Products

Nc Servo Feeder 3 in 1 Uncoiler Straightener Feeder Machine for Punching Machine and Progressive Die

China Nc Servo Feeder 3 in 1 Uncoiler Straightener Feeder Machine for Punching Machine and Progressive Die, Find details about China Turkey Project, Uncoiler Straightener from Nc Servo Feeder 3 in 1 Uncoiler Straightener Feeder Machine for Punching Machine and Progressive Die

Model NO.
NC300
Power Source
Pneumatic
Precision
High Precision
Certification
CE, ISO 9001
Condition
New
Trademark
KINGLAN
Transport Package
Standard Export Package
Origin
Wuyi, Zhejiang
HS Code
84624119
Model NO.
NC300
Power Source
Pneumatic
Precision
High Precision
Certification
CE, ISO 9001
Condition
New
Trademark
KINGLAN
Transport Package
Standard Export Package
Origin
Wuyi, Zhejiang
HS Code
84624119
KINGLAN GROUP automatic feeder for power press machine 

0.5mm to 6mm Stainless Steel Strips/Coil 3 in 1 Uncoiler Straightener Feeder machine for punching machine and progressive die

Nc Servo Feeder 3 in 1 Uncoiler Straightener Feeder Machine for Punching Machine and Progressive Die
 
Power press connect 3 in1 uncoiler feeder leveler metal coil feeding machinery and tools
 
Decoiler
Function instruction: uncoiling is to fix coil on the spindle of uncoiler, a supporting table to support coil Inner diameter,
while working automatically, through material loop controlling instruction to make spindle uncoiling and loosing coil
intermittently, equipped with coil diameter detection, to control uncoiling speed, ensure uncoiling line speed is uniform
velocity, improved material loosing problem.

Components included: expansion and contraction part, press arm part, limit wheel part, material loop controlling part.

Expansion method: hydraulic expansion.
Spindle expansion range: Φ450-Φ530mm.
Spindle driven motor: AC motor, with inverter.

Spindle driven method: variable frequency gear motor.
Spindle brake: disc brake.
Spindle uncoiling direction: down uncoiling.
Press material wheel specification: PU rubber tires
Press material wheel driven method: AC motor, with inverter

Function of press arm: from cut off bundling belt which is used for fixing coil until the coil head is pressed tightly by
straightener roller, to prevent coil rebounding; while whole feeding line working, let the coil uncoiling smoothly, to prevent
coil dispersing and the press arm is motorized, with tracking and follow up function ie. Rotating speed of press arm roller is
absolutely the same with uncoiling line speed, then tensioning metal strip, to prevent coil loosing.
It adopt 3 in 1 uncoiler straightener feeder+3D transfer system+transfer mould+Gantry type power press. Fully automatic. Straightener part adopted electric adjust straightening roller gap, decoiler part adopt hydraulic tailstock arm device to support one end of decoiler's mandrel.

Material yield strength comes 700MPa(700N/mm²).
SPECIFICATIONS FOR NCHW2-1300A AUTOMATIVE FEEDER FOR POWER PRESS
 
Material main parameters
Material width range
mm
70-1300
Material thickness range
mm
0.5-4.5
Coil weight
T
10
 
Main performance parameters
Feeding speed
m/min
22
Feeding length
mm
0-9999
flatening tolerance
mm
±0.15
 
Driving and controlling system
Feeding servo motor
KW
15.0
Uncoiler use main motor
KW
5.5
Coil car use motor
KW
2set*1.5
 

Straightener Feeder
Function instruction: use unbending principle to release material bending stress to straighten plate, then feed into press
equipment according to set length and speed.
Driven method: AC servo motor
Straightening-feeding roller combination: straightening roller; assistant roller; feeding roller.
Straightening measure display method: dial display.
Straightning roller release method: pneumatic release.
Straightening measure adjusting method: manually by hand wheel (Electrically Adjust for optional)
Straightening measure adjusting method: electrically adjust (for optional), no need rotate the hand wheel, more precise, with
date storing function to store each group of material of straightening adjustment date which can save time for future using,
convenient for operation.

