Powder Coating Room Furnace with Electric Heaters for Security Door (ZC-PCO47502E)
China Powder Coating Room Furnace with Electric Heaters for Security Door (ZC-PCO47502E), Find details about China Powder Coating Machine, Coating Machine from Powder Coating Room Furnace with Electric Heaters for Security Door (ZC-PCO47502E)
Basic Info.
Model NO.
ZC-PCO47502E
End Door
1set or 2 Sets
Heating System
Electric
Delivery Time
15days
Guide Rail
1 Set
Trademark
Leantro
Transport Package
Carton Box
Specification
4750*2300*2400mm
Origin
China
HS Code
8468800000
Model NO.
ZC-PCO47502E
End Door
1set or 2 Sets
Heating System
Electric
Delivery Time
15days
Guide Rail
1 Set
Trademark
Leantro
Transport Package
Carton Box
Specification
4750*2300*2400mm
Origin
China
HS Code
8468800000
Product Desciption
Powder Coating Room Furnace with Electric Heaters for Security Door (ZC-PCO47502E)
1. Professional manufacturer of powder coating oven
2. Not the lowest price, but the moderate one.
3. Professional sales & after-sales team.
4. Timely delivery.
INTRODUCTION:
The batch oven is much suitable for the factory, whose production output is not large.
It's equipped with floor all inside and outside of the cabin.
The workers need to put the products on the trolley, then push the trolley into the oven.
Finally start the heating of the oven, to get the finished products.
Cabin System: Rock wool sandwich panel, 100mm thick, density is 120kg/m3. Outside is 0.476mm thick colorful steel, inside is 0.426mm thick galvanized steel, anti-flame, and heat insulation.
Heating System (Electrical): 304 stainless steel heating element, 39kW in total.
The heating elements are installed to the bottom and two sides of the oven, ensure the temperature is uniform in the oven.
Control System: 1 unit, including oven temperature setting, holding time setting, oven indication, power switch, power indicator, working indicator, heating indicator.
Guide Rail: 1 set of steel rail for pushing the trolley in and out. 4 pcs of wheels and 2 pcs of beams for making the trolley.
End Door: 1 set of swing doors for in and out, with lift lock.
WHO WE ARE
Shandong Leantro Green-tech Co., Ltd is a direct manufacturer founded in 2007. It's located in Zouping County, where is one of China's top 100 counties. The factory working area is 6,000 m2. The transportation around is very convenient, it only needs half an hour's drive from the High-Speed Rail Station and an hour's drive from Jinan International Airport.
WHAT WE DO
Since its establishment, the company has been committed to the research and development of spray paint room, dust removal equipment, electrostatic powder spraying equipment, welding fume extractor, CO catalytic combustion equipment, VOCs and relevant production work.
In addition to product produce and supply, the company provides complete solutions for its customers by offering all services required in engineering, pre-sales, and after-sales. Conscious of the impossibility of providing a single solution for all customers, due to many different types of equipment and applications in the market.
Leantro holders of ISO 9001, ISO 14001, CE, SGS and BV certificates are able to provide a specific solution for each customer thanks to its know-how in utilizing standard components in systems created for different applications.
Through direct and indirect sales. Leantro products have reached customers all over the world where their quality and efficiency have been appreciated. In accordance with its goal of becoming a global brand, the company has phased in its export activities through its dealer network in Europe, Middle East, America, Oceania and Southeast Asia sparing no effort to establish its quality in products and services.
WHY THE US
-System Solutions
Having adopted the philosophy of production without compromising quality. Leantro focuses its services on system solutions and providing specific products for special requirements.
-Working Attitude
Since our establishment, it has been more important than any earnings to never compromise our trustworthy and honest attitude towards our customers, business associates. While moving further, we will not deviate from our ethical business concept that has brought us thus far.
-Production & Quality Control
During the production, quality is not a goal of us, but a part of our life. While continuously developing our production skills through our investments in computer-aided production tools, primarily robotic technologies, we have been able to make quality a standard.
-Product Design
While designing our products, we aim to exceed customer demands, rather than just meeting them. In utilizing our products for creating special systems solutions for different customers in various industries, we put special emphasis on cost and productivity.
-Customer Service
Whether a standard product or a complete system demand, we're able to understand all types of customer demands and offer the required services, thanks to our experience and know-how. Our OEM and end-user customers know well that we stand by all our products and provide necessary services during its entire service life.
FAQ
Q1. Where are your factory and company?
We are located at Mingji Industry Zone, Zouping City, Shandong Province, China
Welcome to have a visit.
Q2. How do you control your quality?
Our factory is ISO and SGS certified. We have our own QA and QC team.
They will check on the site and finished products to ensure all details to meet our highest standard and the customer's requirements.
Q3. What are your payment terms?
We accept T/T, L/C, Western Union, etc.
Q4. How about your lead time and terms of delivery?
Our lead time is 7 to 15 days after your deposit.
Normally our quotation is under FOB Qingdao.
Q5. Can you produce according to the technical drawings?
