Wholesale Modular Wall Panels for Mobile House/Prefabricated House
 

Introduction of Wall Panels 

Wall panels are structured insulated panels used as construction materials. Basically, they are three layered sandwich panels; a low density insulating core (cement) is sandwiched between relatively two hardened skin layers of structured board on each side of the core. Front board can be calcium silicate board (thickness : 5mm). These structural combinations are best fit for environments where low weight and high structural rigidity is desirable.
They are manufactured by amalgamating styrene with isobutylene under high pressure. Tiny beads of polystyrene are fused within the dense core using steam heating process and pressure treatments. Upon heating, these beads are expanded as much as up to 40 times. Once the fusion takes place, the blocks are then segmented and shaped to deliver a variety of EPS products into the market.

Strength of Wall Panels
Economic benefits of composite sandwich panel:

1. A building area of about 110 square meters is required for every 100 square meters of building area. The weight of light energy-saving wall panels and red brick walls can reduce about 25 tons, and a building of 20,000 square meters can reduce about 5,000 tons, which can reduce the housing foundation. , Beams, columns, a lot of steel, cement.

2. The sandwich panel is similar to other walls in terms of unilateral cost, but it is very cheap in terms of increasing area, reducing transportation volume, reducing labor intensity, saving building structure costs, and civilized construction.
 

Application of EPS Sandwich Panel

--condominium
--townhouse
--hospital
--clinic
--real estate
--prefabricated house

Contact Freda
Freda Lin
Xiamen ZhongJingTai Building Materials Co,. Ltd
Website: http://zjteps.en.made-in-china.com