China Terek Brand High Quality N2/N2o/H2/O2/CH4/CO2 Gas Booster Pump System Unit., Find details about China LPG Filling Pump Gas, Gas Filling Machine from Terek Brand High Quality N2/N2o/H2/O2/CH4/CO2 Gas Booster Pump System Unit.
Product Description
The TEREK gas booster equipment USES pure compressed air as the driving power source, and USES gas booster pump as the pressure source, nitrogen, oxygen, helium,N2O,Argon, CO2 and other gases as the pressurized medium. The output pressure is proportional to the driving gas pressure. By adjusting the pressure of the driving gas source, the corresponding pressure of the pressurized gas can be obtained.
When the pressure of the driving gas source is balanced with that of the pressurized gas, the pneumatic booster pump will be automatically stops and the output gas pressure is stabilized at the preset pressure. Therefore, it has the features of explosion-proof, energy saving, environmental protection, adjustable output pressure, small volume, light weight, simple operation, reliable performance and wide application range.
To operate this system, The drive gas from the air compressor is required to start the TEREK booster pump. The pressure of the drive gas can be adjusted by valves and pressure gauges, and the output gas pressure can be adjusted
The expected working pressure can be achieved by adjusting the pressure of the drive inlet.. When the driving air pressure and the output pressure are balance, the pump stops filling pressure and the output pressure remains at the preset value.
Product parametersType | Pressure ratio | Min gas inlet pressure PA | Max gas inlet pressure PA | Max permitted outlet pressure PB | Formula to calculate gas outlet pressure PB | Max flow LN/min (PL=6bar) | |||
bar | psi | bar | psi | bar | psi | ||||
GU-GTC10 | 10:1 | 5 | 72.5 | 80 | 1160 | 80 | 1160 | 10PL+PA | 372(PA=20bar) |
GU-GTC25 | 25:1 | 10 | 145 | 200 | 2900 | 200 | 2900 | 25PL+PA | 154(PA=20bar) |
GU-GTC40 | 40:1 | 15 | 217.5 | 320 | 4640 | 320 | 4640 | 40PL+PA | 92(PA=20bar) |
GU-GTC60 | 60:1 | 25 | 362.5 | 480 | 6960 | 480 | 6960 | 60PL+PA | 115(PA=40bar) |
GU-GTC100 | 100:1 | 35 | 507.5 | 800 | 11600 | 800 | 11600 | 100PL+PA | 74(PA=40bar |
Product name | Pneumatic gas booster pump pressure control bench |
Model | GU-GTC-40 |
Pressure ratio | 40:1 |
Medium | Nitrogen or Oxygen ,Helium ,Argon.Co2 ,N2O. and so on |
Maximum outlet pressure | 320bar (32MPA) |
Maximum outlet flow | 92 L/min (Inlet gas pressure 20bar) |
Maximum outlet flow | 184 L/min (Inlet gas pressure 40bar) |
Min gas inlet pressure | 15 bar |
Max gas inlet pressure | 320 bar |
Power source | TEREK gas booster pump |
Control unit | High pressure needle valve |
Pressure control accuracy | less than 1%F.S; |
Pressure measurement accuracy | 0.4 pressure gauge |
Valves and piping | High pressure needle valve and stainless steel piping |
Connection size(inch) Gas inlet | NPT1/4 Female thread |
Connection size(inch) Gas Outlet | NPT1/4 Female thread |
Equipment Weight | 45KG |
Export standard wooden case Weight | 55KG |
Equipment Dimension | 600*450*570 mm |
Packing size: | 660*520*570 mm |
Production time | 10-12days |
Delivery place | The goods can be delivered by air express to your designated address |
Air express Delivery time | 4-5days |
System configuration:
TEREK gas booster pump uses compressed air to drive large area end piston to small area end to get high pressure gas output.. Can be used for compressed air and other gas, the output pressure can be adjusted by inlet valve, The output can ensure gas is not contaminated. Automatic pressure maintaining. Driven by gas, No spark or Flame and No generating heat, Can use it in dangerous places.
GU-GTC series gas booster unit control cabinet mainly includes one set of GTC series air-driven gas booster pump, pressure gauges, air filter, gas inlet filter, control valves, air regulating valve, pipelines, cabinet, and pressure release valve etc.
In order to ensure the long-term use and stable working efficiency of the equipment, we provide a set of sealing accessories, repair kit, sealing tape, etc .
Product advantages
1.Specially suitable to the high pressure tests and ultra-high pressure tests in the field or in the workshop
2. The pump will stop working automatically when the output pressure reaches the preset value,
3. Maintain long working hours with no energy expenditure
4.No dissipated heat during the pressure holding phase
5.No risk for explosion and spark in oil and gas field
6. The pump will start automatically when the outlet pressure drops slightly or the air drive pressure increases.
7. The working pressure can be adjusted by adjusting the pressure of the driven air.
1.Pressure test with gas
2.Gas transfer and filling(Argon/Helium/Hydrogen/Oxygen/Nitrogen/CO2/NO2/CH4/LNG/LPG/CNG/FM200 etc.)
3.Charging of gas cylinder and accumulator with nitrogen
4.Supply for isolating gas systems
5. High pressure gas injection system for various industries
6.Transfer of oxygen cylinders
7.Charging of breathing air bottles
8.Leak test
9.Hydrostatic Testing for valves, tanks, pressure vessels, pressure switches, hoses, pipes and tubing, pressure gauges, cylinders, transducers, well casings, gas bottles and air craft components
Shandong TEREK Manufacture & Trading Co.,LTD was established in 2000.
TEREK Company focus on provide various kinds of pneumatic and hydraulic booster pumps, Safety valve test bench, booster systems and pressure solutions to the customers all over the world ,
With more than 18 years experiences in fluid pressure exchange and controlling field.Good quality products and perfect after-sale service have won us a good reputation and a lot of customers both at home and abroad.
FAQ
1.Q : Are you manufacturer ?
A: Yes, We are the manufacturer with continuous and improved R&D. Production, Quality Check and service supply.
2.Q : Can I get your price list ?
A: Yes, Sure. In order to send you our available offered price. Please choose the products and let us know the product model and requirement in detail.
3.Q : Do you have stock for all items?
A:In general, we have some stock, while if you need a bulk order, we still need time to produce it. Of course, we will inform all details you before your payment.
4.Q : What is payment terms ?
A: Sample order : 100% full payment before start to production;
Large order : 30% deposit first, 70% pay after see the BL copy ;
5.Q: Can give free sample ?
A : Free : if small spare parts and the cost not too much is ok ;
Not Free : the cost expensive and all the machine can not be free ;
6.Q : How long can be finished the goods ?
Delivery date: 10-15 working days after deposit paid
Two years warranty, when the products reach to destination.