Roller driven method: gear driving, all gears adopt tempering, carburization, high frequency quenching, precise grinding gear
IT6 level precise standard.

Straightening-feeding rollers flip up system (for optional): upper straightening-feeding rollers can be lifted by hydraulic
cylinder from one side, lifting angle can reach up to 30 degree. Through operating touch screen HMI or button of hand operating
box to open straightening-feeding rollers, by this way, easy for clear rollers, to ensure material surface flatness and
cleanliness. Adopts double oil cylinder to control.
Nc Servo Feeder 3 in 1 Uncoiler Straightener Feeder Machine for Punching Machine and Progressive Die

Main accessories

1. For decoiler part:
1) Motorized press arm device, holding strips firmly when released by the decoiler, preventing coil too loose. Moreover, it equip with coil loop tracking device, press arm wheel running speed can adjust automatically according to coil O.D. varies, ensure coil payoff strips smoothly.

2) Limit arm device, Limit arm device was used to clamp coil in width direction at left and right part, prevening coil move inside or outside.

3) Uncoiler inverter device. With inverter, the decoiler's rolling speed is adjustable, further more, under protect of the inverter, the decoiler has much longer life time.
4) Electric eye loop control system, controlling the decoiler to release strips automatically. When strips touch the light sent out by the device, the decoiler will stop to work, on the contrary, when the strips left the light, machine will start to work again.
5) Mandrel's support plate equip with Intersection type junction plates. It can well prevent strip end insert into decoiler's mandrel plates gap which may influence total line's running. 
6) Pneumatic disc brakes device. It was used to brake main shaft, stable and stop rolling smoothly.
7) Hydraulic tailstock arm device. It was used to support one end of decoiler's mandrel shaft, enhancing decoiler has enough loading capacity. So Loading capacity can be above 10T.
 
2. Straightening feeding part:
(1) Electric adjust straightening roller gap, It was driven by 2 set servo motor+worm-gear box, just need to put in set gap data in HMI, it can adjust straightener roller gap automatically, easy to opearte, having high adjustment accuracy.
 
(2) Feeding and straigtening rollers adopted Gr15, and all rollers finished heat treated, hard chrome plated, ground etc, hardness comes 60°-62°
 
(3) Servo motor+speed reducer to drive lower feeding roller, meanwhile feeding roller drive straightening rollers via gear sets. This structure is more powerful than normal power transmission via 2 set synchronous belts.
 
(4) Motorized bend arm device. It was mainly used to guide and press strip head down to insert strip head into straightening roller easily and smoothly. The tip of the coil maybe exist curved upward, after strips were guided to the entrance of the straightener feeder part, with the coil tip flatness device, it can press the tip and making the strips entering the feeding rollers easily.
 
(5) Full sets of SIEMENS servo drive and control system, full sets of Schneider low voltage components etc.
 
3. Coil car
It was used to load, carry and lift coil then install coil on decoiler's mandrel automaticaly. Moreover, this coil car's two support rollers are motorized which was driven by hydraulic motor, so that it can assist strip head inserting straightening part smoothly.
 
4. Main optional part.
(1) Hydraulic shear. It's used to cut coil's scrap part, such as coil head and end.
(2) Oil feeder. It was used to roll and paint lubrication oil on strip's one side or two side automatically.
(3) Safty fence. It was used to protect coil feed system in fence, prevening human enter machine's working area, in case occuring hurt human. Machine can stop in emergent in case human open fence's any part
Profession and Innovation
KINGLAN, a professional stamping automation equipment manufacturer, is a collection of designs, research & development, productions and after-sales services, located in Dongguan China. Our products have been widely applied in automotive, appliances, furniture, cookware, hardware products and other industries. Extensive experience in manufacture and world-wide commercial cooperation allows us to provide you with high-quality equipment and first-class service.

The wide range of automatic equipment that we supply including 3 in 1 decoiler straightener feeder, 2 in 1 decoiler straightener, decoiler, coil straightener, press feeder, coil blanking line as well as all kinds of press transfer including 2D transfer, 3D transfer, single bar transfer and long beam transfer between multi-press etc.

