Product Description

Modular cold room is equipped with PU panel and high quality monoblock refrigeration unit. The PU panel with 42 kg/m3 density, at least 0.5 mm Baosteel two sides color plate, so the cold room can keep 20 years lifetime. The monoblock unit with original new Danfoss and Embraco compressor, 95% components imported from EU, like Dixell thermostat, Italy castle and so on. Modular cold room is very easy to install. You can assemble by yourself. Zero installation cost! 

Cold room installation is easy

Each panels will be marked with unique number and with zinc-coated cam lock, you just need to use an allen key and lock different panels together. Then seal them with silicon, it's done!

Monoblock refrigeration unit installation is easy!

The hole is pre-cut on wall panel before delivery. After you assemble the PU panel, you just need to mount the monoblock unit onto it and connect it to power.

Ventilation air will be release to outdoor

If your warehouse is very limited and ventilation is not good, like kitchen, we will add the centrifugal fan for monoblock unit; it can transfer the heat to outside and keep monoblock unit work normally.

Successful case

Outdoor cold room

Customer info: These cold rooms are for a farmer. He put the cold room on trailers and sell the meat in bazaar. He put the cold room outdoor to store fresh meat for few days.
Order info:
Monoblock refrigeration units with single phase power 230V
Modular cold room, sizes 1.8x2x2.2m, 2x2x2.4m, etc

FAQ

Is there oversea service for installation?

No. The cold room is easy to install. No need to do this. You can install by yourself within 3 hours, need to lock the PU panels and mounted monoblock. We also have the engineer to guide you on line and the on line installation video.

How you pack the panels to avoid the damage?

Our standard package: Plastic film package can protect the PU panels well, hard to tear.
FCL: plastic film package; LCL: plastic film package with wooden pallet.
Besides, we can also do the wooden packing if you need.

How to calculate the electricity power of cold room?

If you use monoblock unit, the electricity power = input x hours
If you use split system, the electricity power = (Condensing unit input + evaporator input) x hours
In summer, hour is 18 hours. In winter, hour is 12 hours

Factory Introduction

To ensure the monoblock high efficiency and long lifetime, we adopt European management, strict on each procedure of the production and inspection. Besides, with Spanish partner's support from both technology and experience, now our monoblock quality is top level in China.

We're the only one manufacturer in China who has two continuous PIR automated lines, one from German, the other from Italy. Annual output up to 2,800,000 sqm panel, 10,000 units cold room doors. We can ensure our panels lifetime 20 years at least. 



Package