Yes, we can produce by your technical drawings or requirements.
We can make drawings for you.
1. Professional manufacturer of powder coating oven
2. Not the lowest price, but the moderate one.
3. Professional sales & after-sales team.
4. Timely delivery.
INTRODUCTION:
The batch oven is much suitable for the factory, whose production output is not large.
It's equipped with floor all inside and outside of the cabin.
The workers need to put the products on the trolley, then push the trolley into the oven.
Finally start the heating of the oven, to get the finished products.
Cabin System: Rock wool sandwich panel, 100mm thick, density is 120kg/m3. Outside is 0.476mm thick colorful steel, inside is 0.426mm thick galvanized steel, anti-flame, and heat insulation.
Heating System (Electrical): 304 stainless steel heating element, 39kW in total.
The heating elements are installed to the bottom and two sides of the oven, ensure the temperature is uniform in the oven.
Control System: 1 unit, including oven temperature setting, holding time setting, oven indication, power switch, power indicator, working indicator, heating indicator.
Guide Rail: 1 set of steel rail for pushing the trolley in and out. 4 pcs of wheels and 2 pcs of beams for making the trolley.
End Door: 1 set of swing doors for in and out, with lift lock.
WHO WE ARE
Shandong Leantro Green-tech Co., Ltd is a direct manufacturer founded in 2007. It's located in Zouping County, where is one of China's top 100 counties. The factory working area is 6,000 m2. The transportation around is very convenient, it only needs half an hour's drive from the High-Speed Rail Station and an hour's drive from Jinan International Airport.
WHAT WE DO
Since its establishment, the company has been committed to the research and development of spray paint room, dust removal equipment, electrostatic powder spraying equipment, welding fume extractor, CO catalytic combustion equipment, VOCs and relevant production work.
In addition to product produce and supply, the company provides complete solutions for its customers by offering all services required in engineering, pre-sales, and after-sales. Conscious of the impossibility of providing a single solution for all customers, due to many different types of equipment and applications in the market.
Leantro holders of ISO 9001, ISO 14001, CE, SGS and BV certificates are able to provide a specific solution for each customer thanks to its know-how in utilizing standard components in systems created for different applications.
Through direct and indirect sales. Leantro products have reached customers all over the world where their quality and efficiency have been appreciated. In accordance with its goal of becoming a global brand, the company has phased in its export activities through its dealer network in Europe, Middle East, America, Oceania and Southeast Asia sparing no effort to establish its quality in products and services.
WHY THE US
-System Solutions
Having adopted the philosophy of production without compromising quality. Leantro focuses its services on system solutions and providing specific products for special requirements.
-Working Attitude
Since our establishment, it has been more important than any earnings to never compromise our trustworthy and honest attitude towards our customers, business associates. While moving further, we will not deviate from our ethical business concept that has brought us thus far.
-Production & Quality Control
During the production, quality is not a goal of us, but a part of our life. While continuously developing our production skills through our investments in computer-aided production tools, primarily robotic technologies, we have been able to make quality a standard.
-Product Design
While designing our products, we aim to exceed customer demands, rather than just meeting them. In utilizing our products for creating special systems solutions for different customers in various industries, we put special emphasis on cost and productivity.
-Customer Service
Whether a standard product or a complete system demand, we're able to understand all types of customer demands and offer the required services, thanks to our experience and know-how. Our OEM and end-user customers know well that we stand by all our products and provide necessary services during its entire service life.
FAQ
Q1. Where are your factory and company?
We are located at Mingji Industry Zone, Zouping City, Shandong Province, China
Welcome to have a visit.
Q2. How do you control your quality?
Our factory is ISO and SGS certified. We have our own QA and QC team.
They will check on the site and finished products to ensure all details to meet our highest standard and the customer's requirements.
Q3. What are your payment terms?
We accept T/T, L/C, Western Union, etc.
Q4. How about your lead time and terms of delivery?
Our lead time is 7 to 15 days after your deposit.
Normally our quotation is under FOB Qingdao.
Q5. Can you produce according to the technical drawings?
Yes, we can produce by your technical drawings or requirements.
We can make drawings for you.
You Might Also Like
Deutz 1015 Mounting Foot 02245926 Diesel Engine Parts
Kh 150 Hot Sale Small Chocolate Machine
Pulverized Lime Powder Ball Pressing Machine Yhg Series Briq......
Animal Sculpture of Elephant Bronze Elephant Statue on The L......
French Antique Louis Xiv Oval Back Living Room Chairs
High Quality Moulded Case Circuit Breaker with Ce (ELM1 Seri......
Sondex S37b Plate Heat Exchanger Machine with High Quality
AES Csm Dry Running Cartridge Seal, Agitator Seal Mechanical......
Promotion Knitted Hat/Warm Cap with Cuff (DH-K109)
Low-Priced Bulk Laundry Detergent Liquid Sold to Africa
Roller Centralizerwire Casing Rigid
Indexable Milling Cutters Onhu/Onhu08t624r-GM