China DN50 Water Dam Wasted Water Treatment Farm Water Applied Ultrasonic Flow Meter TUF2000, Find details about China FLOW METER, electromagnetic flow meter from DN50 Water Dam Wasted Water Treatment Farm Water Applied Ultrasonic Flow Meter TUF2000
Measuring principle: Travel-time-difference method;
Accuracy: linearity is better than ±0.5%;
Repeatability: better than ±0.2%;
Measurement accuracy: better than ±1%;
Measurement period: 500ms;
Flow rate range: 0m/s to 30m/s;
Measurable medium: water, sewage, sea water, chemical solution, oil, alcohol, etc.
Turbidity: ≤ 10000 ppm, and the bubble content is small;
Specification
Measuring principle: Travel-time-difference method;
Accuracy: linearity is better than ±0.5%;
Repeatability: better than ±0.2%;
Measurement accuracy: better than ±1%;
Measurement period: 500ms;
Flow rate range: 0m/s to 30m/s;
Measurable medium: water, sewage, sea water, chemical solution, oil, alcohol, etc.
Turbidity: ≤ 10000 ppm, and the bubble content is small;
Pipe type: steel, cast iron, cement, hard plastic, fiberglass, PVC, etc.
Pipe diameter range: different diameters from DN32mm to DN1500mm;
Straight pipe section: upstream ≥10D, downstream ≥5D, ≥30D from the pump outlet;
Fluid temperature: standard probe: -30° C~90° C;
High temperature probe: -30° C~160° C;
Protection level: sensor up to IP68, converter IP65;
Language: Chinese/English switchable;
Working power supply: 100V~ 40V AC, 8V~36V DC;
Output signal: 4mA~20mA DC or 0mA~20mA DC, etc.
Frequency signal: 1Hz~9999Hz optional, OCT output;
Alarm signal: dual OCT output, 20 sources optional;
Data interface: isolated RS485 serial interface, support MODBUS protocol;
Converter Types (Optional)
Order Guide
TUF2000 | Ultrasonic Flowmeter | ||||||||||||||||||||
|
| Code | Flowmeter Type | ||||||||||||||||||
SW | wall-mounted | ||||||||||||||||||||
SS | Panel-mounted | ||||||||||||||||||||
SD | Explosion-proof | ||||||||||||||||||||
|
| Code | Sensor Type | ||||||||||||||||||
B1 | TS-2, standard small size, magnetic, DN32~DN65,-30ºC~90ºC | ||||||||||||||||||||
B2 | TM-1, standard medium size, magnetic, DN80~DN400,-30ºC~90ºC | ||||||||||||||||||||
B3 | TL-1,standard large size, magnetic, DN450~DN1500,-30ºC~90ºC | ||||||||||||||||||||
B4 | HTS-1 high-temp small size, DN32~DN65,-40ºC~160ºC | ||||||||||||||||||||
B5 | HTM-1 high-temp medium size, DN80~DN400,-40ºC~160ºC | ||||||||||||||||||||
B6 | HTL-1 high-temp large size, DN450~DN1000,-40ºC~160ºC | ||||||||||||||||||||
C1 | TC-1 standard insertion-type, DN80~DN1200,-40ºC~160ºC | ||||||||||||||||||||
C2 | TLC-2 extended insertion-type, DN80~DN1800,-40ºC~160ºC | ||||||||||||||||||||
|
| NominalDiameter (mm) | XXX [ represent actual diameter, for examples, DN50~050; DN100~100] | ||||||||||||||||||
|
| Code | Pipeline Material | ||||||||||||||||||
0 | Carbon Steel | ||||||||||||||||||||
1 | Stainless Steel (not including 316/316L) | ||||||||||||||||||||
2 | Cast Iron | ||||||||||||||||||||
3 | Glass Steel | ||||||||||||||||||||
4 | PVC | ||||||||||||||||||||
5 | Cement | ||||||||||||||||||||
6 | Others | ||||||||||||||||||||
|
| Pressure | MPa(default<=1.6MPa) | ||||||||||||||||||
|
|
|
| Code | Output signal |
| |||||||||||||||
E | 4mA~20mA DC(standard) |
| |||||||||||||||||||
F | Frequency (upper and lower limit and range required) |
| |||||||||||||||||||
R | Relay Output(Switch contact signal) |
| |||||||||||||||||||
R2 | RS232(Please note baud rate and communication check bit) |
| |||||||||||||||||||
R8 | RS485 output, standard Modbus protocol(standard) |
| |||||||||||||||||||
|
| Code | Supply |
| |||||||||||||||||
V1 | DC24V(without cable) |
| |||||||||||||||||||
V2 | AC220V(with cable ) |
| |||||||||||||||||||
|
| Sensor to Convertor distance | m(10 meter cables, 5meter per cable; special cable length requirement available, but longer than 100m is not suggested.) |
| |||||||||||||||||
|
|
| |||||||||||||||||||
TUF2000 SW B1 050 0 1.6 ER8 V1 10 Whole Spec. |