Products

Brass Water Meter Ball Valve with Female and Free Nut

China Brass Water Meter Ball Valve with Female and Free Nut, Find details about China Forged Brass Ball Valve, Brass Ball Valve with Steel Handle from Brass Water Meter Ball Valve with Female and Free Nut

Model NO.
BBV04
Type
Fixed Ball Valve
Function
Blow-Down Valve, Relief Valve, Atmospheric Valve, Bypass-Valve
Temperature
Normal Temperature
Application
Industrial Usage, Water Industrial Usage, Household Usage
Valve Certificate
ISO9001, Ce,Acs.UL,CSA
Pressure
Medium Pressure
Technical
Forged
Working Temperature
-10-110ºC
Trademark
xbfm/ OEM
Transport Package
Polybag, Inner Boxcarton and Wooden Pallet
Specification
1/2"--1
Origin
Zhejiang, China
HS Code
8481804090
Model NO.
BBV04
Type
Fixed Ball Valve
Function
Blow-Down Valve, Relief Valve, Atmospheric Valve, Bypass-Valve
Temperature
Normal Temperature
Application
Industrial Usage, Water Industrial Usage, Household Usage
Valve Certificate
ISO9001, Ce,Acs.UL,CSA
Pressure
Medium Pressure
Technical
Forged
Working Temperature
-10-110ºC
Trademark
xbfm/ OEM
Transport Package
Polybag, Inner Boxcarton and Wooden Pallet
Specification
1/2"--1
Origin
Zhejiang, China
HS Code
8481804090

Brass Water Meter Ball Valve with Female and Free Nut

Brass Water Meter Ball Valve with Female and Free Nut

 Product Description : 

 High Quanlity Aluminum Handle Ball Valve Male End with Free Nut

  • Material: Forged Brass ( CW617N, CW614 ,CW602N,ASTM C37700) 

  • Size: DN15 , DN20, D25mm 

  • Thread standard: Free Nut according to ISO228, ISO7/1, DIN2999/DECA fittings
    For the handle, it could be changed to magnetic Type, Brass Handle, or Zinc Alloy Handle

  • Package details: Each valve by one polybag, inner box, Cartons with pallets

  • Technical Specification:

  • Working pressure: 1.6Mpa 

  • Tested Pressure: 2.0Mpa 

  • Working medium: Water, oil, gas 

  • Working temperature: -20° C≤ T≤ 120° C

Installation Instruction:
 
1Before Installing the valves, clean and remove any objests from the pipes
2Ensure both connection pipes either side of valves and aligned
3Ensure that two sections of the pipe match, and the valves until will not accept any
 gaps, any distroy in the pipes may affect the tighting of the connection, The work
 of the vales and can even casue a rupture. To be sure, place the kit in position to
 ensure the assembling will work
4Before starting the fittings, ensure the threads and tappings are clean
5If secton of pipes have not their final support in that place, They can be temporatily
 fixed, In order to avoid unnecessary strain on the valves
6The theoretical lenghts gived by ISO7/1 for the tapping are typically longer than
 required, The length of the thread should be limited, and check that the end of tube
 does not press right up to the head of the thread
7For the sealing assembly valves pipes, it is essential to use products that are
 compatible with the requirements of the clean water meter
8Position the pipe clips on both side of the valves
9If mounting on an air conditioning with Per tubing and hoses, it is is necessary
 to support the tubes and hoses with the fixed to abvoid strain on valves
10When screwing the valves, ensure you only rotate on screws side by the 6 ended
 side, Use an open ended spanner or an adjustable spanner and not a monkey
 wrench. Never use a vice to tighten the fixing of the valves
11Do not over tighten the valves, Do not block with any extensions as it may cause a
 rupture or weekening of the forging strenght. The Torque force not more than 30Nm

 

    General Guidelings :

    1Ensure that the valves to be used are appropriate for the condition of the installation
    2Be sure to have enough valve to be able to isolate the section of pipes as well as
     the approciate equipment for maintenance and repair
    3Ensure that valves to be installed are of correct strenght to be able to support the
     capacity of their usage
    4Installation of all circuits should ensure their function can be automatically tested on
     a regular basis ( at least two times per year)

     

    Machining Process

    Brass Water Meter Ball Valve with Female and Free Nut
     

    Why Choose US

     

     

    We control the material of PTFE(Teflon) and stainless steel wires per customer's request.

    Some are from Japan and Taiwan, some are from China local. Only choose high quality material.

    We test leakage of each roll before braiding, then we cut 300mm and crimp it to test

    burst pressure after brading.

    We use CNC Lathes Machine for end fittings production. Machine system, knife and inspection

    tools are all imported from Japan.

    We use Techmaflex Crimping Machine which is imported from France. This machine has

    accurate and stable performance for crimping because it is produced for PTFE hose crimping only.

    Contact to this supplier


      http: xbvalve.en.made-in-china.com    xbvalve.en.made-in-china.com
     

    You Might Also Like