiful anchor. With one of Norestar's stainless steel anchors, you'll have the best looking anchor on the dock.

The fluke style anchor is one of the most popular anchors among boaters. In mud, sand, and gravel it has one of the highest weight-to-holding power ratios of any anchor. The fluke anchor features a tapered shank and chamfered edges that allow for deep seabed penetration in sand and mud. It stores easily in a storage locker or on a bow roller.
The hinged design, which can rotate over 70 degrees in any one direction, means that it is more responsive to wind and tide changes, making it less likely to unset. This Norestar Hinged Plow Anchor is constructed from solid stainless steel and will sparkle on the bow of any boat.

The hinged plow performs well in most bottom conditions  including mud, rock, and grass. Each anchor includes a trip line at the back of the anchor to allow for easier breakout. It stores easily on most bow rollers (and often interchangeably with a Delta anchor of the same size).

The Plow/CQR anchor is perhaps one of the most polarizing anchors  available. While some are quick to curse it, often citing poor performance in comparative  testing, the fact remains that many boaters swear by it above any other anchor. for well over it 70 years, it has proven itself in some of the most daunting conditions.
Custom Metal Fabrication Welding Service Marine Hardware
Custom Metal Fabrication Welding Service Marine Hardware
FOLDING GRAPNEL ANCHOR
Fold Up Grapnel Anchor design offers great performance and can also be stowed easily on your vessel.
Its compact design makes it ideal for small boats, tenders, RIBs, dinghies, kayaks, and jet-skis
 
Please following :
0.7KG/1.5KG/2.5KG/3.2KG/4KG/5KG/6KG/7KG/8KG/10KG/12KG
Good stability, easy to receive and throw Especially, it is widely used in dredger Our unique design makes it stronger, You can choose to weld the shackle or not
At present, we can start from 12kg / 20kg / 25kg / 30kg Up to 180kg
Custom Metal Fabrication Welding Service Marine Hardware
Custom Metal Fabrication Welding Service Marine HardwareCustom Metal Fabrication Welding Service Marine HardwareCustom Metal Fabrication Welding Service Marine HardwareCustom Metal Fabrication Welding Service Marine Hardware
Packaging & Shipping
 

 

Custom Metal Fabrication Welding Service Marine Hardware

FAQ

Q1. Are you a manufacturer or a trading company?

A1. We are a professional manufacturer with rich export experience in designing and producing metal castings.

Q2. What is your minimum order quantity?

A2. According to your requirements, it is usually 1000. We accept small amounts.

Q3. What is the delivery time of the samples?

A3. Depending on the sample, it is usually 25 to 35 days.

Q4. What is the thinnest wall thickness you can cast?

A4. Through special technology, such as ceramic core/soluble wax, we can cast the wall thickness between 0.5-0.8mm.

Q5. What is the weight range you drop?

A5. We can project the weight from 0.001kg to infinity