Horizontal Centrifugal Pumps Stainless Steel
China Horizontal Centrifugal Pumps Stainless Steel, Find details about China Horizontal Centrifugal Pumps, Stainless Steel Pumps from Horizontal Centrifugal Pumps Stainless Steel
Basic Info.
Position of Pump Shaft
Horizontal Pump
Mounting Height
Suction Centrifugal
Impeller
Closed
Size
~DN800
Flow
~1000m3/H
Head
~2000m
Temperature
-80~450 Degrees Celsius
Pressure
~25MPa
Trademark
Dalian Kehuan Pump Co., Ltd
Transport Package
Woodencase
Specification
API 610 standard
Origin
Dalian, Liaoning, China
HS Code
8413709990
Position of Pump Shaft
Horizontal Pump
Mounting Height
Suction Centrifugal
Impeller
Closed
Size
~DN800
Flow
~1000m3/H
Head
~2000m
Temperature
-80~450 Degrees Celsius
Pressure
~25MPa
Trademark
Dalian Kehuan Pump Co., Ltd
Transport Package
Woodencase
Specification
API 610 standard
Origin
Dalian, Liaoning, China
HS Code
8413709990
Product Desciption
Product introduction
Horizontal Centrifugal Pumps Stainless Steel
Applications ranges:
For pumping clean or slightly polluted, cold or hot, chemically neutral or aggressive liquids.
Sizes 25 up to 400mm
Capacities Q up to 2600m3/h
Heads H up to 250m,
Operating pressures P up to 5.0 MPa
Operating temperatures T -80 up to +450°C
Design:
Cast steel , LTCS
Chrome steel CA15/CA6NM
Austenitic Stainless steel
Duplex steel
Super Duplex steel
Hastelloy
Titanium C2, C3
Titanium alloy C5,C12
904L
Alloy 20
*It depends the customer's request.
Company profile
Dalian Kehuan Pump Co.,Ltd was established in 2002 ,Registered capital:50 million RMB. The factory covers an area of 20,000 square meters. and the workshop area is more than 10,000 square meters.
There are 150 employees, and many of the main management and technical personnel are from well-known pump companies. Sales in the last three years have remained within the range of 100 to 120 million.
Kehuan Pumps specializes in the research and development, design, manufacturing and continuous improvement of high level magnetic pumps. The original intention of the general manager is to believe that technology and environmental protection are the major trends and future themes. We advocate: Enjoy technology and protect the environment. This is also the origin of the company name.
Manufacturing Capacity
We have professional casting workshops and several outsourcing machining sub-contractors. All the casting parts are casted with plastic mould and metal die; impellers are casted by investment casting means,in order to guarantee excellent performance of products. Numerical control machine and all kinds of machining equipment with high precision as well as advanced machining process and excellent management mode can ensure manufacturing of pumps with perfect Performance.
First Class Inspection Ability
We have more than 30 inspection devices such as pump test station with national Level I qualification certificates, advanced balancing machine, metal analyzer, vibration meter, noise meter,roughness meter, hardness meter, paint thickness tester, mechanical seal rotation test and air tightness test devices as well as more than 500 various measurement instruments such as difference gauge, plug gauge, ring gauge, micrometer, tilt meter with high precision to ensure reliable and efficient pumps.
Technical Ability
Dalian Kehuan Pumps co.,Ltd. has its own technical development team including specialists,engineers and technicians who have a deep research on various pumps.
We can provide all kinds of services related to pumps quickly such as pump R&D,reconstruction and. to surveying and drawing.
*We design pumps and mechanical seal with the help of computer aided design software such as CAD and SolidWorks.
*All of our products meet the following international standards such as API 610, D1N, ANSI, ISO.
*We can design and optimize the pumps with our advanced technology in combination with customer's specific requirements.
*If you have any questions about our products, I hope you can contact me at your convenience.
Thank you for your concern.
Horizontal Centrifugal Pumps Stainless Steel
For pumping clean or slightly polluted, cold or hot, chemically neutral or aggressive liquids.
- in refineries, petrochemical industry, coal processing and low temperature engineering
- in chemical industry ,fibre and general processing industries, particularly in paper and pulp industries, sugar industry.
- in water industry, particularly sea-water desalination plants
- in heating and air-conditioning
- in fossile and nuclear power stations
- in environmental protection engineering
- in ship and offshore industries
Sizes 25 up to 400mm
Capacities Q up to 2600m3/h
Heads H up to 250m,
Operating pressures P up to 5.0 MPa
Operating temperatures T -80 up to +450°C
Design:
- Single-stage, horizontal ,radially spit volute casing pumps with feet below and single entry radial impeller, end suction branch, radially upwards discharge branch. Depending on operating conditions hydraulic balance provided by front or rear wear rings and balance holes. Casing cover with cooling or heating connections, shaft sealing by packings or mechanical seals of any design (single-or double working), connections for cooling,
- flushing or sealing liquid.
