Best-Selling Polypropylene PP Injection Grade/ Blowing Grade / Film Grande PP Resin Available
China Best-Selling Polypropylene PP Injection Grade/ Blowing Grade / Film Grande PP Resin Available, Find details about China PP Granules, Plastic Products from Best-Selling Polypropylene PP Injection Grade/ Blowing Grade / Film Grande PP Resin Available
Basic Info.
Model NO.
PP
Trademark
Atrust
Transport Package
25kg Bag
Specification
Customized
Origin
China
HS Code
3902100090
Model NO.
PP
Trademark
Atrust
Transport Package
25kg Bag
Specification
Customized
Origin
China
HS Code
3902100090
Product Desciption
1.Product Description:
Polypropylene
HS Code:3902100090
Polypropylene is a polymer formed by addition polymerization of propylene. It is a white waxy material with a transparent and light appearance. The chemical formula is (C3H6)n, the density is 0.89~0.91g/cm3, It is flammable, with a melting point of 189ºC, softening at about 155ºC, and the use temperature range is -30~140ºC . It is resistant to corrosion by acids, alkalis, salt solutions and a variety of organic solvents below 80°C, and can be decomposed under high temperature and oxidation.
PP Features
1. The relative density is small, only 0.89-0.91, which is one of the lightest varieties in plastics.
2. good mechanical properties, in addition to impact resistance, other mechanical properties are better than polyethylene, molding processing performance is good.
3. It has high heat resistance and the continuous use temperature can reach 110-120 °C.
4.good chemical properties, almost no water absorption, and does not react with most chemicals.
5. the texture is pure, non-toxic.
6. electrical insulation is good.
2.Specification:
3.Application:
1.Fiber ( Carpet, Textiles, Upholstery, etc.)
2.Film ( shopping bags, casting film, multilayer film, etc.)
3.Blow Molding ( Medical & Cosmetic container, Lubricant & Paint container, etc)
4.Extrusion Molding ( Sheet, Pipe, Wire & Cable, etc.)
5.Injection Molding ( Automotive, Electronic, Construction, House wares, Furniture,
Toys, etc.)
4.Packaging Details:
25kg/ carton or 25kg/bag, or per your requirement
25kgs net weight in PP woven or PE plastic bag about 20 tons for 20" container
PolypropyleneHS Code:3902100090
Polypropylene is a polymer formed by addition polymerization of propylene. It is a white waxy material with a transparent and light appearance. The chemical formula is (C3H6)n, the density is 0.89~0.91g/cm3, It is flammable, with a melting point of 189ºC, softening at about 155ºC, and the use temperature range is -30~140ºC . It is resistant to corrosion by acids, alkalis, salt solutions and a variety of organic solvents below 80°C, and can be decomposed under high temperature and oxidation.
PP Features
1. The relative density is small, only 0.89-0.91, which is one of the lightest varieties in plastics.
2. good mechanical properties, in addition to impact resistance, other mechanical properties are better than polyethylene, molding processing performance is good.
3. It has high heat resistance and the continuous use temperature can reach 110-120 °C.
4.good chemical properties, almost no water absorption, and does not react with most chemicals.
5. the texture is pure, non-toxic.
6. electrical insulation is good.
2.Specification:
| Number | Project | Unit | H40S | Test value | Test Methods | |
| 1 | Melt mass-flow rate(MFR) | Nominal value | g/10min | 37 | 37.3 | GB/T 3862 |
| Deviation | ±37 | |||||
| 2 | Isotactic index | % | >=96.0 | 97.51 | GB/T 2412 | |
| 3 | Particle appearance | Color grain | Pc/kg | <=5 | 0 | SH/T 1541-2006 |
| Black grain | Pc/kg | 0 | 0 | |||
| Large and small grains | g/kg | <=100 | 0.1 | |||
| Snake skin grains and trailing grains | Pc/kg | report | 25 | |||
| 4 | Impurities and others | Pc/kg | no | no | SH/T 1541-2006 | |
| 5 | Ash | % | <=0.030 | 0.014 | GB/T 9345.1 | |
| 6 | Tensile properties | Tensile modulus of elasticity(Et) | MPa | >=1200 | 1250 | GB/T 1040 |
| Tensile yield stress(σ y) | MPa | >=30.0 | 30.9 | |||
| Tensile stress atbreak(σ B) | MPa | >=8.0 | 20.7 | |||
| Nominal tensile strain at break(ε tB) | % | >=200 | 566 | |||
| Test conclusion | Qualified | |||||
1.Fiber ( Carpet, Textiles, Upholstery, etc.)
2.Film ( shopping bags, casting film, multilayer film, etc.)
3.Blow Molding ( Medical & Cosmetic container, Lubricant & Paint container, etc)
4.Extrusion Molding ( Sheet, Pipe, Wire & Cable, etc.)
5.Injection Molding ( Automotive, Electronic, Construction, House wares, Furniture,
Toys, etc.)
4.Packaging Details:
25kg/ carton or 25kg/bag, or per your requirement
25kgs net weight in PP woven or PE plastic bag about 20 tons for 20" container
You Might Also Like
Triac 0-10V Dali Dimmable Recessed LED Downlight/ COB LED Ce......
GMP Factory Supply Food Grade Phycocyanin Spirulina Extract
Table Tennis Racket with Rubber + Bag Ping Pong Bat
3mh Cool Giant Fat Inflatable Cat Cartoon for Advertising
Mslfp14 17*17 Wired Box Size X-ray Digital Flat Panel Detect......
Portable Glass Shape Edge Polishing Machine
A4 A3 Paper Wrapping Machine
Stainless Steel Angle Tube Strainer
Sinchold 9220/20/45 Forged Steel Welded Crane Rail Clips
Warehouse Tent Made by Superb Tent
Thyristor Rectified CO2 MIG Mag Arc Welding Machine