China Manufacturer 165KW 50 TR Industrial Water Cooling System For Plastic Injection Molding Machine Air Cooled Chiller
As a leading air cooled screw chiller supplier,MGREENBELT provides a complete range of air-cooled screw chiller,  with cooling capacity from 20Ton to 150Ton/80KW to 530KW and the chiller temperature control range is +30ºC to -30ºC.
Besides the standard air-cooled screw chiller control temperature of 7ºC to 25ºC, MGREENBELT also has air-cooled glycol screw chiller control temperature below zero from 0ºC to -30ºC.

Water Chiller General Introduction

Outlet water temeprature:  +7 C° to 30C°
Power Supply: 3PH-380V-50Hz, or based on user local need.
Refrigerant: R22 / R407c / R134a / R404a .
Chiller Cooling Capacity: 20 ton ~ 150 tons
Semi-hermetic screw type compressor
Air-cooled type condenser
Closed loop shell and tube evaporator
No need to install a cooling tower


MGREENBELT Water Chiller Description
60HP Hanbell Screw Type Air Cooled Water Chiller for Cooling Water Tank
As a leading air cooled screw chiller supplier, MGREENBELT Chiller provides a complete range of air-cooled screw chiller from MG-CS series, with cooling capacity from 50Ton to 580Ton/130KW to 1950KW and the chiller temperature control range is +30ºC to -30ºC.

Besides the standard air-cooled screw chiller control temperature of 7ºC to 30ºC, TopChiller also has air-cooled glycol screw chiller control temperature below zero from 0ºC to -30ºC

Hanbell / Bitzer/Fusheng Compressor 
New screw type compressor with 20%-30% higher in efficiency.
Cooling capacity control available at four steps (100%-75%-50%-25%), three steps (100%-66%-33%) or no steps control system.
High efficiency, low noise and vibration, easy to install.
Environmental protection refrigerant R134a, R407c available.


Heat exchanger
Shell and tube evaporator, high efficiency and cleanable(plat type available on request.
Aluminum fin type condenser with adequate heat exchanging surface.
Refrigeration solenoid valve, to protect compressor when stop.
Refrigerant sight glass, to further monitor the refrigerant status in the system, so to check the unit running status.

Microcomputer Control System Or  PLC Control System
The intelligent control system of microcomputer is precisely controlled, Simple operation, intelligent start and stop, Precision temperature control within 5 to 45 degrees of arbitrary adjustment, LCD display, all kinds of faults at a glance, Monitor ingends in real time, Multiple protection features, The Chinese and English interface sits to switch, To meet the needs of different users, Easy to operate.

Schneider Electrical Systems
Protection system built-in compressor superload protector, circulating water pump superload, system high and low pressure protector, compressor start electronic time delay, German SIEMENS electronic products, with a sound electrical protection system.

Each air cooled screw chiller designed from MGREENBELT has the following features:
China Manufacturer 165KW 50 TR Industrial Water Cooling System For Plastic Injection Molding Machine Air Cooled Chiller
Water temperature range 5ºC to 35ºC.   
Bitzer semi-hermetic screw compressor.
4 grade capacity control, 25%-50%-75%-100%.
Shell and tube evaporator, high efficiency and cleanable(plat type available on request).
Aluminum fin type condenser with adequate heat exchanging surface.
Refrigeration solenoid valve, to protect compressor when stop.
Refrigerant sight glass, to further monitor the refrigerant status in the system, so to check the unit running status.
Siemens PLC control, overall monitoring of unit running status.
Axial fan motor, with independent motor support bracket.
Multi-protection devices to make sure the chiller and the equipment running safety.
Schneider electrical components.
Danfoss/Emerson thermal components.

Unit Safety Protection
Compressor internal protection
Over current protection
High/low pressure protection
High discharge temperature alarm
Over temperature protection 
Flow switch
Phase sequence/phase missing protection
Anti freezing protection 


Specification for air cooled water chillers

1. Inlet water temperature 12°C, outlet water temperature 7°C, ambient temperature 35 °C
2. Working condition:The chilled water range: 5ºC to 30ºC. It is better to run the chiller in the ambient temperature at or below 40ºC.

Images for inejction moding chillers

Application Industry

China Manufacturer 165KW 50 TR Industrial Water Cooling System For Plastic Injection Molding Machine Air Cooled Chiller
Air cooled screw chillers are also widely used in plastic processing and plastic machinery including: plastic injection molding, plastic extruders and extrusion line, blowing molding machine.
It can precisely control the exactly temperature , which requested by the modernized machinery production, and greatly improved the production efficiency and product quality. MGREENBELT Industrial chiller is a good partner for the modernized industry , which feather as easy to operate with reasonable design, high quality and complete range of specifications. 


MGREENBELT Our Company

Mgreenbelt Chillers has an outstanding long history for providing cooling solutions to the plastic injection cooling Industry. From 2.85 to 2015KW cooling capacity, we provide specific solution to satisfy variety of requirements. When your system requires cooling, we have the solution.  

We are a quality cooperative partner in business,and also are the long term friendship relation,so please do keep in touch with us,even though you have make the order or will make the order,thanks.

Service Team

A. 14 Months warranty and life time technical maintenance offered.
B. All extra parts for the machine can be purchased with agent price from Mgreenbelt
C. 24 Hours working phone call/Email/Skype/MSN/Wechat/Whatsapp/Trade manager online to support.
D. Professional technical team and sales person give you regarding troubleshooting procedures via Internet and Phone any time when needed.
E. Free and Professional Training at our Factory under the relaxed condition

FAQ

Q:How to choose a right chiller model?
A:Please make sure the details as follow:
When you send the inquiry to us, pls kindly send it with below technical  information.
1)water chiller type: Air cooled or water cooled
2)Cooling capacity:       _____    Kcal/hr  or   _____KW
3)Refrigerant:  R22 or others friendly R410A, R407C
4) Voltages and Frequency :   ______V/PH/HZ

Q: How to quote a accurate solution for you?
A: After make sure the cooling capacity,please inform us:
1.What's the power supply need? Phase/Voltage/Frequency.
2.What's the refrigerant need? R22/R407C/R410A/R134A and etc.

Application industry chillers

If this  water chiller not suitable for your working need, we have different chiller series, please choose it as follows. 
-Commercial Water Cooled Chiller
-Scroll type water cooled water chiller
-Screw type water cooled water chiller
-Flooded type water cooled water chiller
 
-Commercial Air Cooled Chiller
-Scroll type air cooled water chiller
-Screw type air cooled water chiller
 
-Industrial Chiller
-Air cooled industrial chiller
-Water cooled industrial chiller
-Glycol chiller 

 

As a professional industrial chiller manufactuer and solution provider , we can supply kinds of chillers to meet your different cooling requirement, if the chillers above is not workable for you, please feel free send needs to us directly.
MGREENBELT Contact Person: Libra Zhang