KINGLAN has been consistently providing industry-leading products for 10 years. We are honored to have earned preferred-vendor status with many of the leading auto parts suppliers for Volkswagen, Toyota, Hyundai, Geely, Yutong Bus, IKEA and more. Growing demand for high productivity and quality in manufacturing industry urges us continue to improve R&D ability and machines performance.

KINGLAN is active in global markets with the permit for import and export. We have run lots of successful projects with local manufacturers in The Czech Republic, Italy, Portugal, Ireland, Spain, Canada, Mexico, South Africa, as well as Asian markets, such as South Korea, Malaysia, Indonesia, and India.

It is our principle to supply superior products and excellent services. The international teams provide you with professional, swift and convenient services. HAIWEI aims to supply superior products and excellent services to create value for customers on the basis of integrity, innovation, and win-win cooperation. No matter what you inquire, we are ready to offer the best solution for you!
WHY MORE FACTORIES CHOOSE HAIWEI EQUIPMENT
Extensive Experience KINGLAN has been active in global markets for over 10 years with the permit for import and export. We have run lots of successful production lines with worldwide manufacturers. The experience we accumulate and the challenge we fight off give the confidence to provide satisfactory solutions.

One-stop Service From design to after-sale service, KINGLAN sticks to customer-centric principle. Technical support is consistently provided during the whole machines lifetime. Not only can we manufacture high-performance equipment, but we have the capability to design and product the whole automatic production line.

Specific Solution There are electrical engineers, mechanical engineers and software engineers in our team. Using advanced engineering software and tools, our engineers can analyze your application and provide a custom specific solution to meet every unique need. During long-standing research and development, KINGLAN creates a wide variety of technical solutions, such as high-speed design, space-saving design and multi-language operating system

Dependable Quality KINGLAN continues to control the entire supply chain and quality from raw material to machines assembly. All machines are certified with European CE. Less maintenance and purchase cost help you maximize efficiency and profits. 
Nc Servo Feeder 3 in 1 Uncoiler Straightener Feeder Machine for Punching Machine and Progressive Die
Nc Servo Feeder 3 in 1 Uncoiler Straightener Feeder Machine for Punching Machine and Progressive Die
Stamping Whole Line Solution /Turkey project
Nc Servo Feeder 3 in 1 Uncoiler Straightener Feeder Machine for Punching Machine and Progressive DieNc Servo Feeder 3 in 1 Uncoiler Straightener Feeder Machine for Punching Machine and Progressive DieCustomer factories
Nc Servo Feeder 3 in 1 Uncoiler Straightener Feeder Machine for Punching Machine and Progressive DieNc Servo Feeder 3 in 1 Uncoiler Straightener Feeder Machine for Punching Machine and Progressive Die
Cooperation partner
Nc Servo Feeder 3 in 1 Uncoiler Straightener Feeder Machine for Punching Machine and Progressive Die
Cuntact US
Nc Servo Feeder 3 in 1 Uncoiler Straightener Feeder Machine for Punching Machine and Progressive Die

FAQ
Q: Are you a factory or trading company?
A: We are a factory which has been producing stamping machines for more than 35 years.

Q: What are your main products?

A: We specialize in manufacturing press machine, decoiler straightener and feeder, metal stamping die, transfer arms etc. ie, we
mainly help customers contract to build the whole stamping line projects.

Q: What's the delivery time?
A: The standard machine is 25 to 30 days after payment. If asked to supply whole production line by our customer, we will confirm
the delivery time based on the specific project itself.

Q: What's your payment term?
A: we advise 30% T/T deposit, balance paid before shipment.

Q: Do you receive OEM?
A: Yes, we warmly welcome customers to do OEM in our factory.
Semi-Automatic PET Bottle Blowing Machine Bottle Making Machine Bottle Moulding Machine PET Bottle Making Machine is suitable for producing PET plastic containers and bottles in all shapes.
 

You Might Also Like