- Standardized pipework according to API plans. Cooling of baseplate pedestal
- possible. Flanges possible according to DIN or ANSI.
- Same nominal pressure for suction and discharge flanges.
- Direction of rotation clockwise seen from driven end.
- Sulfuric acid, nitric acid, hydrochloric acid ,
- phosphoric acid for organic acid and inorganic acid which at various temperature and concentration.
- Sodium hydroxide, sodium carbonate and alkaline liquid at various temperature and concentration.
- All kinds of salt solution.
- Various liquid petrochemical products, organic compound as well as raw materials with corrosion behaviours and the products.
Cast steel , LTCS
Chrome steel CA15/CA6NM
Austenitic Stainless steel
Duplex steel
Super Duplex steel
Hastelloy
Titanium C2, C3
Titanium alloy C5,C12
904L
Alloy 20
*It depends the customer's request.
| S-5 | S-6 | C-6 | S-8 | A-7 | A-8 | D-1 | D-2 | |
| Casing | Cast steel | Cast steel | CA15/CA6NM | Cast steel | AUST SS | 316 AUS | DUPLEX | SUPER DUPLEX |
| Impeller | Cast steel | 12%CR | CA15/CA6NM | 316 AUS | AUST SS | 316 AUS | DUPLEX | SUPER DUPLEX |
| Shaft | AISI4140 | AISI4140 | SS420 | 316N | AUST SS | 316N | 2205 | 2507 |
| Wear rings | 12%CR | 12%CR | 12%CR | 316 Hard faced | AUST SSHard faced | 316 Hard faced | Duplex Hard faced | SUPER Duplex Hard faced |
| Bearing Frame | Cast steel | Cast steel | Cast steel | Cast steel | Cast steel | Cast steel | Cast steel | Cast steel |
Company profile
There are 150 employees, and many of the main management and technical personnel are from well-known pump companies. Sales in the last three years have remained within the range of 100 to 120 million.
Kehuan Pumps specializes in the research and development, design, manufacturing and continuous improvement of high level magnetic pumps. The original intention of the general manager is to believe that technology and environmental protection are the major trends and future themes. We advocate: Enjoy technology and protect the environment. This is also the origin of the company name.
Manufacturing Capacity
We have professional casting workshops and several outsourcing machining sub-contractors. All the casting parts are casted with plastic mould and metal die; impellers are casted by investment casting means,in order to guarantee excellent performance of products. Numerical control machine and all kinds of machining equipment with high precision as well as advanced machining process and excellent management mode can ensure manufacturing of pumps with perfect Performance.
First Class Inspection Ability
We have more than 30 inspection devices such as pump test station with national Level I qualification certificates, advanced balancing machine, metal analyzer, vibration meter, noise meter,roughness meter, hardness meter, paint thickness tester, mechanical seal rotation test and air tightness test devices as well as more than 500 various measurement instruments such as difference gauge, plug gauge, ring gauge, micrometer, tilt meter with high precision to ensure reliable and efficient pumps.
Technical Ability
Dalian Kehuan Pumps co.,Ltd. has its own technical development team including specialists,engineers and technicians who have a deep research on various pumps.
*We design pumps and mechanical seal with the help of computer aided design software such as CAD and SolidWorks.
*All of our products meet the following international standards such as API 610, D1N, ANSI, ISO.
*We can design and optimize the pumps with our advanced technology in combination with customer's specific requirements.
*If you have any questions about our products, I hope you can contact me at your convenience.Thank you for your concern.
You Might Also Like
10OZ Cotton Polyester Spandex For Jeans
Auto Wiper Motor for Renault Master, 7701050898
Indoor Commercial Trampoline Center for Shopping Mall
Neonpro Series Black White Transparent Straight Type Sleeve ......
Reliable DDP Railway Shipping From Yiwu Shenzhen to EU DDP t......
Ont T24 Plank Support Bench Press, Chest Push Bench Fitness ......
Large Capacity Fashion Stylish Gift Women Ladies Work Shoppi......
New Factory Price High Quality Pin Type Forklift Forks for S......
Natural Birch Wood Double Pointed Sticks
Prefabricated Steel Structure House Project for Logistics Ce......
OEM ODM Customized Home Workout Equipment Resistance Band fo......
Nonwoven Fabric Best Cheap Painter Absorbent Cotton Fleece