5mm 2mm Thickness 2014 2021 2024 T3 Aluminum Sheet Plate

China 5mm 2mm Thickness 2014 2017 2024 T3 Aluminum Sheet Plate, Find details about China Aluminum Sheet Plate, Aluminum Sheet from 5mm 2mm Thickness 2014 2017 2024 T3 Aluminum Sheet Plate

Basic Info.

Model NO.

2017

Alloy

Thickness

0.1mm to 400mm

Width

1000mm to 2200mm

Length

up to 6 Meters

Tolerance

+/-0.02mm

Mtc

En 10204/3.1

Standard

ASTM B209, ISO 6361, En573-1 etc.

Keyword

2017 Aluminum Alloy Sheet

Trademark

ZYTC

Transport Package

as Customer′s Requirement

Origin

China

HS Code

76042990

Model NO.

2017

Alloy

Thickness

0.1mm to 400mm

Width

1000mm to 2200mm

Length

up to 6 Meters

Tolerance

+/-0.02mm

Mtc

En 10204/3.1

Standard

ASTM B209, ISO 6361, En573-1 etc.

Keyword

2017 Aluminum Alloy Sheet

Trademark

ZYTC

Transport Package

as Customer′s Requirement

Origin

China

HS Code

76042990

Product Desciption

1: Brief Introduction Of 2017 aluminum
Aluminium/aluminum 2017 alloy is a heat treatable wrought alloy with intermediate strength. It is stronger than aluminium
/aluminum 2011, but harder to machine. Workability is fair with ductility and formability better that aluminium / aluminum
2014. Arc and resistance weldability of this alloy are satisfactory while corrosion resistance is fair.
Machinability and formability:
Aluminium / aluminum 2017 alloy has excellent machinability in the T4 temper. It is recommended that oil lubricants be
used for all machining operations. Likewise formability is excellent especially in the annealed condition.
Welding:
Welding tends to reduce corrosion resistance, hence should be avoided whenever possible. If welding is required, heat
treatment should be performed after welding to restore corrosion resistance. The preferable welding techniques are inert
gas welding and resistance welding.
Annealing:
Aluminium / aluminum 2017 alloy can be solution annealed at 504°C (940°F) for 3-4h followed by water quenching. Age
hardening is performed at room temperature and this produces the T4 temper. Cold working such as shaping and bending,
can be easily performed by using traditional methods. Annealing can be performed at 413°C (775°F) for 3 h and then
controlled cooling at 10°C (50°F)/h down to 260°C (500° F). Finally it can be air cooled.
Aging:
Aluminium / aluminum 2017 alloy ages normally at room temperature to produce optimum mechanical properties.
Similarily, it is age hardenable at room temperature.
Applications:
Aluminium / aluminum 2017 alloy is chiefly used in the following products:
Screw machine products and fittings
Pulleys and gauges
Coat hangers
Crochet and knitting needles
Rivets
General structural components
Components in transportation sector
Fasteners
Aircraft components.
2: Chemical Composition

Aluminum Grades:
1000 series: 1035,1040,1050,1060,1070,1080,1090,1098,1100,1230,1435,1260,1170,1275,1285,1385
2000 series: 2001,2002,2011,2014,2017,2117,2218,2519,2024,2224,2025,2030,2031,2036,2090,2091
3000 series: 3002,3003,3004,3103,3203,3303,3105,3006,3007,3107,3008,3009,3015,3016
5000 series: 5005,5205,5006,5010,5013,5014,5016,5017,5040,5043,5050,5150,5251,5351,5451,5052,5083
5352,5552,5254,5754,5856,5456,5283
6000 series: 6101,6201,6003,6103,6105,6205,6006,6106,6110,6061,6060,6063,6863,6081,6082,6162,6863
7000 series: 7001,7003,7005,7108,7129,7146,7050,7472,7075,7076,7277,7178,7278,7091,7277
8000 series: 8001,8004,8006,8011,8111,8014,8030,8130,8177,8079,8081,8280,8091

Aluminum Temper:
O,H12,H13,H14,H16,H18,H24,H32,H34,H19,H38,G36,F,H111,H112,H192,H392,H393,H321
T1,T3,T4,T8,T72,T451,T42,T62,T5,T6,T36,T351,T651,T851,T3511,T913,T94,T7351,T89,T4510,T6510,T8510,T8511,
T4511,T52,T5511,T6511,T54,T73

The aluminum industry has created a system using a four-digit numerical designation to identify wrought aluminum alloys.
The first digit indicates the major alloying element.  The second digit indicates whether there was a modification in the basic
alloy.  The third and fourth digit indicates the specific alloy.  The following represent the various groups:

1XXX	Aluminum 99% or greater
2XXX	Copper - major alloying element
3XXX	Manganese - major alloying element
5XXX	Magnesium - major alloying element
6XXX	Magnesium and silicon - major alloying elements
7XXX	Zinc -major alloying element